The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Sulfuric acid resistance of one-part alkali-activated mortars
Open accessAbstract
Abstract One-part alkali-activated (geopolymer) mortars based on three different silica-rich starting materials and sodium aluminate, with and without ground granulated blast furnace slag (GGBFS) addition, were tested regarding sulfuric acid resistance according to DIN 19573:2016-03 (70 days at pH = 1). Corresponding pastes were characterized by XRD, SEM, chemical analysis, 29Si MAS NMR and 1H-29Si CPMAS NMR after water storage and after acid exposure. The mortars exhibited a high resistance against sulfuric acid attack, with the best ones conforming to the requirements of DIN 19573:2016-03. The analytical results showed that this was due to precipitation of silica gel at the acid-mortar interface, which formed a mechanically stable layer that protected the subjacent mortar and thus inhibited further degradation. The addition of GGBFS decreased the acid resistance via formation of expansive calcium sulfate phases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Myers, R. J., Bernal, S. A., San Nicolas, R., & Provis, J. L. (2013) · Langmuir · doi:10.1021/la4000473 · Cited by 579 · cited 2×
“Further, a significant amount of unreacted GGBFS, that would be visible by its Q species at −74 ppm [34], cannot be distinguished in the spectrum of MS_6_SL; it can thus be concluded that the GGBFS has reacted virtually completely.”
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Geopolymer-zeolite composites: A review
Rożek, P., Król, M., & Mozgawa, W. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.152 · Cited by 361
Geopolymers in construction - recent developments
Nawaz, M., Heitor, A., & Sivakumar, M. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.120472 · Cited by 268
Metadata
- Authors
- Sturm, P., Gluth, G. J. G., Jäger, C., Brouwers, H. J. H., & Kühne, H.-C.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 109
- Pages
- 54-63
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2800451025
- Cited by
- 163
- References
- 2
- FWCI
- 12.57
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Sulfuric acid resistance of one-part alkali-activated mortars. https://app.cochat.ai/papers/10.1016/j.cemconres.2018.04.009
- The paper
- Sturm, P., Gluth, G. J. G., Jäger, C., Brouwers, H. J. H., & Kühne, H.-C. (2018). Sulfuric acid resistance of one-part alkali-activated mortars. Cement and Concrete Research. https://doi.org/10.1016/j.cemconres.2018.04.009
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.