The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Development of ultra-high performance geopolymer concrete (UHPGC): Influence of steel fiber on mechanical properties
Abstract
Abstract This study reports the development of ultra-high performance geopolymer concrete (UHPGC) and overcoming the brittleness feature of geopolymer matrix by using different steel fibers. Four straight steel fibers with different aspect ratios and two different deformed steel fibers were investigated. Flowability, compressive strength and flexural behavior including strengths and deflection, and energy absorption capacity of UHPGC, were systematically evaluated. A deformation ratio of steel fiber was introduced to quantitatively correlate the steel fiber shape and the mechanical performance. The flowability of fresh UHPGC mixtures decreased when the fiber content and length increased, as expected, and was inconspicuously influenced by fiber shape. The increase in fiber content and the decrease of fiber diameter contributed to the improvement of the mechanical strengths of UHPGC. The flexural behaviors of UHPGC improved as the fiber volume and length increased, while the compressive and first crack strengths were affected by both curing conditions and fiber dosages as well. Different from Portland cement-based composites, the corrugated fibers with a higher deformation ratio added in UHPGC, had an inferior strengthening and toughening efficiency, while for straight fibers, those longer and smaller in diameter were more preferred. Finally, based on the previous research, a new one with adjustment and simplification was proposed for that of newly-developed UHPGC, and the fitted results had higher correlation coefficients (r2).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
Self-citationMix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.002 · Cited by 1,149
Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review
Yoo, D.-Y., & Banthia, N. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.08.001 · Cited by 1,008
A review on ultra high performance concrete: Part II. Hydration, microstructure and properties
Wang, D., Shi, C., Wu, Z., Xiao, J., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.095 · Cited by 924
Self-citationEffects of steel fiber content and shape on mechanical properties of ultra high performance concrete
Wu, Z., Shi, C., He, W., & Wu, L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.028 · Cited by 865
Self-citationRecent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationYu, R., Spiesz, P., & Brouwers, H. J. H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.024 · Cited by 704
Wu, Z., Shi, C., He, W., & Wang, D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.02.010 · Cited by 492
Self-citationYoo, D.-Y., Lee, J.-H., & Yoon, Y.-S. (2013) · Composite Structures · doi:10.1016/j.compstruct.2013.07.033 · Cited by 482
Wu, Z., Shi, C., & Khayat, K. H. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107021 · Cited by 454
Self-citationMechanical properties of alkali-activated concrete: A state-of-the-art review
Ding, Y., Dai, J.-G., & Shi, C.-J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.121 · Cited by 448
Self-citationYoo, D.-Y., Kim, S., Park, G.-J., Park, J.-J., & Kim, S.-W. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.04.069 · Cited by 447
Yoo, D.-Y., Shin, H.-O., Yang, J.-M., & Yoon, Y.-S. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.10.081 · Cited by 400
Rashad, A. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.04.011 · Cited by 387
Durability of alkali-activated materials in aggressive environments: A review on recent studies
Zhang, J., Shi, C., Zhang, Z., & Ou, Z. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.027 · Cited by 374
Self-citationYoo, D.-Y., Kang, S.-T., & Yoon, Y.-S. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.007 · Cited by 364
Fracture properties of geopolymer paste and concrete
Pan, Z., Sanjayan, J. G., & Rangan, B. V. (2011) · Magazine of Concrete Research · doi:10.1680/macr.2011.63.10.763 · Cited by 352
A review on mixture design methods for geopolymer concrete
Li, N., Shi, C., Zhang, Z., Wang, H., & Liu, Y. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107490 · Cited by 351
