The DOI matches its Crossref record.
Characterization of three commercial Y-TZP ceramics produced for their High-Translucency, High-Strength and High-Surface Area
Open accessAbstract
Developing yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) with high strength and translucency could significantly widen the clinical indications of monolithic zirconia restorations. This study investigates the mechanical and optical properties of three Y-TZP ceramics: High-Translucency, High-Strength and High-Surface Area. The four-point bending strengths (mean ± standard error) for the three Y-TZP ceramics (n = 10) were 990 ± 39, 1416 ± 33 and 1076 ± 32 MPa for High-Translucency, High-Strength and High-Surface Area, respectively. The fracture toughness values (mean ± standard error) for the three zirconias (n = 10) were 3.24 ± 0.10, 3.63 ± 0.12 and 3.21 ± 0.14 MPa m1/2 for High-Translucency, High-Strength and High-Surface Area, respectively. Both strength and toughness values of High-Strength zirconia were significantly higher than High-Surface Area and High-Translucency zirconias. Translucency parameter values of High-Translucency zirconia were considerably higher than High-Strength and High-Surface Area zirconias. However, all three zirconias became essentially opaque when their thickness reached 1 mm or greater. Our findings suggest that there exists a delicate balance between mechanical and optical properties of the current commercial Y-TZP ceramics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Novel Zirconia Materials in Dentistry
Zhang, Y., & Lawn, B. R. (2018) · Journal of Dental Research · doi:10.1177/0022034517737483 · Cited by 998
Self-citationComparison of the mechanical properties of translucent zirconia and lithium disilicate
Kwon, S. J., Lawson, N. C., McLaren, E. E., Nejat, A. H., & Burgess, J. O. (2018) · The Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2017.08.004 · Cited by 299
Dental Ceramics for Restoration and Metal Veneering
Zhang, Y., & Kelly, J. R. (2017) · Dental Clinics of North America · doi:10.1016/j.cden.2017.06.005 · Cited by 288
Self-citationDimitriadis, K., Sfikas, A. K., Kamnis, S., Tsolka, P., & Agathopoulos, S. (2022) · The Journal of Advanced Prosthodontics · doi:10.4047/jap.2022.14.2.96 · Cited by 25
Metadata
- Authors
- Tong, H., Tanaka, C. B., Kaizer, M. R., & Zhang, Y.
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2016-01
- Volume
- 42
- Issue
- 1
- Pages
- 1077-1085
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W1926995057
- Cited by
- 199
- References
- 0
- FWCI
- 14.13
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.