The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Aqueous Cr(VI) removal by a novel ball milled Fe0-biochar composite: Role of biochar electron transfer capacity under high pyrolysis temperature
Abstract
A novel ball milled Fe0-biochar composite was synthesized by ball milling the mixture of biochar (pyrolyzed at 300 °C, 500 °C, and 700 °C) and micron grade iron powder. FTIR, SEM, TEM-EDS, XRD, and XPS were applied to characterize this composite. XRD results showed that iron carbide phase was formed during the ball milling process. The ability of this synthesized composited to remove aqueous Cr(VI) was tested. Removal rates of Cr(VI) (49.6%, 65.8%, and 97.8%, respectively) by ball milled Fe0-biochar composite consisting of biochar pyrolyzed at 300 °C (300BMFe0-BC), 500 °C (500BMFe0-BC), and 700 °C (700BMFe0-BC) were much higher than those (19%, 11%, and 4%, respectively) by pristine biochar pyrolyzed at 300 °C (300BC), 500 °C (500BC), and 700 °C (700BC). Cr(VI) removal rate by 700BMFe0-BC increased from 15.4% to 97.8% when prolonging ball milling time from 6 h to 48 h. Ball milling promoted the combination of Fe0 and biochar as well as reduced the hydrodynamic diameter of the composite. Acidic conditions favored Cr(VI) removal. Ball milling exposed the functional groups of biochar and improved its Cr(VI) removal rate. Raman spectra showed that the degree of graphitization in 700 °C ball milled biochar (700BMBC) was the highest. Electrochemical analysis demonstrated that 700BMBC had the highest electron transfer capacity. In the presence of Fe0, graphitized structure in 700BMBC acted as an electron conductor, facilitating electron transfer from Fe0 to Cr(VI). Ball milling also destroyed the surface iron oxide layer to regenerate the composite.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Activated carbons and low cost adsorbents for remediation of tri- and hexavalent chromium from water
Mohan, D., & Pittman Jr., C. U. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.060 · Cited by 1,855
Zhu, S., Huang, X., Ma, F., Wang, L., Duan, X., & Wang, S. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b01817 · Cited by 1,179
Rapid electron transfer by the carbon matrix in natural pyrogenic carbon
Sun, T., Levin, B. D. A., Guzman, J. J. L., Enders, A., Muller, D. A., Angenent, L. T., & Lehmann, J. (2017) · Nature Communications · doi:10.1038/ncomms14873 · Cited by 626
Sun, Y., Yu, I. K. M., Tsang, D. C. W., Cao, X., Lin, D., Wang, L., Graham, N. J. D., Alessi, D. S., Komárek, M., Ok, Y. S., et al. (2019) · Environment International · doi:10.1016/j.envint.2019.01.047 · Cited by 489
Self-citationSorption of heavy metals on chitosan-modified biochars and its biological effects
Zhou, Y., Gao, B., Zimmerman, A. R., Fang, J., Sun, Y., & Cao, X. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.07.036 · Cited by 443
Self-citationEnvironmental transformations and ecological effects of iron-based nanoparticles
Lei, C., Sun, Y., Tsang, D. C. W., & Lin, D. (2018) · Environmental Pollution · doi:10.1016/j.envpol.2017.09.052 · Cited by 347
Self-citationYuan, H., Lu, T., Wang, Y., Huang, H., & Chen, Y. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.09.016 · Cited by 176
Cited by
Ball milling as a mechanochemical technology for fabrication of novel biochar nanomaterials
Kumar, M., Xiong, X., Wan, Z., Sun, Y., Tsang, D. C. W., Gupta, J., Gao, B., Cao, X., Tang, J., & Ok, Y. S. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123613 · Cited by 561
Self-citationAmusat, S. O., Kebede, T. G., Dube, S., & Nindi, M. M. (2021) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2021.101993 · Cited by 323
Ambika, S., Kumar, M., Pisharody, L., Malhotra, M., Kumar, G., Sreedharan, V., Singh, L., Nidheesh, P. V., & Bhatnagar, A. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135716 · Cited by 265
Biochar as a support for nanocatalysts and other reagents: Recent advances and applications
Pereira Lopes, R., & Astruc, D. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213585 · Cited by 257
A Review of Non-Soil Biochar Applications
Bartoli, M., Giorcelli, M., Jagdale, P., Rovere, M., & Tagliaferro, A. (2020) · Materials · doi:10.3390/ma13020261 · Cited by 156
“The essential role of biochar in Cr(VI) reduction in Fe–biochar systems has been proven by systematic studies [79,80], as shown in Figure 2, while in another study, the conversion of Cr(VI) to Cr(III) was ascribed to the redox couple Fe(III)/Fe(II) present in the greigite mineral that was used to tailor a biochar surf…”
Background
Metadata
- Authors
- Wang, K., Sun, Y., Tang, J., He, J., & Sun, H.
- Venue
- Chemosphere
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 241
- Pages
- 125044
- ISSN
- 0045-6535 (ISSN-L)
- OpenAlex
- W2978925321
- Cited by
- 227
- References
- 7
- FWCI
- 9.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.