DAEM kinetics analysis and finite element simulation of thermal debinding process for a gelcast SiAlON green body
The DOI matches its Crossref record; 29 of the 31 references it cites were found in a registry or an index.
Abstract
Abstract Thermal debinding is an important step in a gelcasting process, and the proper selection of the debinding technique is crucial for the quality of a green body. In this work, the pyrolysis characteristics of an N,N-dimethylacrylamide/N,N′-methylenebisacrylamide gel system in a thermal debinding process of a gelcast SiAlON green body were investigated through nonisothermal thermogravimetric analysis and a thermogravimetric analyzer coupled with Fourier transform infrared spectroscopy analysis. In addition, the pyrolysis kinetics of the thermal debinding process of the gelcast SiAlON green body were described by using a three-parallel-distributed activation energy model. The results showed that the conversion (α) and reaction rate (dα/dT) curves predicted by the kinetic model agreed well with the experimental data. The kinetic parameters (E0,i, k0,i, and σi) of the global thermal debinding process were 116.0–158.0 kJ/mol, 9.31 × 108 s−1 and 2.19–20.52 kJ/mol, respectively. Finally, a solid–fluid–thermal–mechanical coupling numerical model of the thermal debinding process was established through finite element methods on the basis of theories of the porous medium seepage and thermodynamics. The distributions of the residual content of the gel polymer, the temperature, the pressure, and the stress in the green body throughout the entire thermal debinding process were evaluated using this model. It was shown that a high heating rate leads to a high temperature gradient and von Mises stress inside the green body. Moreover, a reasonable debinding technique was proposed to effectively prevent and eliminate defects caused by excessive stress or a temperature gradient inside the green body. In a given DMAA/MBAM gel system, the strongest stress peak can be effectively eliminated by holding at 310 °C for no less than 2 h at a heating rate of 1 °C/min. This work aims to provide a theoretical basis for studying thermal debinding kinetics and optimizing debinding techniques for the gelcasting of various materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chen, Z., Hu, M., Zhu, X., Guo, D., Liu, S., Hu, Z., Xiao, B., Wang, J., & Laghari, M. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.05.062 · Cited by 361
Gelcasting, a near net shape technique
Gilissen, R., Erauw, J., Smolders, A., Vanswijgenhoven, E. L., & Luyten, J. (2000) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(99)00075-8 · Cited by 208
Colloidal processing: enabling complex shaped ceramics with unique multiscale structures
Franks, G. V., Tallon, C., Studart, A. R., Sesso, M. L., & Leo, S. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14705 · Cited by 167
Protein forming — a novel shaping technique for ceramics
Lyckfeldt, O., Brandt, J., & Lesca, S. (2000) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(00)00136-9 · Cited by 139
Review and evaluation of the approximations to the temperature integral
Órfão, J. J. M. (2007) · AIChE Journal · doi:10.1002/aic.11296 · Cited by 117
Wang, J., Lian, W., Li, P., Zhang, Z., Yang, J., Hao, X., Huang, W., & Guan, G. (2017) · Fuel · doi:10.1016/j.fuel.2017.06.078 · Cited by 107
Alumina gelcasting by using HEMA system
Cai, K., Huang, Y. H., & Yang, J. (2004) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2004.04.024 · Cited by 105
Lin, Y., Chen, Z., Dai, M., Fang, S., Liao, Y., Yu, Z., & Ma, X. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.03.036 · Cited by 101
Pyrolysis behaviors of oilfield sludge based on Py-GC/MS and DAEM kinetics analysis
Ma, Z., Xie, J., Gao, N., & Quan, C. (2018) · Journal of the Energy Institute · doi:10.1016/j.joei.2018.07.001 · Cited by 92
New gel-casting process for alumina ceramics based on gelation of alginate
Yu, J., Kanno, Y., & Xie, Z. (2002) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(01)00513-1 · Cited by 87
Effect of Sintering Temperature on the Properties of Fused Silica Ceramics Prepared by Gelcasting
Wan, W., Huang, C., Yang, J. H., Zeng, J., & Qiu, T. (2014) · Journal of Electronic Materials · doi:10.1007/s11664-014-3112-7 · Cited by 74
Properties of silicon carbide ceramics from gelcasting and pressureless sintering
Zhang, J., Jiang, D., Lin, Q., Chen, Z., & Huang, Z. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.08.034 · Cited by 70
Sensitivity analysis of three-parallel-DAEM-reaction model for describing rice straw pyrolysis
Cai, J., Wu, W., & Liu, R. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.12.073 · Cited by 68
The preparation of silicon nitride ceramics by gelcasting and pressureless sintering
Zeng, W., Gan, X., Li, Z., & Zhou, K. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.04.040 · Cited by 43
Mamen, B., Barrière, T., & Gélin, J.-C. (2012) · Powder Technology · doi:10.1016/j.powtec.2012.10.006 · Cited by 40
