The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Elastic buckling and plastic collapse during 3D concrete printing
Open accessAbstract
This contribution studies failure by elastic buckling and plastic collapse during 3D concrete printing of wall structures. Four types of experiments were performed, which demonstrate the circumstances under which elastic buckling and plastic collapse occur, the effect of geometrical imperfections on the buckling response, the influence by the curing rate of the concrete material on the buckling stability, and the conditions leading to the successful printing of a complex, practical structure (a picnic table). The experimental results are compared to those computed by the parametric 3D printing model recently developed by Suiker (Int. J. Mech Sci, 137: 145–170, 2018), showing a very good agreement. The design formulas and design graphs deduced from the parametric model serve as a useful tool for accurately designing wall structures against failure during 3D concrete printing. Furthermore, they may be applied to optimize the process conditions during 3D printing, by providing the maximal printing velocity, the optimal geometrical characteristics, or the minimal amount of material required for adequately printing the structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Self-citation
Cited by
Mechtcherine, V., Bos, F. P., Perrot, A., da Silva, W. R. L., Nerella, V. N., Fataei, S., Wolfs, R. J. M., Sonebi, M., & Roussel, N. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106037 · Cited by 598
Self-citationTechnology readiness: A global snapshot of 3D concrete printing and the frontiers for development
Ma, G., Buswell, R., Leal da Silva, W. R., Wang, L., Xu, J., & Jones, S. Z. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106774 · Cited by 280
Metadata
- Authors
- Suiker, A. S. J., Wolfs, R. J. M., Lucas, S. M., & Salet, T. A. M.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 135
- Pages
- 106016
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W3040001828
- Cited by
- 241
- References
- 1
- FWCI
- 14.45
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Elastic buckling and plastic collapse during 3D concrete printing. https://app.cochat.ai/papers/10.1016/j.cemconres.2020.106016
- The paper
- Suiker, A. S. J., Wolfs, R. J. M., Lucas, S. M., & Salet, T. A. M. (2020). Elastic buckling and plastic collapse during 3D concrete printing. Cement and Concrete Research. https://doi.org/10.1016/j.cemconres.2020.106016
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.