The DOI matches its Crossref record.
Additive manufacturing of hydroxyapatite bone scaffolds via digital light processing and in vitro compatibility
Open accessAbstract
The bioceramic material hydroxyapatite (HA) is widely used in the field of bone repair. Based on additive manufacturing (AM) techniques, HA is fabricated with complex geometry to satisfy biomedical application requirements. Digital light processing (DLP) is a promising AM technique that is capable of producing HA parts with high accuracy and efficiency. The fabrication of HA parts using DLP is investigated in this study. Properties of the HA ceramic slurry and the process parameters of curing, debinding, and sintering are initially examined. The mechanical properties, porosity, and shrinkage of the sintered samples is then investigated. The experimental results show that ceramic samples with density above 90%, microhardness up to 270 HV, and flexural strength of 41.3 MPa can be manufactured using the DLP method. Hydroxyapatite bone scaffolds are then prepared with pore sizes of 300–600 μm, porosity of about 49.8%, and compressive strength of 15.25 MPa, and the scaffolds are cultured with osteoblast precursor cells to detect biocompatibility. Results illustrate that the produced scaffolds possess strong biocompatibility and can promote osteoblast proliferation, adhesion, and differentiation. The HA bone scaffolds fabricated by DLP AM show strong potential to fulfill a constructive role in the medical field of human bone repair.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A comprehensive review of the photopolymerization of ceramic resins used in stereolithography
Zakeri, S., Vippola, M., & Levänen, E. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101177 · Cited by 496
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 450
Mg bone implant: Features, developments and perspectives
Yang, Y., He, C., Dianyu, E., Yang, W., Qi, F., Xie, D., Shen, L., Peng, S., & Shuai, C. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108259 · Cited by 433
Self-citationVat photopolymerization of polymers and polymer composites: Processes and applications
Al Rashid, A., Ahmed, W., Khalid, M. Y., & Koç, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102279 · Cited by 326
A review of 3D printed porous ceramics
Zhang, F., Li, Z., Xu, M., Wang, S., Li, N., & Yang, J. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.02.039 · Cited by 284
Metadata
- Authors
- Liu, Z., Liang, H., Shi, T., Xie, D., Chen, R., Han, X., Shen, L., Wang, C., & Tian, Z.
- Venue
- Ceramics International
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 45
- Issue
- 8
- Pages
- 11079-11086
- ISSN
- 0272-8842 (ISSN-L)
- OpenAlex
- W2922329776
- Cited by
- 165
- References
- 0
- FWCI
- 7.13
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Additive manufacturing of hydroxyapatite bone scaffolds via digital light processing and in vitro compatibility. https://app.cochat.ai/papers/10.1016/j.ceramint.2019.02.195
- The paper
- Liu, Z., Liang, H., Shi, T., Xie, D., Chen, R., Han, X., Shen, L., Wang, C., & Tian, Z. (2019). Additive manufacturing of hydroxyapatite bone scaffolds via digital light processing and in vitro compatibility. Ceramics International. https://doi.org/10.1016/j.ceramint.2019.02.195
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.