The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Eco-friendly high strength, high ductility engineered cementitious composites (ECC) with substitution of fly ash by rice husk ash
Open accessAbstract
In this study, an agricultural waste-rice husk ash (RHA) is proposed to substitute fly ash in high strength, high ductility engineered cementitious composites (ECC). The experimental results showed that the substitution of fly ash by RHA accelerated hydration process, promoted pozzolanic reaction, and refined pore distribution in ECC matrix, thereby increased compressive strength of ECC mixtures significantly from 82 MPa to 108 MPa. On the other hand, tensile properties of ECC mixtures were improved with addition of RHA, except ECC mixture with substitute ratio of 50% showed a slight reduction in strain capacity yet exhibited highest strength. At micro-scale, incorporating RHA into ECC reduced the theoretical complementary energy (Jb′) as a result of enhanced fiber/matrix interface, meanwhile, lowered crack tip toughness (Jtip) in ECC matrix which mainly due to the evidently increased modulus of ECC; subsequently lead to the increment of pseudo strain-hardening PSH (=Jb′/Jtip) index, and thus ductility.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Concrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
Global CO 2 emissions from cement production
Andrew, R. M. (2018) · Earth System Science Data · doi:10.5194/essd-10-195-2018 · Cited by 1,583
Steady‐State and Multiple Cracking of Short Random Fiber Composites
Li, V. C., & Leung, C. K. Y. (1992) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1992)118:11(2246 · Cited by 1,441
Porosity, pore size distribution and in situ strength of concrete
Kumar, R., & Bhattacharjee, B. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00942-0 · Cited by 899
Understanding the Filler Effect on the Nucleation and Growth of C‐S‐H
Berodier, E., & Scrivener, K. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.13177 · Cited by 882
Fiber-Bridging Constitutive Law of Engineered Cementitious Composites
Yang, E.-H., Wang, S., Yang, Y., & Li, V. C. (2008) · Journal of Advanced Concrete Technology · doi:10.3151/jact.6.181 · Cited by 535
Self-citationIsaia, G. C., Gastaldini, A. L. G., & Moraes, R. R. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(01)00057-9 · Cited by 491
The Filler Effect: The Influence of Filler Content and Surface Area on Cementitious Reaction Rates
Oey, T., Kumar, A., Bullard, J. W., Neithalath, N., & Sant, G. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12264 · Cited by 490
Chen, Y., Zhu, Y., Wang, Z., Li, Y., Wang, L., Ding, L., Gao, X., Ma, Y., & Guo, Y. (2011) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.01.006 · Cited by 394
Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials 1
Fixtures, L. (2009) · Cited by 375
Metadata
- Authors
- Zhang, Z., Yang, F., Liu, J.-C., & Wang, S.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 137
- Pages
- 106200
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W3080328715
- Cited by
- 305
- References
- 28
- FWCI
- 19.66
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Eco-friendly high strength, high ductility engineered cementitious composites (ECC) with substitution of fly ash by rice husk ash. https://app.cochat.ai/papers/10.1016/j.cemconres.2020.106200
- The paper
- Zhang, Z., Yang, F., Liu, J.-C., & Wang, S. (2020). Eco-friendly high strength, high ductility engineered cementitious composites (ECC) with substitution of fly ash by rice husk ash. Cement and Concrete Research. https://doi.org/10.1016/j.cemconres.2020.106200
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
