The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Carbon composite lignin-based adsorbents for the adsorption of dyes
Abstract
Carbon composite lignin-based adsorbent were prepared through hydrothermal method with glucose as carbon source, calcium lignosulfonate and triethylene tetramine as raw materials, respectively. The optimum synthesis conditions were determined by investigating the addition of carbon and triethylene tetramine. The adsorbent was used for the adsorption of azo dyes Congo red and Eriochrome blue black R, and the five factors affecting the adsorption were discussed, including pH of dyes, initial concentration, adsorption time, adsorption temperature and adsorbent dosage. The corresponding adsorption mechanism such as pseudo first order kinetics, pseudo second order kinetics, intraparticle diffusion, Langmuir adsorption isotherm, Freundlich isotherm, Temkin isotherm, Dubinin-Radushkevich adsorption isotherm, thermodynamics were also studied. When the dye concentration is 40 mg L-1, Congo red and Eriochrome blue black R dye removal rates reach 99%. Moreover, the adsorption process of two kinds of dyes follow the pseudo second order kinetics and the Langmuir adsorption isotherm.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dye and its removal from aqueous solution by adsorption: A review
Yagub, M. T., Sen, T. K., Afroze, S., & Ang, H. M. (2014) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2014.04.002 · Cited by 4,357
The production of carbon materials by hydrothermal carbonization of cellulose
Sevilla, M., & Fuertes, A. B. (2009) · Carbon · doi:10.1016/j.carbon.2009.04.026 · Cited by 2,021
Cationic and anionic dye adsorption by agricultural solid wastes: A comprehensive review
Salleh, M. A. M., Mahmoud, D. K., Karim, W. A. W. A., & Idris, A. (2011) · Desalination · doi:10.1016/j.desal.2011.07.019 · Cited by 1,916
Engineering carbon materials from the hydrothermal carbonization process of biomass
Hu, B., Wang, K., Wu, L., Yu, S., Antonietti, M., & Titirici, M. (2010) · Advanced Materials · doi:10.1002/adma.200902812 · Cited by 1,765
Dye removal from aqueous solution by adsorption on treated sawdust
Garg, V. K., Gupta, R., Bala Yadav, A., & Kumar, R. (2003) · Bioresource Technology · doi:10.1016/s0960-8524(03)00058-0 · Cited by 858
Adsorption of hazardous dye crystal violet from wastewater by waste materials
Mittal, A., Mittal, J., Malviya, A., Kaur, D., & Gupta, V. K. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.11.060 · Cited by 803
Inyinbor, A. A., Adekola, F. A., & Olatunji, G. A. (2016) · Water Resources and Industry · doi:10.1016/j.wri.2016.06.001 · Cited by 639
Equilibrium Studies for Acid Dye Adsorption onto Chitosan
Wong, Y. C., Szeto, Y. S., Cheung, W. H., & McKay, G. (2003) · Langmuir · doi:10.1021/la030064y · Cited by 388
Dye Adsorption on Layered Graphite Oxide
Bradder, P., Ling, S. K., Wang, S., & Liu, S. (2011) · Journal of Chemical & Engineering Data · doi:10.1021/je101049g · Cited by 381
Kinetic and adsorption study of acid dye removal using activated carbon
Gómez, V., Larrechi, M. S., & Callao, M. P. (2007) · Chemosphere · doi:10.1016/j.chemosphere.2007.03.076 · Cited by 371
Adsorption kinetics and thermodynamics of azo-dye Orange II onto highly porous titania aerogel
Abramian, L., & El-Rassy, H. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.01.019 · Cited by 332
Adsorption of a hazardous dye, erythrosine, over hen feathers
Gupta, V. K., Mittal, A., Kurup, L., & Mittal, J. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.08.032 · Cited by 331
Özcan, A., Ömeroğlu, Ç., Erdoğan, Y., & Özcan, A. S. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.138 · Cited by 316
Adsorption of a cationic dye (methylene blue) onto spent activated clay
Weng, C.-H., & Pan, Y.-F. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.09.097 · Cited by 301
Dye adsorption behavior of Luffa cylindrica fibers
Demir, H., Top, A., Balköse, D., & Ülkü, S. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.08.070 · Cited by 297
Chiou, M.-S., & Chuang, G.-S. (2006) · Chemosphere · doi:10.1016/j.chemosphere.2005.04.068 · Cited by 280
Effect of chemical modification on dye adsorption capacity of peanut hull
GONG, R., SUN, Y., CHEN, J., LIU, H., & YANG, C. (2005) · Dyes and Pigments · doi:10.1016/j.dyepig.2004.12.003 · Cited by 275
