Predicting Mechanical Properties of High-Performance Fiber-Reinforced Cementitious Composites by Integrating Micromechanics and Machine Learning
Open accessThe DOI matches its Crossref record; 74 of the 75 references it cites were found in a registry or an index.
Abstract
Current development of high-performance fiber-reinforced cementitious composites (HPFRCC) mainly relies on intensive experiments. The main purpose of this study is to develop a machine learning method for effective and efficient discovery and development of HPFRCC. Specifically, this research develops machine learning models to predict the mechanical properties of HPFRCC through innovative incorporation of micromechanics, aiming to increase the prediction accuracy and generalization performance by enriching and improving the datasets through data cleaning, principal component analysis (PCA), and K-fold cross-validation. This study considers a total of 14 different mix design variables and predicts the ductility of HPFRCC for the first time, in addition to the compressive and tensile strengths. Different types of machine learning methods are investigated and compared, including artificial neural network (ANN), support vector regression (SVR), classification and regression tree (CART), and extreme gradient boosting tree (XGBoost). The results show that the developed machine learning models can reasonably predict the concerned mechanical properties and can be applied to perform parametric studies for the effects of different mix design variables on the mechanical properties. This study is expected to greatly promote efficient discovery and development of HPFRCC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








![Figure 9 Comparison of the prediction against the test results: (a) compressive strength [77]; (b) tensile strength [22]; and (c) tensile strain capacity [63].](https://figures.cochat.ai/paper-figures/766a584c3608442899ff66d1a6984e1c/predicting-mechanical-properties-of-high-performance-fiber-reinforced-figure-9.jpg)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“Specifically, physical laws describing micromechanical responses 139 , degradation mechanisms 104,140 , and chemical reactivity 141 have been utilized for data preprocessing (e.g., feature selection, feature engineering, and data augmentation) during the development of ML models in concrete research.”
From Machine learning in concrete science: applications, challenges, and best practices (2022) · cites this paper as [139]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
In Defense of Multiplicative Terms in Multiple Regression Equations
Friedrich, R. J. (1982) · American Journal of Political Science · doi:10.2307/2110973 · Cited by 1,059 · cited 1×
“Multicollinearity and Principal Component Analysis Multicollinearity may occur in high-dimension analysis and compromise the statistical significance of independent variables [69].”
BackgroundImproving support vector machine classifiers by modifying kernel functions
Amari, S., & Wu, S. (1999) · Neural Networks · doi:10.1016/s0893-6080(99)00032-5 · Cited by 936 · cited 2×
“Compared with the conventional regression methods, SVR employs kernel functions that enable the model to solve complex, non-linear problems because the relationships between some variables cannot be described using linear functions [43].”
Method(2002) · ACI Materials Journal · doi:10.14359/12325 · Cited by 761 · cited 2×
“where Jtip is the toughness of the matrix, and Jtip = Km(2)/Em; Em is the modulus of elasticity of the matrix; Km is the fracture toughness of the matrix, which can be tested using beams with a notch under three-point bending [22]; σss is the tensile strength under steady-state crack propagation process; and δss is th…”
BackgroundSelf-citationEnsemble Machine Learning: Methods and Applications
(2012) · doi:10.1007/978-1-4419-9326-7 · Cited by 746
Naderpour, H., Rafiean, A. H., & Fakharian, P. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.01.007 · Cited by 603 · cited 1×
“For example, an artificial neural network (ANN) was used to predict the compressive strength by using the water-to-cement ratio, the fly ash content, and the aggregate content [30].”
MethodA strain-hardening cementitious composites with the tensile capacity up to 8%
Yu, K., Wang, Y., Yu, J., & Xu, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.01.060 · Cited by 582
Fiber-Bridging Constitutive Law of Engineered Cementitious Composites
Yang, E.-H., Wang, S., Yang, Y., & Li, V. C. (2008) · Journal of Advanced Concrete Technology · doi:10.3151/jact.6.181 · Cited by 535 · cited 3×
“The toughness of the matrix must be less than the complementary energy from the fiber bridging [20].”