Self-citationLe Hoang, A., & Fehling, E. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.130 · Cited by 339
Wu, Z., Khayat, K. H., & Shi, C. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.021 · Cited by 318
Self-citationZhang, Z., Zhu, Y., Yang, T., Li, L., Zhu, H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.09.147 · Cited by 296
Self-citationWetzel, A., & Middendorf, B. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.03.023 · Cited by 286
Yoo, D., Kim, S., Kim, J.-J., & Chun, B. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.02.058 · Cited by 282
The effect of fiber properties on high performance alkali-activated slag/silica fume mortars
Aydın, S., & Baradan, B. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.09.080 · Cited by 275
Pullout Behavior of High-Strength Steel Fibers Embedded in Ultra-High-Performance Concrete
Wille, K., & Naaman, A. E. (2012) · ACI Materials Journal · doi:10.14359/51683923 · Cited by 270
Li, N., Shi, C., & Zhang, Z. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.04.024 · Cited by 249
Self-citationAn overview on the reuse of waste glasses in alkali-activated materials
Liu, Y., Shi, C., Zhang, Z., & Li, N. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.02.007 · Cited by 246
Self-citationFlexural behavior of geopolymer composites reinforced with steel and polypropylene macro fibers
Bhutta, A., Borges, P. H. R., Zanotti, C., Farooq, M., & Banthia, N. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.11.014 · Cited by 245
Li, N., Shi, C., Zhang, Z., Zhu, D., Hwang, H.-J., Zhu, Y., & Sun, T. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.07.009 · Cited by 238
Self-citationDevelopment of ultra-high-performance geopolymer concrete
Ambily, P. S., Ravisankar, K., Umarani, C., Dattatreya, J. K., & Iyer, N. R. (2014) · Magazine of Concrete Research · doi:10.1680/macr.13.00057 · Cited by 193
Composition design and performance of alkali-activated cements
Li, N., Shi, C., Wang, Q., Zhang, Z., & Ou, Z. (2017) · Materials and Structures · doi:10.1617/s11527-017-1048-0 · Cited by 169
Self-citationEffect of drying procedures on pore structure and phase evolution of alkali-activated cements
Zhang, Z., Zhu, Y., Zhu, H., Zhang, Y., Provis, J. L., & Wang, H. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.12.003 · Cited by 167
Self-citationFracture properties of slag/fly ash-based geopolymer concrete cured in ambient temperature
Ding, Y., Shi, C.-J., & Li, N. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.138 · Cited by 165
Self-citationUniaxial Compression Behavior of Ultra-High Performance Concrete with Hybrid Steel Fiber
Wu, Z., Shi, C., He, W. L., & Wang, D. (2016) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001684 · Cited by 156
Self-citationDurability of alkali-activated fly ash concrete: Chloride penetration in pastes and mortars
Zhu, H., Zhang, Z., Zhu, Y., & Tian, L. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.110 · Cited by 135
Self-citationKöenig, A., Wuestemann, A., Gatti, F., Rossi, L., Fuchs, F., Fessel, D., Dathe, F., Dehn, F., & Minelli, F. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.03.227 · Cited by 67
Cited by
Alsalman, A., Assi, L. N., Kareem, R. S., Carter, K., & Ziehl, P. (2021) · Cleaner Environmental Systems · doi:10.1016/j.cesys.2021.100047 · Cited by 344
Rheology of alkali-activated materials: A review
Lu, C., Zhang, Z., Shi, C., Li, N., Jiao, D., & Yuan, Q. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104061 · Cited by 283
Self-citationLao, J.-C., Huang, B.-T., Fang, Y., Xu, L.-Y., Dai, J.-G., & Shah, S. P. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.107075 · Cited by 281
Recent progress in understanding setting and hardening of alkali-activated slag (AAS) materials
Jiang, D., Shi, C., & Zhang, Z. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104795 · Cited by 165
Self-citationLao, J.-C., Xu, L.-Y., Huang, B.-T., Zhu, J.-X., Khan, M., & Dai, J.-G. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1142237 · Cited by 86
Metadata
- Authors
- Liu, Y., Zhang, Z., Shi, C., Zhu, D., Li, N., & Deng, Y.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 112
- Pages
- 103670
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W3031082382
- Cited by
- 286
- References
- 37
- FWCI
- 20.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.