The DOI matches its Crossref record; 90 of the 90 references it cites were found in a registry or an index.
A review of mechanical properties of fibre reinforced concrete at elevated temperatures
Open accessAbstract
Abstract Fibre reinforced concrete (FRC) has gained increasing interest in recent years due to its superior mechanical properties compared to normal concrete. To apply FRC in civilian and strategically important buildings and other infrastructures, fire resistance is an inevitable matter of concern. According to the existing test results, different fibre types, fibre dosages and cementitious matrix designs would affect the fire resistance of FRC. This paper presents a comprehensive review of the recent research works on the fire resistance of FRC. In particular, the temperature-dependent mechanical properties of steel fibre reinforced concrete, polypropylene fibre reinforced concrete and hybrid fibre reinforced concrete are discussed, including permeability, spalling, compressive strength, tensile strength, elastic modulus, toughness and mass loss. In addition, the currently available predicting equations for FRC residual properties are summarised and compared.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Jalal, M., Pouladkhan, A., Harandi, O. F., & Jafari, D. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.07.001 · Cited by 394
RetractedConcrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
CAMPBELL, A., & LOPES, M. (2016) · CRC Press eBooks · doi:10.1201/9781482266177-12 · Cited by 1,518
A review on basalt fibre and its composites
Fiore, V., Scalici, T., Di Bella, G., & Valenza, A. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2014.12.034 · Cited by 1,336
Characteristics of basalt fiber as a strengthening material for concrete structures
Sim, J., Park, C., & Moon, D. Y. (2005) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2005.02.002 · Cited by 1,217
Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete
Wu, Z., Shi, C., He, W., & Wu, L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.028 · Cited by 865
High-temperature behaviour of HPC with polypropylene fibres
Kalifa, P., Chéné, G., & Gallé, C. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00596-8 · Cited by 752
High-performance fiber-reinforced concrete: a review
Afroughsabet, V., Biolzi, L., & Ozbakkaloglu, T. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-9917-4 · Cited by 648
Yu, K.-Q., Yu, J.-T., Dai, J.-G., Lu, Z.-D., & Shah, S. P. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.10.040 · Cited by 625
Compressive strength of concrete at high temperatures: a reassessment
Khoury, G. A. (1992) · Magazine of Concrete Research · doi:10.1680/macr.1992.44.161.291 · Cited by 602
Strength properties of nylon- and polypropylene-fiber-reinforced concretes
Song, P. S., Hwang, S., & Sheu, B. C. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.033 · Cited by 579
Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction
Yao, W., Li, J., & Wu, K. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00913-4 · Cited by 578
Carbon fiber reinforced metal matrix composites: Fabrication processes and properties
Shirvanimoghaddam, K., Hamim, S. U., Karbalaei Akbari, M., Fakhrhoseini, S. M., Khayyam, H., Pakseresht, A. H., Ghasali, E., Zabet, M., Munir, K. S., Jia, S., et al. (2017) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.10.032 · Cited by 574
Kizilkanat, A. B., Kabay, N., Akyüncü, V., Chowdhury, S., & Akça, A. H. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.006 · Cited by 538
Limits of spalling of fire-exposed concrete
Hertz, K. D. (2003) · Fire Safety Journal · doi:10.1016/s0379-7112(02)00051-6 · Cited by 534
Poon, C.-S., Azhar, S., Anson, M., & Wong, Y.-L. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00580-4 · Cited by 521
Investigation of hydraulic activity of ground granulated blast furnace slag in concrete
Pal, S. C., Mukherjee, A., & Pathak, S. R. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00062-0 · Cited by 471
Microstructure of fire-damaged concrete. A case study
Georgali, B., & Tsakiridis, P. E. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.02.022 · Cited by 461
Chan, Y. N., Peng, G. F., & Anson, M. (1999) · Cement and Concrete Composites · doi:10.1016/s0958-9465(98)00034-1 · Cited by 458
Poon, C. S., Shui, Z. H., & Lam, L. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.02.011 · Cited by 455
Mechanical behaviour of basalt fibre reinforced concrete
Branston, J., Das, S., Kenno, S. Y., & Taylor, C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.009 · Cited by 444
Yazıcı, H., Yardımcı, M. Y., Aydın, S., & Karabulut, A. Ş. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.08.003 · Cited by 439
Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres
Sivakumar, A., & Santhanam, M. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2007.03.006 · Cited by 424
Effect of high temperatures on high performance steel fibre reinforced concrete
Lau, A., & Anson, M. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.03.024 · Cited by 403
Chen, B., & Liu, J. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.11.010 · Cited by 375
Mechanical and durability properties of waste rubber fiber concrete with and without silica fume
Gupta, T., Chaudhary, S., & Sharma, A. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.07.081 · Cited by 370
