Cited by 293Thermochemical Biomass Conversion ProcessesSoil Carbon and Nitrogen DynamicsAdsorption and biosorption for pollutant removal

Surface Functionality and Carbon Structures in Lignocellulosic-Derived Biochars Produced by Fast Pyrolysis

Kim, Pyoungchung, Johnson, Amy, Edmunds, Charles W., Radosevich, Mark, Vogt, Frank, Rials, Timothy G., Labbé, Nicole·2011·Energy & Fuels

Abstract

Switchgrass- and pine wood-derived biochars produced by fast pyrolysis were characterized to estimate the degree of thermochemical transformation and to assess their potential use as a soil amendment and to sequester carbon. The feedstocks were pyrolyzed to biochars in an auger reactor at 450, 600, and 800 °C with a residence time of 30 s. Ash contents of switchgrass and pine wood biochars varied from 13 to 22% and from 1.3 to 5.2%, respectively. Nutrients, such as N, P, K, S, Mg, and Ca, in switchgrass biochars ranged from 0.16 to 1.77%. Under combustion conditions, switchgrass chars were decomposed at lower temperatures than pine wood biochars because of the structural differences between the two feedstocks. Principal component analysis of the Fourier transform infrared (FTIR) spectra allowed for the discrimination of all biochars by significant contributions of cellulose-derived functionality at low pyrolysis temperatures, while the same analysis of the Raman spectra presented apparent separation of all biochars by two broad bands at 1587 and 1350 cm –1 . These two broad peaks were deconvoluted into pseudo-subpeaks, which revealed that the number of aromatic rings linearly increased with the pyrolysis temperature. Cross-linkages between aromatic rings were also found to increase with thermal treatment, and switchgrass biochars contained a higher number of aromatic rings and cross-linkages than pine wood biochars, which was consistent with turbostratic carbon crystallites i…

Integrity signals

Registry

Crossref · 10.1021/ef200915s

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • XRD spectra of bio-char show a broad peak at 2θ around 20-30, indicating a graphitic structure developed by formation and successive ordering of aromatic carbon.

    “The XRD spectra of bio-char (Fig.5) show a broad peak at the 2θ values of around 20-30 indicating the presence of graphitic structure developed due to formation and successive ordering of aromatic carbon in the bio-char [21].”

Cites

Flagged first, then by citations

Cited by

Sorted by citations

Authors
Kim, P., Johnson, A., Edmunds, C. W., Radosevich, M., Vogt, F., Rials, T. G., & Labbé, N.
Affiliations
University of Tennessee at Knoxville (US)
Corresponding author
Labbé, Nicole
Venue
Energy & Fuels
Published
2011-09-28
Volume
25
Issue
10
Pages
4693-4703
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2042539856
Cited by
293
References
1
Citations by year
2026: 17 · 2025: 29 · 2024: 24 · 2023: 23 · 2022: 22 · 2021: 28 · 2020: 27 · 2019: 27 · 2018: 14 · 2017: 23 · 2016: 20 · 2015: 10 · 2014: 15 · 2013: 10 · 2012: 4
FWCI
5.49
Type
journal article
Language
en
Open access
closed
Locations
Energy & Fuels (publishedVersion)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Thermochemical Biomass Conversion Processes
  • Life Sciences › Agricultural and Biological Sciences › Soil Science › Soil Carbon and Nitrogen Dynamics
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
Keywords
biochar, fast pyrolysis, switchgrass, pine forest, lignocellulosic biomass, surface functionality, carbon structure, ash content, nutrient content, turbostratic carbon, carbon sequestration, soil amendment, pyrolysis temperature

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review