The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slag
Open accessAbstract
An engineered cementitious composite (ECC) produced with ground granulated blast furnace slag was developed for the purpose of achieving moderately high composite strength while maintaining high ductility, represented by strain-hardening behavior in uniaxial tension. In the material development, single fiber pullout tests and matrix fracture tests were performed, followed by micromechanical analyses to properly select the range of mixture proportion. Subsequent direct tensile tests were employed to assess the strain-hardening behavior of the composite, which exhibited high ductility and strength with the addition of slag. High ductility is most likely due to enhanced workability and fiber dispersion performance which is attributed to the oxidized grain surface of slag, as verified by fiber dispersion tests. These results suggest that, within the limited slag dosage employed in the present study, the contribution of slag to fiber dispersion outweighs the side-effect of decreased potential for saturated multiple cracking, including a slight increase in matrix fracture toughness and fiber/matrix bond strength.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Steady‐State and Multiple Cracking of Short Random Fiber Composites
Li, V. C., & Leung, C. K. Y. (1992) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1992)118:11(2246 · Cited by 1,441
Fracture Processes in Concrete. Rock and Ceramics
van Mier, J. G. M., & Rots, J. G. (1991) · Cited by 141
The mineralogy and microstructure of three composite cements with high replacement levels
Hill, J., & Sharp, J. H. (2002) · Cement and Concrete Composites · doi:10.1016/s0958-9465(01)00041-5 · Cited by 83
Cited by
Fiber-reinforced geopolymer composites: A review
Ranjbar, N., & Zhang, M. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103498 · Cited by 651
Kang, S.-T., & Kim, J.-K. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.009 · Cited by 410
Self-citationGuo, P., Meng, W., Xu, M., Li, V. C., & Bao, Y. (2021) · Materials · doi:10.3390/ma14123143 · Cited by 114
Metadata
- Authors
- Kim, J.-K., Kim, J.-S., Ha, G. J., & Kim, Y. Y.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2007-07
- Volume
- 37
- Issue
- 7
- Pages
- 1096-1105
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2084798400
- Cited by
- 270
- References
- 3
- FWCI
- 18.02
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slag. https://app.cochat.ai/papers/10.1016/j.cemconres.2007.04.006
- The paper
- Kim, J.-K., Kim, J.-S., Ha, G. J., & Kim, Y. Y. (2007). Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slag. Cement and Concrete Research. https://doi.org/10.1016/j.cemconres.2007.04.006
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.