The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A bubble-based EMMS model for gas–solid bubbling fluidization
Open accessAbstract
An EMMS/bubbling model for gas-solid bubbling fluidized bed was proposed based on the energy-minimization multi-scale (EMMS) method (Li and Kwauk, 1994). In this new model, the meso-scale structure was characterized with bubbles in place of clusters of the original EMMS method. Accordingly, the bubbling fluidized bed was resolved into the suspending and the energy-dissipation sub-systems over three sub-phases, i.e., the emulsion phase, the bubble phase and their inter-phase in-between. A stability condition of minimization of the energy consumption for suspending particles (N(5)-> min) was proposed, to close the hydrodynamic equations on these sub-phases. This bubble-based EMMS model has been validated and found in agreement with experimental data available in literature. Further, the unsteady-state version of the model was used to calculate the drag coefficient for two-fluid model (TFM). It was found that TFM simulation with EMMS/bubbling drag coefficient allows using coarser grid than that with homogeneous drag coefficient, resulting in both good predictability and scalability. (C) 2011 Elsevier Ltd. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geldart, D. (1973) · Powder Technology · doi:10.1016/0032-5910(73)80037-3 · Cited by 3,481
Drag coefficient and relative velocity in bubbly, droplet or particulate flows
Ishii, M., & Zuber, N. (1979) · AIChE Journal · doi:10.1002/aic.690250513 · Cited by 2,031
Cited by
Continuum theory for dense gas-solid flow: A state-of-the-art review
Wang, J. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2019.115428 · Cited by 368
Progress in CFD Simulations of Fluidized Beds for Chemical and Energy Process Engineering
Alobaid, F., Almohammed, N., Massoudi Farid, M., May, J., Rößger, P., Richter, A., & Epple, B. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100930 · Cited by 266
Metadata
- Authors
- Shi, Z., Wang, W., & Li, J.
- Venue
- Chemical Engineering Science
- Publisher
- Elsevier BV
- Published
- 2011-11
- Volume
- 66
- Issue
- 22
- Pages
- 5541-5555
- ISSN
- 0009-2509 (ISSN-L)
- OpenAlex
- W2026306082
- Cited by
- 193
- References
- 2
- FWCI
- 7.42
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.