The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Effects of pyrolysis temperature on the physicochemical properties of alfalfa-derived biochar for the adsorption of bisphenol A and sulfamethoxazole in water
Abstract
The present study reports alfalfa (one of most abundant hays in U.S)-derived biochar for effective removal of emerging contaminants in water for the first time. The physicochemical properties of alfalfa-derived biochar (AF-BC) made at various pyrolysis temperatures were investigated, and correlated with the adsorption of bisphenol A (BPA) and sulfamethoxazole (SMX) in water. The increase in pyrolysis temperatures from 350 °C to 650 °C for the pyrolysis of AF led to a drastic increase in surface area and carbonization with the loss of functional groups. The AF-derived biochar made at 650 °C showed much higher adsorption capacities for BPA and SMX than those made at 350-550 °C, mainly owing to the hydrophobic and π-π interactions supported by its high surface area and degree of carbonization. The adsorption isotherms fitted the Freundlich for BPA and Temkin models for SMX well, respectively. The adsorption capacities of AF 650 for BPA and SMX were higher than those of other biochars but lower than those of commercial activated carbon. The pH-dependent desorption for AF 650 showed high efficiency for SMX, but low efficiency for BPA indicating needs for alternative regeneration methods for BPA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dien, B. S., Jung, H.-J. G., Vogel, K. P., Casler, M. D., Lamb, J. F. S., Iten, L., Mitchell, R. B., & Sarath, G. (2006) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2006.02.004 · Cited by 491
Chemical Composition of Bio-oils Produced by Fast Pyrolysis of Two Energy Crops
Mullen, C. A., & Boateng, A. A. (2008) · Energy & Fuels · doi:10.1021/ef700776w · Cited by 369
Kim, P., Johnson, A., Edmunds, C. W., Radosevich, M., Vogt, F., Rials, T. G., & Labbé, N. (2011) · Energy & Fuels · doi:10.1021/ef200915s · Cited by 293
Kim, J. R., & Kan, E. (2016) · Journal of Environmental Management · doi:10.1016/j.jenvman.2016.05.016 · Cited by 286
Self-citationPhysicochemical and sorptive properties of biochars derived from woody and herbaceous biomass
Wang, S., Gao, B., Zimmerman, A. R., Li, Y., Ma, L., Harris, W. G., & Migliaccio, K. W. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2015.04.062 · Cited by 275
Cited by
Review of organic and inorganic pollutants removal by biochar and biochar-based composites
Liang, L., Xi, F., Tan, W., Meng, X., Hu, B., & Wang, X. (2021) · Biochar · doi:10.1007/s42773-021-00101-6 · Cited by 662
Nitrogen containing functional groups of biochar: An overview
Leng, L., Xu, S., Liu, R., Yu, T., Zhuo, X., Leng, S., Xiong, Q., & Huang, H. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2019.122286 · Cited by 532
Wang, J., Sun, C., Huang, Q.-X., Chi, Y., & Yan, J.-H. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.126486 · Cited by 539
Osman, A. I., Fawzy, S., Farghali, M., El-Azazy, M., Elgarahy, A. M., Fahim, R. A., Maksoud, M. I. A. A., Ajlan, A. A., Yousry, M., Saleem, Y., et al. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01424-x · Cited by 515
Prasannamedha, G., Kumar, P. S., Mehala, R., Sharumitha, T. J., & Surendhar, D. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.124825 · Cited by 324
Metadata
- Authors
- Choi, Y.-K., & Kan, E.
- Venue
- Chemosphere
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 218
- Pages
- 741-748
- ISSN
- 0045-6535 (ISSN-L)
- OpenAlex
- W2901174254
- Cited by
- 194
- References
- 5
- FWCI
- 7.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.