The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Calcined clay limestone cements (LC3)
Open accessAbstract
The use of supplementary cementitious materials (SCMs) to replace part of the clinker in cement is the most successful strategy to reduce CO2 emissions in the global cement industry. However, limited supplies of conventional SCMs make it difficult to take this strategy further unless new types of SCMs become available. The only type of material available in the quantities needed to meet demand is clay containing kaolinite, which can be calcined to produce an effective SCM. Such clays are widely available in countries where most growth in demand for cement is forecast. Calcined clays have previously been used as pozzolans, but calcination makes the economics of substitution marginal in a conventional pozzolanic blend. The major innovation presented here is the possibility to make a coupled substitution of cement with calcined clay and limestone. This allows much higher levels of substitution. Blends where calcined clay is used as a pozzolan, typically have clinker contents around 65–70%. Combination of calcined clay with limestone allows higher levels of substitution down to clinker contents of around 50% with similar mechanical properties and improvement in some aspects of durability. The replacement of clinker with limestone in these blends lowers both the cost and the environmental impact.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cement substitution by a combination of metakaolin and limestone
Antoni, M., Rossen, J., Martirena, F., & Scrivener, K. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.09.006 · Cited by 1,419
Self-citationFernandez, R., Martirena, F., & Scrivener, K. L. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.09.013 · Cited by 1,180
Self-citationThe role of calcium carbonate in cement hydration
Matschei, T., Lothenbach, B., & Glasser, F. P. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.10.013 · Cited by 1,100
Avet, F., Snellings, R., Alujas Diaz, A., Ben Haha, M., & Scrivener, K. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.02.015 · Cited by 767
Self-citationAlujas, A., Fernández, R., Quintana, R., Scrivener, K. L., & Martirena, F. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.01.028 · Cited by 539
Self-citationInteractions between alite and C3A-gypsum hydrations in model cements
Quennoz, A., & Scrivener, K. L. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.10.018 · Cited by 418
Self-citationCalculation of ionic diffusion coefficients on the basis of migration test results
Samson, E., Marchand, J., & Snyder, K. A. (2003) · Materials and Structures · doi:10.1007/bf02479554 · Cited by 372
Assessing, Understanding and Unlocking Supplementary Cementitious Materials
Snellings, R. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.12 · Cited by 348
Assessing the environmental and economic potential of Limestone Calcined Clay Cement in Cuba
Sánchez Berriel, S., Favier, A., Rosa Domínguez, E., Sánchez Machado, I. R., Heierli, U., Scrivener, K., Martirena Hernández, F., & Habert, G. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.125 · Cited by 335
Self-citationCancio Díaz, Y., Sánchez Berriel, S., Heierli, U., Favier, A. R., Sánchez Machado, I. R., Scrivener, K. L., Martirena Hernández, J. F., & Habert, G. (2017) · Development Engineering · doi:10.1016/j.deveng.2017.06.001 · Cited by 320
Self-citationMaraghechi, H., Avet, F., Wong, H., Kamyab, H., & Scrivener, K. (2018) · Materials and Structures · doi:10.1617/s11527-018-1255-3 · Cited by 271
Self-citationIndustrial trial to produce a low clinker, low carbon cement
Andrés, L. M. V., Berriel, S. S., Damas-Carrera, S., Pérez-Hernández, A., Scrivener, K. L., & Martirena-Hernández, J. F. (2015) · Materiales de Construcción · doi:10.3989/mc.2015.00614 · Cited by 137
Self-citationPilot scale manufacture of limestone calcined clay cement : The Indian experience
Krishnan, S. (2014) · Indian Concrete Journal · Cited by 101
Investigation of cement substitution by blends of calcined clays and limestone
Antoni, M. (2013) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · doi:10.5075/epfl-thesis-6001 · Cited by 68
Research works printed but not linked: 5
- Scrivener, 2014, Options for the future of cement, Indian Concr. J., 88, 11
- F. Wang, K. Kovler, J.L. Provis, A. Buchwald, S. Kamali-Bernard, L. Courard, K. Sideris, Metakaolin as an effective supplementary cementitious material, Chapter in State of the Art Report From Rilem TC SCM, (to be published).
- Emmanuel, 2016, Second pilot production of limestone calcined clay cement in India: the experience, Indian Concr. J., 90, 57
- Saad, 1982, Properties of mass concrete containing an active pozzolan made from clay, Concr. Int., 59–65
- Joseph, 2016, An economic analysis of the production of limestone calcined clay cement in India, Indian Concr. J., 90, 22
Cited by
Supplementary cementitious materials: New sources, characterization, and performance insights
Juenger, M. C. G., Snellings, R., & Bernal, S. A. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.008 · Cited by 1,260
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Reactivity of supplementary cementitious materials (SCMs) in cement blends
Skibsted, J., & Snellings, R. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105799 · Cited by 984
Zunino, F., & Scrivener, K. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106307 · Cited by 464
Self-citationAdvances in alkali-activation of clay minerals
Khalifa, A. Z., Cizer, Ö., Pontikes, Y., Heath, A., Patureau, P., Bernal, S. A., & Marsh, A. T. M. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106050 · Cited by 436
Metadata
- Authors
- Scrivener, K., Martirena, F., Bishnoi, S., & Maity, S.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 114
- Pages
- 49-56
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2769719797
- Cited by
- 1,763
- References
- 14
- FWCI
- 43.38
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Funders
- Swiss Agency for Development and Cooperation (81026665)
- Swiss National Science Foundation (IB6920-109118, IZ70Z0-124011)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.