The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Sustainable use of red mud in ultra-high performance concrete (UHPC): Design and performance evaluation
Abstract
Abstract This paper presents an efficient application for red mud, i.e., recycling red mud as a mineral additive in the development of ultra-high performance concrete (UHPC). Specifically, the modified Andreasen & Andersen particle packing model has been carried out to obtain a densely compacted UHPC matrix. After that, red mud is used to replace cement to reduce both the landfilling of red mud and the environmental burden of UHPC. Then, the fresh and hardened behavior of UHPC with and without red mud has been evaluated. It has been found that the addition of red mud enhanced early-age (7 d) durability due to the accelerated hydration process, while reduced the workability and the mechanical properties of UHPC. The degraded workability may affect the application in the building with complex shapes, but it can still be applied in general construction. An ultra-high strength (>150 MPa) of UHPC including 40% red mud can be generated after high-temperature curing, although the addition of red mud reduces the compressive strength. Besides, it is noteworthy that significantly shortened setting time can be obtained when replacing cement by red mud, providing ideas for the application in the UHPC rapid-repairing process. The pore structure analysis reveals a coarsening of micro-pore structure with an increase of red mud content. Finally, a low-energy consumption, as well as low radiation risk further promotes the environmental protection application of red mud based UHPC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
A Practical Guide to Microstructural Analysis of Cementitious Materials
(2018) · CRC Press eBooks · doi:10.1201/b19074 · Cited by 2,110
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.002 · Cited by 1,149
Self-citationSynthesis and characterization of red mud and rice husk ash-based geopolymer composites
He, J., Jie, Y., Zhang, J., Yu, Y., & Zhang, G. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.11.010 · Cited by 770
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.024 · Cited by 704
Self-citationHabel, K., Viviani, M., Denarié, E., & Brühwiler, E. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.03.009 · Cited by 647
Wang, S., Ang, H. M., & Tadé, M. O. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.05.013 · Cited by 567
Packing density of cementitious materials: part 1—measurement using a wet packing method
Wong, H. H. C., & Kwan, A. K. H. (2008) · Materials and Structures · doi:10.1617/s11527-007-9274-5 · Cited by 556
The History, Challenges, and New Developments in the Management and Use of Bauxite Residue
Evans, K. (2016) · Journal of Sustainable Metallurgy · doi:10.1007/s40831-016-0060-x · Cited by 487
Cited by
Sharma, R., Jang, J. G., & Bansal, P. P. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103314 · Cited by 181
Liu, Z., Kong, D., Wang, L., Liu, A., Xu, F., Fang, Z., & Wang, S. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.113879 · Cited by 7
Metadata
- Authors
- Hou, D., Wu, D., Wang, X., Gao, S., Yu, R., Li, M., Wang, P., & Wang, Y.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 115
- Pages
- 103862
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W3096421631
- Cited by
- 260
- References
- 49
- FWCI
- 15.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Sustainable use of red mud in ultra-high performance concrete (UHPC): Design and performance evaluation. https://app.cochat.ai/papers/10.1016/j.cemconcomp.2020.103862
- The paper
- Hou, D., Wu, D., Wang, X., Gao, S., Yu, R., Li, M., Wang, P., & Wang, Y. (2021). Sustainable use of red mud in ultra-high performance concrete (UHPC): Design and performance evaluation. Cement and Concrete Composites. https://doi.org/10.1016/j.cemconcomp.2020.103862
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.