The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Optimized design of ultra-high performance concrete (UHPC) with a high wet packing density
Abstract
Abstract This study presents an optimized design method in developing ultra-high performance concrete (UHPC) with high wet packing density, in which the multiply effects of solid and liquid phases on UHPC packing mode are considered. Specifically, a model based on D-optimal method is firstly established to assess the influence of solid granular particles and superplasticizer (SP) on the UHPC packing density. Based on the theoretical analysis, the mixture proportions can be optimized, and UHPC with high wet packing density could be produced. Then, to evaluate the reliability of the math-physical method in developing UHPC, its compressive strength and pore structure are tested. The obtained experimental results show that the designed UHPC contributes high packing density, leading to optimized pore structure and extraordinary compressive strength. The experimental verification further highlights that D-optimal method is a promising and effective approach to design UHPC, and eventually for the development of sustainable UHPC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Concrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
Composition of reactive powder concretes
Richard, P., & Cheyrezy, M. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00144-2 · Cited by 2,358
A Practical Guide to Microstructural Analysis of Cementitious Materials
(2018) · CRC Press eBooks · doi:10.1201/b19074 · Cited by 2,110
Environmental management. Life cycle assessment. Requirements and guidelines
(2015) · doi:10.3403/30152732u · Cited by 1,730
Environmental management. Life cycle assessment. Principles and framework
(2013) · doi:10.3403/30151316 · Cited by 1,401
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.002 · Cited by 1,149
Self-citationOptimization of ultra-high-performance concrete by the use of a packing model
de Larrard, F., & Sedran, T. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90022-1 · Cited by 993
The Laws of Proportioning Concrete
Fuller, W. B., & Thompson, S. E. (1907) · Transactions of the American Society of Civil Engineers · doi:10.1061/taceat.0001979 · Cited by 902
Porosity, pore size distribution and in situ strength of concrete
Kumar, R., & Bhattacharjee, B. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00942-0 · Cited by 899
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Amran, M., Huang, S.-S., Onaizi, A. M., Makul, N., Abdelgader, H. S., & Ozbakkaloglu, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129029 · Cited by 548
Metadata
- Authors
- Wang, X., Yu, R., Song, Q., Shui, Z., Liu, Z., Wu, S., & Hou, D.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 126
- Pages
- 105921
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2981852273
- Cited by
- 332
- References
- 36
- FWCI
- 17.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimized design of ultra-high performance concrete (UHPC) with a high wet packing density. https://app.cochat.ai/papers/10.1016/j.cemconres.2019.105921
- The paper
- Wang, X., Yu, R., Song, Q., Shui, Z., Liu, Z., Wu, S., & Hou, D. (2019). Optimized design of ultra-high performance concrete (UHPC) with a high wet packing density. Cement and Concrete Research. https://doi.org/10.1016/j.cemconres.2019.105921
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.