Silva, T. L., Ronix, A., Pezoti, O., Souza, L. S., Leandro, P. K. T., Bedin, K. C., Beltrame, K. K., Cazetta, A. L., & Almeida, V. C. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.06.009 · Cited by 267
Adsorption Study for Removal of Basic Red Dye Using Bentonite
Hu, Q. H., Qiao, S. Z., Haghseresht, F., Wilson, M. A., & Lu, G. Q. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050889y · Cited by 262
Adsorption of basic dyes onto montmorillonite
Wang, C.-C., Juang, L.-C., Hsu, T.-C., Lee, C.-K., Lee, J.-F., & Huang, F.-C. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2003.12.028 · Cited by 261
Lata, H., Garg, V. K., & Gupta, R. K. (2007) · Dyes and Pigments · doi:10.1016/j.dyepig.2006.04.007 · Cited by 233
Adsorption of Direct Dye on Palm Ash: Kinetic and Equilibrium Modeling
Ahmad, A. A., Hameed, B. H., & Aziz, N. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.094 · Cited by 220
Monte Blanco, S. P. D., Scheufele, F. B., Módenes, A. N., Espinoza-Quiñones, F. R., Marin, P., Kroumov, A. D., & Borba, C. E. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.08.104 · Cited by 217
Adsorption of reactive dyes from aqueous solution by dirty bentonite
Chinoune, K., Bentaleb, K., Bouberka, Z., Nadim, A., & Maschke, U. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.01.006 · Cited by 216
Adsorption study for the removal of a basic dye: experimental and modeling
Chakraborty, S., De, S., DasGupta, S., & Basu, J. K. (2005) · Chemosphere · doi:10.1016/j.chemosphere.2004.09.066 · Cited by 195
Matsushita, Y., & Yasuda, S. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.05.023 · Cited by 159
Ultrasound assisted mixed azo dye adsorption by chitosan–graphene oxide nanocomposite
Banerjee, P., Barman, S. R., Mukhopadhayay, A., & Das, P. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2016.10.009 · Cited by 128
Fechler, N., Wohlgemuth, S.-A., Jäker, P., & Antonietti, M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10674h · Cited by 126
Chen, Z., Ma, L., Li, S., Geng, J., Song, Q., Liu, J., Wang, C., Wang, H., Li, J., Qin, Z., et al. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2011.05.048 · Cited by 121
Ouyang, X., Qiu, X., Lou, H., & Yang, D. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0513189 · Cited by 119
Ming, J., Wu, Y., Liang, G., Park, J., Zhao, F., & Sun, Y. (2013) · Green Chemistry · doi:10.1039/c3gc40480c · Cited by 85
Babalola, J. O., Koiki, B. A., Eniayewu, Y., Salimonu, A., Olowoyo, J. O., Oninla, V. O., Alabi, H. A., Ofomaja, A. E., & Omorogie, M. O. (2016) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2016.07.027 · Cited by 79
Multi-shelled MgCo 2 O 4 hollow microspheres as anodes for lithium ion batteries
Shin, H., & Lee, W.-J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03959f · Cited by 63
Li, S., Jia, Z., Li, Z., Li, Y., & Zhu, R. (2016) · Advanced Powder Technology · doi:10.1016/j.apt.2016.01.024 · Cited by 49
Xiao, P., Zhao, L., Sui, Z., Xu, M., & Han, B. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.07.001 · Cited by 43
Lignin dynamics in secondary pasture soils of the South African Highveld
Kösters, R., du Preez, C. C., & Amelung, W. (2018) · Geoderma · doi:10.1016/j.geoderma.2017.12.028 · Cited by 20
Cited by
Adsorption isotherm models: A comprehensive and systematic review (2010−2020)
Mozaffari Majd, M., Kordzadeh-Kermani, V., Ghalandari, V., Askari, A., & Sillanpää, M. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.151334 · Cited by 728
Review on recent progress in chitosan-based hydrogels for wastewater treatment application
Mohammadzadeh Pakdel, P., & Peighambardoust, S. J. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.08.070 · Cited by 578
Marimuthu, S., Antonisamy, A. J., Malayandi, S., Rajendran, K., Tsai, P.-C., Pugazhendhi, A., & Ponnusamy, V. K. (2020) · Journal of Photochemistry and Photobiology B: Biology · doi:10.1016/j.jphotobiol.2020.111823 · Cited by 429
Sun, Y., Wang, T., Sun, X., Bai, L., Han, C., & Zhang, P. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113473 · Cited by 97
Akhtar, M., Sarfraz, M., Ahmad, M., Raza, N., & Zhang, L. (2025) · Desalination and Water Treatment · doi:10.1016/j.dwt.2024.100914 · Cited by 94
Metadata
- Authors
- Wang, X., Jiang, C., Hou, B., Wang, Y., Hao, C., & Wu, J.
- Venue
- Chemosphere
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 206
- Pages
- 587-596
- ISSN
- 0045-6535 (ISSN-L)
- OpenAlex
- W2800528518
- Cited by
- 390
- References
- 36
- FWCI
- 18.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.