Hybrid short fiber reinforcement system in concrete: A review
Pakravan, H. R., Latifi, M., & Jamshidi, M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.059 · Cited by 366
Khaliq, W., & Kodur, V. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.012 · Cited by 354
Influence of silica fume on the tensile strength of concrete
Bhanja, S., & Sengupta, B. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.05.024 · Cited by 352
Behnood, A., & Ziari, H. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2007.06.003 · Cited by 349
Mechanical properties of high-strength concrete after fire
Li, M., Qian, C., & Sun, W. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.11.007 · Cited by 341
Chan, Y. N., Luo, X., & Sun, W. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00240-9 · Cited by 327
Effect of Temperature on Thermal Properties of High-Strength Concrete
Kodur, V. K. R., & Sultan, M. A. (2003) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2003)15:2(101 · Cited by 311
Phan, L., Lawson, J. R., & Davis, F. L. (2001) · Materials and Structures · doi:10.1007/bf02481556 · Cited by 295
Tai, Y.-S., Pan, H.-H., & Kung, Y.-N. (2011) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2011.04.008 · Cited by 292
Li, Y., Tan, K. H., & Yang, E.-H. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.11.009 · Cited by 281
Savva, A., Manita, P., & Sideris, K. K. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.02.013 · Cited by 280
Performance of metakaolin concrete at elevated temperatures
Poon, C.-S., Azhar, S., Anson, M., & Wong, Y.-L. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(01)00061-0 · Cited by 275
Influence of thermal treatment on tensile failure of basalt fibers
Militký, J., Kovačič, V., & Rubnerová, J. (2002) · Engineering Fracture Mechanics · doi:10.1016/s0013-7944(01)00119-9 · Cited by 274
Yang, S. L., Millard, S. G., Soutsos, M. N., Barnett, S. J., & Le, T. T. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.11.012 · Cited by 272
How do polypropylene fibers improve the spalling behavior of in-situ concrete?
Zeiml, M., Leithner, D., Lackner, R., & Mang, H. A. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2005.12.018 · Cited by 271
Chen, G. M., He, Y. H., Yang, H., Chen, J. F., & Guo, Y. C. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.08.012 · Cited by 270
A new perspective on nature of fire-induced spalling in concrete
Liu, J.-C., Tan, K. H., & Yao, Y. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.204 · Cited by 268
Kang, S.-T., Choi, J.-I., Koh, K.-T., Lee, K. S., & Lee, B. Y. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.02.075 · Cited by 267
Yermak, N., Pliya, P., Beaucour, A.-L., Simon, A., & Noumowé, A. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.11.120 · Cited by 266
High temperature and residual properties of reactive powder concrete – A review
Abid, M., Hou, X., Zheng, W., & Hussain, R. R. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.083 · Cited by 254
Recycled nylon fibers as cement mortar reinforcement
Spadea, S., Farina, I., Carrafiello, A., & Fraternali, F. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.075 · Cited by 253
Noumowe, A. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2005.03.007 · Cited by 250
Impact of high temperature on PFA concrete
Xu, Y., Wong, Y. L., Poon, C. S., & Anson, M. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00513-0 · Cited by 239
Zhang, Z., & Zhang, Q. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.072 · Cited by 234
Fracture and fatigue of natural fiber-reinforced cementitious composites
Savastano, H., Santos, S. F., Radonjic, M., & Soboyejo, W. O. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.02.006 · Cited by 230
High temperature behaviour of hybrid steel–PVA fibre reinforced reactive powder concrete
Sanchayan, S., & Foster, S. J. (2016) · Materials and Structures · doi:10.1617/s11527-015-0537-2 · Cited by 196
Pore pressure development in hybrid fibre-reinforced high strength concrete at elevated temperatures
Bangi, M. R., & Horiguchi, T. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.07.001 · Cited by 193
Pliya, P., Beaucour, A.-L., & Noumowé., A. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.11.064 · Cited by 190
Changes of pore structure of cement mortars due to temperature
Rostásy, F. S., Weiβ, R., & Wiedemann, G. (1980) · Cement and Concrete Research · doi:10.1016/0008-8846(80)90072-1 · Cited by 186
Nylon–MOF Composites through Postsynthetic Polymerization
Kalaj, M., Denny, M. S., Bentz, K. C., Palomba, J. M., & Cohen, S. M. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201812655 · Cited by 185
Aslani, F., & Kelin, J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.323 · Cited by 184
Luo, X., Sun, W., & Chan, S. Y. N. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00264-1 · Cited by 183
Use of glass and nylon fibers in concrete for controlling early age micro cracking in bridge decks
Khan, M., & Ali, M. M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.111 · Cited by 183
Pore pressure and explosive spalling in concrete
Phan, L. T. (2008) · Materials and Structures · doi:10.1617/s11527-008-9353-2 · Cited by 180
Spalling of High-Strength Silica Fume Concrete in Fire
(1993) · ACI Materials Journal · doi:10.14359/4015 · Cited by 180