Isobam assisted slurry optimization and gelcasting of transparent YAG ceramics
Yao, Q. X., Zhang, L., Jiang, Z., Huang, G., Zhou, T., Ben, Y., Wei, S., Sun, R., Chen, H., & Wang, Y. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.10.098 · Cited by 38
Rheology of Cross‐Linked Chitosan–Alumina Suspensions Used for a New Gelcasting Process
Johnson, S. B., Dunstan, D. E., & Franks, G. V. (2002) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2002.tb00338.x · Cited by 37
A Synergistic Low‐Toxicity Gelcasting System by Using HEMA and PVP
Cai, K., Huang, Y. H., & Yang, J. (2005) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2005.00602.x · Cited by 36
A novel casting forming for ceramics by gelatine and enzyme catalysis
Xie, Z., Chen, Y., & Huang, Y. (2000) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(99)00089-8 · Cited by 31
Sahli, M., Lebied, A., Gélin, J.-C., Barrière, T., & Necib, B. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-6983-8 · Cited by 30
Effect of thermal oxidation treatment in air on the hydrolysis of AlN powder
Li, Y. Q., Qiu, T., & Xu, J. (1997) · Materials Research Bulletin · doi:10.1016/s0025-5408(97)00093-7 · Cited by 29
Yin, S., Pan, L., Guo, L., Liu, Y., Feng, Y., Qiu, T., & Yang, J. H. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.01.165 · Cited by 28
Pietrzak, E., Wiecińska, P., & Szafran, M. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.05.166 · Cited by 27
Near‐Net Shape β‐Si 4 Al 2 O 2 N 6 Parts by Hydrolysis Induced Aqueous Gelcasting Process
Ganesh, I. (2008) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2008.02258.x · Cited by 26
Non-isothermal kinetic study of the thermal decomposition of diaminoglyoxime and diaminofurazan
Kohsari, I., Pourmortazavi, S. M., & Mirsadeghi, S. (2006) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-006-7551-0 · Cited by 24
Deng, T., Wang, Y., Dufresne, A., & Lin, N. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.058 · Cited by 21
Non-aqueous gelcasting of AlN ceramics using a low-toxicity monomer (DMAA) as gelling agent
Guo, L., Yang, J. H., Feng, Y., & Qiu, T. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.10.083 · Cited by 19
Netshape centrifugal gel-casting of high-temperature sialon ceramics
Jamshidi, P., Lu, N., Liu, G., Herny, E., & Attallah, M. M. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.11.143 · Cited by 7
Moldelling removal of polymer in PIM
Li, X. (2000) · The Chinese Journal of Nonferrous Metals · Cited by 1
Research works printed but not linked: 3
- Zhang, 2008, Debinding of gelcasting Al2O3 green body, Rare Met. Mater. Eng., 37, 697
- Huang, 2007, Research progress of new colloidal forming processes for advanced ceramics, J. Chin. Ceram. Soc., 35, 129
- Liu, 2000, Study on gasification kinetics of DATONG coal and its chars, J. Fuel Chem. Technol., 28, 289
Cited by
Wang, Z., Zhang, Y.-Z., Miao, W., Wu, F.-B., Wang, S., Ouyang, J., Wang, Y., & Zou, Y.-C. (2025) · Materials · doi:10.3390/ma18071556 · Cited by 30
“The conversion α under different heating rates and reaction rates d α /d T predicted by the model aligned well with experimental results, as illustrated in Figure 10a,b [122].”
InfluentialZhao, K., Ye, Z., Su, Z., Cao, W., Shi, D., Hao, X., Zhang, S., Wang, Z., Xu, X., & Zhu, J. (2025) · Additive manufacturing · doi:10.1016/j.addma.2025.104793 · Cited by 36
Thermal Characteristics and Kinetics of Waste Camellia oleifera Shells by TG–GC/MS
Yang, Z., Fu, L., & Fan, F. (2019) · ACS Omega · doi:10.1021/acsomega.9b01013 · Cited by 18
Li, J., Huang, J., & Yin, R. (2019) · RSC Advances · doi:10.1039/c9ra04489b · Cited by 15
Self-citationCui, M., Wang, T., Zhao, Y., Zhang, Z., Wang, X., Hou, X., Sun, W., & Liu, H. (2023) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.14480 · Cited by 11
Metadata
- Authors
- Li, J., Zhang, C., Yin, R., & Zhang, W.
- Affiliations
- Central South University (CN)
- Hunan University of Technology (CN)
- Corresponding author
- Li, Jing
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 45
- Issue
- 7
- Pages
- 8166-8174
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W2909721740
- Cited by
- 17
- References
- 31
- Citations by year
- 2026: 6 · 2025: 4 · 2024: 1 · 2023: 1 · 2022: 1 · 2021: 1 · 2019: 3
- FWCI
- 0.74
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- Locations
- Ceramics International (publishedVersion)
- Funders
- National Natural Science Foundation of China (51574120)
- Topics
- Physical Sciences › Materials Science › Ceramics and Composites › Advanced ceramic materials synthesis
- Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
- Physical Sciences › Engineering › Computational Mechanics › Heat and Mass Transfer in Porous Media
- Keywords
- thermal debinding, sialon, gel casting, green body, pyrolysis kinetics, N,N-dimethylacrylamide, N,N'-methylenebisacrylamide, von Mises stress, temperature gradient, heating rate
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.