The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
The influence of the filler effect on the sulfate requirement of blended cements
Open accessAbstract
Abstract In some blended cements, the optimum amount of sulfate addition differs from that observed in OPC. This study aims to understand the mechanism behind the impact of two SCMs, namely metakaolin and limestone, on the sulfate balance of blended cements. No significant impact of the aluminum content of these SCMs was observed. Instead, it is observed that the filler effect of the SCM, which accelerates the reaction of alite, is the main factor impacting the sulfate balance. As the rate of precipitation of C-S-H is increased, more sulfate is adsorbed by the C-S-H and consequently, the depletion of gypsum is reached earlier in time during the hydration process. A relationship between heat release at the onset of the aluminate peak and the gypsum content of the system was established.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Supplementary cementitious materials
Lothenbach, B., Scrivener, K., & Hooton, R. D. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.12.001 · Cited by 3,406
Self-citationA Practical Guide to Microstructural Analysis of Cementitious Materials
(2018) · CRC Press eBooks · doi:10.1201/b19074 · Cited by 2,110
Calcined clay limestone cements (LC3)
Scrivener, K., Martirena, F., Bishnoi, S., & Maity, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.017 · Cited by 1,763
Self-citationCement substitution by a combination of metakaolin and limestone
Antoni, M., Rossen, J., Martirena, F., & Scrivener, K. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.09.006 · Cited by 1,419
Self-citationUnderstanding the Filler Effect on the Nucleation and Growth of C‐S‐H
Berodier, E., & Scrivener, K. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.13177 · Cited by 882
Self-citationAvet, F., & Scrivener, K. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.016 · Cited by 864
Self-citationThe pore solution of blended cements: a review
Vollpracht, A., Lothenbach, B., Snellings, R., & Haufe, J. (2016) · Materials and Structures · doi:10.1617/s11527-015-0724-1 · Cited by 568
Interactions between alite and C3A-gypsum hydrations in model cements
Quennoz, A., & Scrivener, K. L. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.10.018 · Cited by 418
Self-citationImpacting factors and properties of limestone calcined clay cements (LC3)
Scrivener, K., Avet, F., Maraghechi, H., Zunino, F., Ston, J., Hanpongpun, W., & Favier, A. (2019) · Green Materials · doi:10.1680/jgrma.18.00029 · Cited by 354
Self-citationHydration of C3A–gypsum systems
Quennoz, A., & Scrivener, K. L. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.04.005 · Cited by 327
Self-citation
Cited by
He, H., Ren, P., Liu, J., Yuan, J., & Shen, X. (2024) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02775 · Cited by 15
Metadata
- Authors
- Zunino, F., & Scrivener, K.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 126
- Pages
- 105918
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2986432220
- Cited by
- 334
- References
- 20
- FWCI
- 14.20
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The influence of the filler effect on the sulfate requirement of blended cements. https://app.cochat.ai/papers/10.1016/j.cemconres.2019.105918
- The paper
- Zunino, F., & Scrivener, K. (2019). The influence of the filler effect on the sulfate requirement of blended cements. Cement and Concrete Research. https://doi.org/10.1016/j.cemconres.2019.105918
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.