Effects of various fibres on high-temperature spalling in high-performance concrete
Ozawa, M., & Morimoto, H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.068 · Cited by 177
Hassani Niaki, M., Fereidoon, A., & Ghorbanzadeh Ahangari, M. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.02.063 · Cited by 176
Residual mechanical properties of polypropylene fiber-reinforced concrete after heating
Eidan, J., Rasoolan, I., Rezaeian, A., & Poorveis, D. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.209 · Cited by 169
On the mixed mode I/II fracture properties of jute fiber-reinforced concrete
Razmi, A., & Mirsayar, M. M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.05.034 · Cited by 164
Ahmad, S., Rasul, M., Adekunle, S. K., Al-Dulaijan, S. U., Maslehuddin, M., & Ali, S. I. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.12.083 · Cited by 159
Ozawa, M., Parajuli, S. S., Uchida, Y., & Zhou, B. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.02.056 · Cited by 151
Bošnjak, J., Ožbolt, J., & Hahn, R. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.005 · Cited by 148
Xiong, M., & Liew, J. Y. R. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.050 · Cited by 136
Caetano, H., Ferreira, G. C. D. S., Rodrigues, J. P. C., & Pimienta, P. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.074 · Cited by 121
Monteiro, V. M. D. A., Lima, L. R., & Silva, F. D. A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.08.103 · Cited by 120
Mechanical behavior of high strength concrete reinforced with glass fiber
Hilles, M. M., & Ziara, M. M. (2019) · Engineering Science and Technology an International Journal · doi:10.1016/j.jestch.2019.01.003 · Cited by 120
Performance of thermally damaged fibre reinforced concretes
Sideris, K. K., Manita, P., & Chaniotakis, E. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.08.009 · Cited by 117
Missemer, L., Ouedraogo, E., Malécot, Y., Clergue, C., & Rogat, D. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.10.005 · Cited by 115
Elevated temperature properties of basalt microfibril filled geopolymer composites
Behera, P. K., Baheti, V., Militký, J., & Louda, P. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.152 · Cited by 112
Mo, K. H., Yap, K. K. Q., Alengaram, U. J., & Jumaat, M. Z. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.12.103 · Cited by 108
Liu, J., & Tan, K. H. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.07.015 · Cited by 108
Hossain, K. M. A., Lachemi, M., Sammour, M. M., & Sonebi, M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.03.054 · Cited by 104
Ríos, J. D., Leiva, C., Ariza, M. P., Seitl, S., & Cifuentes, H. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107582 · Cited by 98
Li, H., & Liu, G. (2016) · International Journal of Concrete Structures and Materials · doi:10.1007/s40069-016-0125-z · Cited by 96
Chen, G. M., Yang, H., Lin, C., Chen, J. F., He, Y., & Zhang, H. Z. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.10.072 · Cited by 96
Qadi, A. N. S. A., & Al-Zaidyeen, S. M. (2012) · Journal of King Saud University - Engineering Sciences · doi:10.1016/j.jksues.2012.12.002 · Cited by 94
High Temperature Mechanical Properties of High-Strength Fly Ash Concrete with and without Fibers
Khaliq, W., & Kodur, V. K. R. (2012) · ACI Materials Journal · doi:10.14359/51684164 · Cited by 88
Ali, M. H., Dinkha, Y. Z., & Haido, J. H. (2016) · Engineering Science and Technology an International Journal · doi:10.1016/j.jestch.2016.12.004 · Cited by 88
Yang, L., Qi, C., Lin, X., Li, J., & Dong, X. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2019.03.105 · Cited by 85
Self-citationKim, Y., Lee, T., & Kim, G.-Y. (2012) · Materials and Structures · doi:10.1617/s11527-012-9918-y · Cited by 66
Mahapatra, C. K., & Barai, S. V. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.155 · Cited by 64
The non-equilibrium phase diagrams of flow-induced crystallization and melting of polyethylene
Wang, Z., Ju, J., Yang, J., Ma, Z., Liu, D., Cui, K., Yang, H., Chang, J., Huang, N., & Li, L. (2016) · Scientific Reports · doi:10.1038/srep32968 · Cited by 62
Zhao, J., Zheng, J. J., Peng, G.-F., & van Breugel, K. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.023 · Cited by 59
Influence of Steel Fibers on Design Stress-Strain Curve for High-Strength Concrete
Taerwe, L. R., & Gysel, A. V. (1996) · Journal of Engineering Mechanics · doi:10.1061/(asce)0733-9399(1996)122:8(695 · Cited by 41
Cited by
Mechanical Properties of Natural as well as Synthetic Fiber Reinforced Concrete: A Review
Ahmad, J., & Zhou, Z. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.127353 · Cited by 266
Hybrid fibre reinforced concrete–A state of the art review
Vairagade, V. S., & Dhale, S. A. (2023) · Hybrid Advances · doi:10.1016/j.hybadv.2023.100035 · Cited by 90
Tayeh, B., Hadzima-Nyarko, M., Riad, M. Y. R., & Hafez, R. D. A. (2023) · Buildings · doi:10.3390/buildings13010129 · Cited by 40
Lang, W., Chen, W., Xie, Q., Wang, P., & Zhang, G. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e05156 · Cited by 2
Metadata
- Authors
- Wu, H., Lin, X., & Zhou, A.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 135
- Pages
- 106117
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W3035551840
- Cited by
- 328
- References
- 90
- FWCI
- 22.72
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.