BackgroundSelf-citationMachine learning in concrete strength simulations: Multi-nation data analytics
Chou, J.-S., Tsai, C.-F., Pham, A.-D., & Lu, Y.-H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.09.054 · Cited by 472 · cited 4×
“Given a dataset with known mix designs and the corresponding mechanical properties, the weights and the bias are determined to minimize the discrepancy between the predicted and real mechanical properties through an optimization process [40], which is known as the training process.”
MethodInfluentialA Coefficient of Determination for Generalized Linear Models
Zhang, D. (2017) · The American Statistician · doi:10.1080/00031305.2016.1256839 · Cited by 444
Predicting compressive strength of lightweight foamed concrete using extreme learning machine model
Yaseen, Z. M., Deo, R. C., Hilal, A., Abd, A. M., Bueno, L. C., Salcedo-Sanz, S., & Nehdi, M. L. (2018) · Advances in Engineering Software · doi:10.1016/j.advengsoft.2017.09.004 · Cited by 434 · cited 2×
“, compressive strength) using a regression relationship [41].”
Method
Research works printed but not linked: 2
- Lewis, R.J. (2000, January 22–25). An introduction to classification and regression tree (CART) analysis. Proceedings of the Annual Meeting of the Society for Academic Emergency Medicine in San Francisco, San Francisco, CA, USA. Available online: http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.95.4103.
- Tabachnick, B.G., Fidell, L.S., and Ullman, J.B. (2007). Using Multivariate Statistics, Pearson. Available online: https://www.pearsonhighered.com/assets/preface/0/1/3/4/0134790545.pdf.
Cited by
Machine Learning for Structural Engineering: A State-of-the-Art Review
Thai, H.-T. (2022) · Structures · doi:10.1016/j.istruc.2022.02.003 · Cited by 748
Machine learning in concrete science: applications, challenges, and best practices
Li, Z., Yoon, J., Zhang, R., Rajabipour, F., Srubar III, W. V., Dabo, I., & Radlińska, A. (2022) · npj Computational Materials · doi:10.1038/s41524-022-00810-x · Cited by 388
Artificial Intelligence in Predicting Mechanical Properties of Composite Materials
Kibrete, F., Trzepieciński, T., Gebremedhen, H. S., & Woldemichael, D. E. (2023) · Journal of Composites Science · doi:10.3390/jcs7090364 · Cited by 249
AI-guided auto-discovery of low-carbon cost-effective ultra-high performance concrete (UHPC)
Mahjoubi, S., Barhemat, R., Meng, W., & Bao, Y. (2022) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2022.106741 · Cited by 172
Self-citationReview on automated condition assessment of pipelines with machine learning
Liu, Y., & Bao, Y. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101687 · Cited by 165
Self-citation
Metadata
- Authors
- Guo, P., Meng, W., Xu, M., Li, V. C., & Bao, Y.
- Affiliations
- Stevens Institute of Technology (US)
- Hebei University of Technology (CN)
- University of Michigan (US)
- Corresponding author
- Bao, Yi
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2021-06-08
- Volume
- 14
- Issue
- 12
- Pages
- 3143
- ISSN
- 1996-1944 (ISSN-L)
- PMC
- PMC8227936
- OpenAlex
- W3168590676
- Cited by
- 114
- References
- 75
- Citations by year
- 2026: 20 · 2025: 27 · 2024: 24 · 2023: 21 · 2022: 18 · 2021: 4
- FWCI
- 8.66
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Materials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Science Foundation (2046407)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Innovative concrete reinforcement materials
- Physical Sciences › Materials Science › Materials Chemistry › Machine Learning in Materials Science
- Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete
- Keywords
- HPFRCC, mechanical property prediction, micromechanics, ductility, compressive strength, tensile strength, artificial neural networks, support vector regression, XGBoost, classification and regression trees, principal component analysis, data cleaning
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Predicting Mechanical Properties of High-Performance Fiber-Reinforced Cementitious Composites by Integrating Micromechanics and Machine Learning. https://app.cochat.ai/papers/10.3390/ma14123143
- The paper
- Guo, P., Meng, W., Xu, M., Li, V. C., & Bao, Y. (2021). Predicting Mechanical Properties of High-Performance Fiber-Reinforced Cementitious Composites by Integrating Micromechanics and Machine Learning. Materials. https://doi.org/10.3390/ma14123143
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.