The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
3D concrete printing of eco-friendly geopolymer containing brick waste
Open accessAbstract
This study investigates alkali-activated brick waste powder as the binder for developing 3D printable geopolymer mixes. The brick waste was used as a partial replacement to fly ash in geopolymer binders. The effect of brick waste content on the fresh properties of printable mixes, such as flow, setting time and rheological properties were investigated. Besides, the hardened properties of 3D printed brick waste geopolymer were evaluated with the varying brick waste content in the mix. The test results demonstrated that the fresh properties of 3D printable mixes were improved with the brick waste content in the mix. Compared to the control mix, the mixes containing brick waste displayed high yield strength and apparent viscosity at an early age. On the contrary, the hardened properties of compressive strength and interlayer strength of 3D printed concrete specimens were decreased with the high brick waste content; however, the incorporation of brick waste for up to 10% has enhanced the hardened properties. Finally, the sustainability assessment of brick waste geopolymer studied with embodied energy and carbon emission calculations reveals the proposed geopolymer concrete could reduce the embodied energy and carbon emission by up to 60–80%, compared to OPC concrete.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Cited by
Seawater sea-sand Engineered Geopolymer Composites (EGC) with high strength and high ductility
Lao, J.-C., Huang, B.-T., Xu, L.-Y., Khan, M., Fang, Y., & Dai, J.-G. (2023) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2023.104998 · Cited by 257
Metadata
- Authors
- Pasupathy, K., Ramakrishnan, S., & Sanjayan, J.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2023-04
- Volume
- 138
- Pages
- 104943
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W4315865197
- Cited by
- 169
- References
- 2
- FWCI
- 20.24
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D concrete printing of eco-friendly geopolymer containing brick waste. https://app.cochat.ai/papers/10.1016/j.cemconcomp.2023.104943
- The paper
- Pasupathy, K., Ramakrishnan, S., & Sanjayan, J. (2023). 3D concrete printing of eco-friendly geopolymer containing brick waste. Cement and Concrete Composites. https://doi.org/10.1016/j.cemconcomp.2023.104943
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.