Influence of CO2 concentration on the performance of MgO cement mixes
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
This paper investigated the influence of different CO2 concentrations on the microstructural and mechanical development of reactive MgO cement (RMC) concrete. Combination of various analyses revealed the enhancement of hydrated magnesium carbonate (HMC) phases with relatively superior micro-mechanical properties as the CO2 concentration increased from ambient (~0.04%) to accelerated (5–20%) levels. The higher CO2 diffusion within samples cured under 5–20% CO2 increased the compressive strength by ~5 times. While samples cured under 20% CO2 revealed high early strengths, the formation of a dense HMC layer on the sample exterior led to limitations on further CO2 diffusion. Use of 5% CO2 produced comparable strengths as 20% CO2 at 28 days, highlighting the potential of using lower concentrations. Samples cured under 10% CO2 revealed the best performance at 28 days, thereby defining this environment as the most favorable condition for the development of microstructural and mechanical properties of RMC concrete.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gartner, E., & Sui, T. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.002 · Cited by 580
Accelerated carbonation of brucite in mine tailings for carbon sequestration
Harrison, A. L., Power, I. M., & Dipple, G. M. (2013) · Environmental Science & Technology · doi:10.1021/es3012854 · Cited by 328
Gadikota, G., Matter, J., Kelemen, P., & Park, A.-H. A. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp54903h · Cited by 247
Recovery of reactive MgO from reject brine via the addition of NaOH
Dong, H., Unluer, C., Yang, E.-H., & Al-Tabbaa, A. (2018) · Desalination · doi:10.1016/j.desal.2017.12.021 · Cited by 170
Self-citationKinetics studies on wet and dry gas–solid carbonation of MgO and Mg(OH)2 for CO2 sequestration
Fagerlund, J., Highfield, J., & Zevenhoven, R. (2012) · RSC Advances · doi:10.1039/c2ra21428h · Cited by 146
Montes-Hernandez, G., Renard, F., Chiriac, R., Findling, N., & Toche, F. (2012) · Crystal Growth & Design · doi:10.1021/cg300652s · Cited by 64
Cited by
Carbonate binders: Historic developments and perspectives
Hu, X., He, P., & Shi, C. (2024) · Cement and Concrete Research · doi:10.1016/j.cemconres.2023.107352 · Cited by 109
Nguyen, H., Santos, H., Sreenivasan, H., Kunther, W., Carvelli, V., Illikainen, M., & Kinnunen, P. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106696 · Cited by 77
Advances in the hydration of reactive MgO cement blends incorporating different magnesium carbonates
Dung, N. T., & Unluer, C. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123573 · Cited by 57
Self-citation
Metadata
- Authors
- Dung, N. T., Hay, R., Lesimple, A., Celik, K., & Unluer, C.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 115
- Pages
- 103826
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W3088666968
- Cited by
- 142
- References
- 6
- FWCI
- 5.13
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.