Distribution coefficient of selenium in Japanese agricultural soils
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
In order to evaluate the selenium (Se) sorption level in Japanese soils, soil/soil solution distribution coefficients (K(d)s) were obtained for 58 agricultural soil samples (seven soil classification groups) using 75Se as a tracer. Although several chemical forms of Se are present in agricultural fields, selenite was used, because it is the major inorganic Se form in acid soils such as found in Japan. The Kd values obtained covered a wide range, from 12 to 1060l/kg, and their arithmetic mean was 315l/kg. Among the soil groups, Andosols had higher Kd values. The Kd values for all samples were highly correlated with soil active-aluminum (Al) and active-iron (Fe) contents. Thus, active-Al and active-Fe were considered to be the major adsorbents of Se. Then, a new sequential extraction procedure was applied to 12 soil samples in order to quantify the effect of soil components on Se adsorption. The sequential extraction results showed that 80-100% of the adsorbed Se was recovered as Al-bound Se and Fe-bound Se. The amount of Al-bound Se was the highest in the soils that showed high Kd values, though the relative contribution of Fe-bound Se tended to increase with decreasing Kd values. The high values of Kd seemed to be caused mainly by the adsorption of Se onto active-Al in Japanese soils.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Accumulation and volatilization of different chemical species of selenium by plants
Zayed, A., Lytle, C. M., & Terry, N. (1998) · Planta · doi:10.1007/s004250050402 · Cited by 434
Selenate and Selenite Sorption on Iron Oxides An Infrared and Electrophoretic Study
Su, C., & Suarez, D. L. (2000) · Soil Science Society of America Journal · doi:10.2136/sssaj2000.641101x · Cited by 261 · cited 1×
“Both active-Al and active-Fe are regarded as reactive components for adsorption of Se (John et al., 1975; Rajan and Watkinson, 1976; Parfitt, 1978; Rajan, 1979; Balistrieri and Chao, 1987; Su and Suarez, 2000).”
Background
Cited by
Is there a future for sequential chemical extraction?
Bacon, J. R., & Davidson, C. M. (2008) · The Analyst · doi:10.1039/b711896a · Cited by 649
Rao, C. R. M., Sahuquillo, A., & Lopez Sanchez, J. F. (2008) · Water, Air, and Soil Pollution · doi:10.1007/s11270-007-9564-0 · Cited by 538
Selenium environmental cycling and bioavailability: A structural chemist point of view
Fernández-Martínez, A., & Charlet, L. (2009) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-009-9145-3 · Cited by 487
Selenium: environmental significance, pollution, and biological treatment technologies
Tan, L. C., Nancharaiah, Y. V., van Hullebusch, E. D., & Lens, P. N. L. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.05.005 · Cited by 469
Speciation and bioavailability of selenium and antimony in non-flooded and wetland soils: A review
Nakamaru, Y. M., & Altansuvd, J. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2014.04.024 · Cited by 169
Self-citation
Metadata
- Authors
- Nakamaru, Y., Tagami, K., & Uchida, S.
- Venue
- Chemosphere
- Publisher
- Elsevier BV
- Published
- 2005-03
- Volume
- 58
- Issue
- 10
- Pages
- 1347-1354
- ISSN
- 0045-6535 (ISSN-L)
- OpenAlex
- W2051382298
- Cited by
- 102
- References
- 2
- FWCI
- 4.60
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.