The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites
Abstract
Abstract Ceramics and ceramic reinforced metal matrix composites (MMCs) are widely used in severe working conditions and have been applied in biomedical, aerospace, electronic, and other high-end engineering industries owing to their superior properties of high wear resistance, outstanding chemical inertness, and excellent properties at elevated temperatures. These superior properties, on the other hand, make it difficult to process these materials with conventional manufacturing methods, posing problems of high cost and energy consumptions. In response to this problem, direct additive manufacturing (AM), which is equipped with a high-power-density laser beam as heat source, has been developed and extensively employed for processing ceramics and ceramic reinforced MMCs. Compared with other direct AM processes, laser deposition-additive manufacturing (LD-AM) process excels in several aspects, such as lower labor intensity, higher fabrication efficiency, and capabilities of parts remanufacturing and functionally gradient composite materials fabrication. Besides these benefits, problems of poor bonding, cracking, lowered toughness, etc. still exist in LD-AM fabricated parts. This paper reviews developments on LD-AM of ceramics and ceramic reinforced MMCs in both bulk parts fabrication and cladding. Main issues to be solved, corresponding solutions, and the trend of development are summarized and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
State of the art of zirconia for dental applications
Denry, I., & Kelly, J. R. (2008) · Dental Materials · doi:10.1016/j.dental.2007.05.007 · Cited by 2,133
Metal matrix composites – From science to technological significance
Miracle, D. B. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.05.027 · Cited by 1,921
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S. M. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.002 · Cited by 1,108
Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?
Huang, L. J., Geng, L., & Peng, H.-X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.01.002 · Cited by 788
Ning, F., Cong, W., Hu, Y., & Wang, H. (2017) · Journal of Composite Materials · doi:10.1177/0021998316646169 · Cited by 632
Self-citationAttar, H., Bönisch, M., Calin, M., Zhang, L.-C., Scudino, S., & Eckert, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.022 · Cited by 585
Ceramic and metal matrix composites: Routes and properties
Rosso, M. (2006) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.04.038 · Cited by 558
Lasers in additive manufacturing: A review
Lee, H., Lim, C. H. J., Low, M. J., Tham, N., Murukeshan, V. M., & Kim, Y.-J. (2017) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-017-0037-7 · Cited by 449
Zirconia-toughened alumina (ZTA) ceramics
Wang, J., & Stevens, R. (1989) · Journal of Materials Science · doi:10.1007/bf02385721 · Cited by 426
Additive manufacturing of ZrO2‐Al2O3 ceramic components by selective laser melting
Wilkes, J., Hagedorn, Y., Meiners, W., & Wissenbach, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311292736 · Cited by 398
Ceramic components manufacturing by selective laser sintering
Bertrand, P., Bayle, F., Combe, C., Goeuriot, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.085 · Cited by 351
Direct Inkjet Printing of Dental Prostheses Made of Zirconia
Ebert, J., Özkol, E., Zeichner, A., Uibel, K., Weiss, Ö., Koops, U., Telle, R., & Fischer, H. (2009) · Journal of Dental Research · doi:10.1177/0022034509339988 · Cited by 281
Stereolithography of structural complex ceramic parts
Chartier, T., Chaput, C., Doreau, F., & Loiseau, M. (2002) · Journal of Materials Science · doi:10.1023/a:1016102210277 · Cited by 274
Processing of Bulk Alumina Ceramics Using Laser Engineered Net Shaping
Balla, V. K., Bose, S., & Bandyopadhyay, A. (2008) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2008.02202.x · Cited by 217
Hu, Y., Cong, W., Wang, X., Li, Y., Ning, F., & Wang, H. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.09.019 · Cited by 216
Self-citationGhosh, S. K., & Saha, P. (2011) · Materials & Design · doi:10.1016/j.matdes.2010.06.020 · Cited by 190
Grinding induced damage in ceramics
Zhang, B., Zheng, X. L., TOKURA, H., & Yoshikawa, M. (2002) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(02)00952-4 · Cited by 181
Cong, W., & Ning, F. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.04.008 · Cited by 181
Self-citationCeramics as biomaterials for dental restoration
Höland, W., Schweiger, M., Watzke, R., Peschke, A., & Kappert, H. F. (2008) · Expert Review of Medical Devices · doi:10.1586/17434440.5.6.729 · Cited by 143
Li, Q., Lei, Y., & Fu, H. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.11.026 · Cited by 123
Hard coatings based on thermal spray and laser cladding
Khanna, A. S., Kumari, S., Kanungo, S., & Gasser, A. (2008) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2008.09.017 · Cited by 72
Direct laser processing of bulk lead zirconate titanate ceramics
Bernard, S. A., Balla, V. K., Bose, S., & Bandyopadhyay, A. K. (2010) · Materials Science and Engineering B · doi:10.1016/j.mseb.2010.04.022 · Cited by 55
Studies on thermoplastic 3D printing of steel–zirconia composites
Scheithauer, U., Bergner, A., Schwarzer, E., Richter, H., & Moritz, T. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.209 · Cited by 53
Al2O3-ZrO2 eutectic ceramic via ultrasonic-assisted laser engineered net shaping
Yan, S., Wu, D., Niu, F., Ma, G., & Kang, R. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.08.165 · Cited by 47
Cited by
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
Additive manufacturing of functionally graded metallic materials using laser metal deposition
Yan, L., Chen, Y., & Liou, F. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100901 · Cited by 367
Laser-based directed energy deposition (DED-LB) of advanced materials
Svetlizky, D., Zheng, B., Vyatskikh, A., Das, M., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2022) · Materials Science and Engineering: A · doi:10.1016/j.msea.2022.142967 · Cited by 331
Wei, C., & Li, L. (2021) · Virtual and Physical Prototyping · doi:10.1080/17452759.2021.1928520 · Cited by 316
A review on additive manufacturing of ceramic matrix composites
Sun, J., Ye, D., Zou, J., Chen, X., Wang, Y., Yuan, J., Liang, H., Qu, H., Binner, J., & Bai, J. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.06.039 · Cited by 265
Metadata
- Authors
- Hu, Y., & Cong, W.
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 44
- Issue
- 17
- Pages
- 20599-20612
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W2886436362
- Cited by
- 276
- References
- 27
- FWCI
- 12.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.