The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing
Abstract
Abstract Photosensitive Al2O3-resin slurries with high solid loading, low viscosity used for stereolithography based additive manufacturing were prepared in this paper. The dispersion behavior and rheological behavior of the Al2O3-resin slurries were studied by rheology observation and sedimentation tests. The dispersant type, concentration and solid loading had significant effects on the rheological behavior and stability of the photosensitive Al2O3-resin slurries. A long term stability and homogeneity slurry was obtained when the dispersant and concentration were KOS110 and 5 wt%, respectively. The Al2O3 slurry prepared with a high solid loading up to 60 vol%, low viscosity of 15.4 Pa s at 200 s−1 was chosen for stereolithography based additive manufacturing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Mechanism for Non-Newtonian Flow in Suspensions of Rigid Spheres
Krieger, I. M., & Dougherty, T. J. (1959) · Transactions of the Society of Rheology · doi:10.1122/1.548848 · Cited by 3,402
Freeform fabrication of ceramics via stereolithography
Griffith, M. L., & Halloran, J. W. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb09022.x · Cited by 815
Ceramic suspensions suitable for stereolithography
Hinczewski, C., Corbel, S., & Chartier, T. (1998) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(97)00186-6 · Cited by 351
Ruiz-Morales, J. C., Tarancón, A., Canales-Vázquez, J., Méndez-Ramos, J., Hernández-Afonso, L., Acosta-Mora, P., Marín Rueda, J. R., & Fernández-González, R. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03526d · Cited by 299
Stereolithography of structural complex ceramic parts
Chartier, T., Chaput, C., Doreau, F., & Loiseau, M. (2002) · Journal of Materials Science · doi:10.1023/a:1016102210277 · Cited by 274
Additive Manufacturing of Dense Ceramic Parts via Direct Ink Writing of Aqueous Alumina Suspensions
Rueschhoff, L., Costakis, W., Michie, M., Youngblood, J., & Trice, R. (2016) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12557 · Cited by 251
Wu, H., Cheng, Y., Liu, W., He, R., Zhou, M., Wu, S., Song, X., & Chen, Y. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.08.024 · Cited by 248
Self-citationInfluence of Resin Composition on the Defect Formation in Alumina Manufactured by Stereolithography
Johansson, E., Lidström, O., Johansson, J., Lyckfeldt, O., & Adolfsson, E. (2017) · Materials · doi:10.3390/ma10020138 · Cited by 197
The effect of the surfactants on the formulation of UV-curable SLA alumina suspension
Li, K., & Zhao, Z. (2017) · Ceramics International · doi:10.1016/j.ceramint.2016.11.143 · Cited by 195
Alumina–zirconium ceramics synthesis by selective laser sintering/melting
Shishkovsky, I., Yadroitsev, I., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.09.001 · Cited by 186
Standard Terminology for Additive Manufacturing - General Principles - Terminology
F42 Committee (2016) · doi:10.1520/f3177-15 · Cited by 180
Digital light processing of ceramic components from polysiloxanes
Schmidt, J., & Colombo, P. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.07.033 · Cited by 170
Badev, A., Abouliatim, Y., Chartier, T., Lecamp, L., Lebaudy, P., Chaput, C., & Delage, C. (2011) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2011.05.010 · Cited by 169
Fabrication and characterisation of ceramics via low-cost DLP 3D printing
Varghese, G., Moral, M., Castro‐García, M., López-López, J. J., Marín‐Rueda, J. R., Yagüe-Alcaraz, V., Hernández-Afonso, L., Ruiz-Morales, J. C., & Canales‐Vázquez, J. (2017) · Boletín de la Sociedad Española de Cerámica y Vidrio · doi:10.1016/j.bsecv.2017.09.004 · Cited by 139
Zhang, S., Sha, N., & Zhao, Z. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.12.013 · Cited by 136
The role of organic dispersants in aqueous alumina suspensions
Tomasik, P., Schilling, C. H., Jankowiak, R., & Kim, J. (2003) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(02)00204-2 · Cited by 41
Ruiz-Morales, J. C., Hernandez-Rodriguez, E., Acosta-Mora, P., Méndez‐Ramos, J., Chinea, E., Esparza, P., Canales‐Vázquez, J., & Núñez, P. (2014) · Boletín de la Sociedad Española de Cerámica y Vidrio · doi:10.3989/cyv.252014 · Cited by 32
Cited by
A comprehensive review of the photopolymerization of ceramic resins used in stereolithography
Zakeri, S., Vippola, M., & Levänen, E. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101177 · Cited by 496
Progress and challenges towards additive manufacturing of SiC ceramic
He, R., Zhou, N., Zhang, K., Zhang, X., Zhang, L., Wang, W., & Fang, D. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0484-z · Cited by 327
Self-citationCamargo, I. L. D., Morais, M. M., Fortulan, C. A., & Branciforti, M. C. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.01.031 · Cited by 263
Zhou, S., Liu, G., Wang, C., Zhang, Y., Yan, C., & Shi, Y. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112632 · Cited by 150
Xiao, C., Zheng, K., Chen, S., Li, N., Shang, X., Wang, F., Liang, J., Khan, S. B., Shen, Y., Lu, B., et al. (2023) · Additive Manufacturing · doi:10.1016/j.addma.2023.103607 · Cited by 63
Metadata
- Authors
- Zhang, K., Xie, C., Wang, G., He, R., Ding, G., Wang, M., Dai, D., & Fang, D.
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 45
- Issue
- 1
- Pages
- 203-208
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W2892208067
- Cited by
- 313
- References
- 17
- FWCI
- 12.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.