The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Rheological requirements for printable concretes
Abstract
We study in this paper the rheological requirements for printable concrete in terms of yield stress, viscosity, elastic modulus, critical strain, and structuration rate. We first discuss the extrusion/deposition process at the level of the nozzle from a material perspective. We then focus on the rheological requirements needed to prevent the flow of one layer or the strength-based failure of the rising printed element. We moreover discuss the rheological requirements needed to control the final geometrical dimensions of one layer and of the entire object, including buckling stability and surface cracking. We finally describe the requirement for a proper intermixing of the layers interface and also note that drying of the upper surface of the layer at rest could also play a major role on the interlayer bond. Finally, we evaluate the effect of the use of printing supports (i.e. non-direct printing) on the above rheological requirements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
The origins of thixotropy of fresh cement pastes
Roussel, N., Ovarlez, G., Garrault, S., et al. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.09.004 · Cited by 995
Self-citationA thixotropy model for fresh fluid concretes: Theory, validation and applications
Roussel, N. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.05.025 · Cited by 967
Self-citationStructural built-up of cement-based materials used for 3D-printing extrusion techniques
Perrot, A., Rangeard, D., & Pierre, A. (2016) · Materials and Structures · doi:10.1617/s11527-015-0571-0 · Cited by 959
Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.001 · Cited by 846
Digital Concrete: Opportunities and Challenges
Wangler, T., Lloret, E., Reiter, L., Hack, N., Gramazio, F., Kohler, M., Bernhard, M., Dillenburger, B., Buchli, J., Roussel, N., et al. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.16 · Cited by 636
Self-citation(1986) · Cement and Concrete Research · doi:10.1016/0008-8846(86)90081-5 · Cited by 471
Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete
Zareiyan, B., & Khoshnevis, B. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.08.019 · Cited by 353
Analytical models for estimating yield stress of high-performance pseudoplastic grout
Yahia, A., & Khayat, K. H. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00476-8 · Cited by 321
Lloret, E., Shahab, A. R., Linus, M., Flatt, R. J., Gramazio, F., Kohler, M., & Langenberg, S. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2014.02.011 · Cited by 311
Yield stress during setting of cement pastes from penetration tests
Lootens, D., Jousset, P., Martinie, L., Roussel, N., & Flatt, R. J. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.01.012 · Cited by 279
Self-citationFresh self compacting concrete, a shear thickening material
Feys, D., Verhoeven, R., & De Schutter, G. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.02.008 · Cited by 251
Classification of building systems for concrete 3D printing
Duballet, R., Baverel, O., & Dirrenberger, J. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.08.018 · Cited by 238
Ovarlez, G., & Roussel, N. (2007) · Materials and Structures · doi:10.1617/s11527-005-9052-1 · Cited by 195
Self-citationAssessment of Thixotropy of Flowable and Self-Consolidating Concrete
(2003) · ACI Materials Journal · doi:10.14359/12548 · Cited by 163
Mesh‐Mould: Robotically Fabricated Spatial Meshes as Reinforced Concrete Formwork
Hack, N., & Lauer, W. V. (2014) · Architectural Design · doi:10.1002/ad.1753 · Cited by 155
The sharkskin instability of polymer melt flows
Graham, M. D. (1999) · Chaos An Interdisciplinary Journal of Nonlinear Science · doi:10.1063/1.166386 · Cited by 55
Portable Vane Test to Assess Structural Buildup at Rest of Self-Consolidating Concrete
Omran, A. R., Naji, S., & Khayat, K. H. (2011) · ACI Materials Journal · doi:10.14359/51683466 · Cited by 53
The Fabric Formwork Book: Methods for Building New Architectural and Structural Forms in Concrete
West, M. J. (2016) · Cited by 28
Cited by
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
Environmental impacts and decarbonization strategies in the cement and concrete industries
Habert, G., Miller, S. A., John, V. M., Provis, J. L., Favier, A., Horvath, A., & Scrivener, K. L. (2020) · Nature Reviews Earth & Environment · doi:10.1038/s43017-020-0093-3 · Cited by 1,572
Paolini, A., Kollmannsberger, S., & Rank, E. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100894 · Cited by 673
Wangler, T., Roussel, N., Bos, F. P., Salet, T. A. M., & Flatt, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105780 · Cited by 612
Self-citationNerella, V. N., Hempel, S., & Mechtcherine, V. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.235 · Cited by 605
Metadata
- Authors
- Roussel, N.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 112
- Pages
- 76-85
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2800610918
- Cited by
- 1,203
- References
- 19
- FWCI
- 67.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.