CoChat

Ambient temperature cured ‘just-add-water’ geopolymer for 3D concrete printing applications

Bong, Shin Hau, Xia, Ming, Nematollahi, Behzad, Shi, Caijun · 2021 · Cement and Concrete Composites
Cited by 193

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

Abstract

This paper aims to enhance the printability performance (namely open time and buildability) and mechanical properties (namely compressive strength) of a recently developed ‘one-part’ (just-add-water) geopolymer for 3D-concrete-printing (3DCP) applications. A combination of slag and fly ash was activated with two different grades of sodium silicate powders with different combinations. The influences of type and dosage of solid activators and the retarder content on the resultant geopolymers in fresh and hardened states were investigated using several mixtures to identify an optimum mixture. Subsequently, the printability performance (including open time, extrudability, buildability and shape-retention-ability), along with the rheological properties (including static yield stress evolution, dynamic yield stress, plastic viscosity and thixotropy) of the optimum mixture were evaluated. In addition, the printed specimens made of the optimum mixture were tested in compression and flexure in different directions. Based on the results, the optimum mixture exhibited a combination of long open time, and excellent extrudability, buildability, shape-retention-ability and thixotropic behavior, all of which are desirable for large-scale 3DCP applications. In addition, the high mechanical properties of the printed specimens ascertained the optimum mixture can be used for 3DCP of structural members. Moreover, the material sustainability indicators showed production of the optimum 3D-printable geopolymer mixture requires 14% less energy and emits 61% less CO2 than those of a 3D-printable Portland cement-based mixture with comparable compressive strength. It is anticipated that development of such 3D-printable ‘one-part’ geopolymers considerably promote large-scale applications and commercial viability of geopolymers in the context of 3DCP.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.cemconcomp.2021.104060

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 3 references

Cited by

Metadata

Authors
Bong, S. H., Xia, M., Nematollahi, B., & Shi, C.
Venue
Cement and Concrete Composites
Publisher
Elsevier BV
Published
2021-08
Volume
121
Pages
104060
ISSN
0958-9465 (ISSN-L)
OpenAlex
W3159240220
Cited by
193
References
3
FWCI
12.78
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.