The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Separation and quantification of microalgal carbohydrates
Open accessAbstract
Structural carbohydrates can constitute a large fraction of the dry weight of algal biomass and thus accurate identification and quantification is important for summative mass closure. Two limitations to the accurate characterization of microalgal carbohydrates are the lack of a robust analytical procedure to hydrolyze polymeric carbohydrates to their respective monomers and the subsequent identification and quantification of those monosaccharides. We address the second limitation, chromatographic separation of monosaccharides, here by identifying optimum conditions for the resolution of a synthetic mixture of 13 microalgae-specific monosaccharides, comprised of 8 neutral, 2 amino sugars, 2 uronic acids and 1 alditol (myo-inositol as an internal standard). The synthetic 13-carbohydrate mix showed incomplete resolution across 11 traditional high performance liquid chromatography (HPLC) methods, but showed improved resolution and accurate quantification using anion exchange chromatography (HPAEC) as well as alditol acetate derivatization followed by gas chromatography (for the neutral- and amino-sugars only). We demonstrate the application of monosaccharide quantification using optimized chromatography conditions after sulfuric acid analytical hydrolysis for three model algae strains and compare the quantification and complexity of monosaccharides in analytical hydrolysates relative to a typical terrestrial feedstock, sugarcane bagasse.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Brennan, L., & Owende, P. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.10.009 · Cited by 4,894
Techno-Economic Analysis of Autotrophic Microalgae for Fuel Production
Davis, R., Aden, A., & Pienkos, P. T. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.04.018 · Cited by 1,069
Cited by
Ulvan: A systematic review of extraction, composition and function
Kidgell, J. T., Magnusson, M., de Nys, R., & Glasson, C. R. K. (2019) · Algal Research · doi:10.1016/j.algal.2019.101422 · Cited by 666
A review of high value-added molecules production by microalgae in light of the classification
Levasseur, W., Perré, P., & Pozzobon, V. (2020) · Biotechnology Advances · doi:10.1016/j.biotechadv.2020.107545 · Cited by 546
Production, extraction and characterization of microalgal and cyanobacterial exopolysaccharides
Delattre, C., Pierre, G., Laroche, C., & Michaud, P. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.08.001 · Cited by 488
Recent Advances in Marine Algae Polysaccharides: Isolation, Structure, and Activities
Xu, S.-Y., Huang, X., & Cheong, K.-L. (2017) · Marine Drugs · doi:10.3390/md15120388 · Cited by 414
Production of Bioethanol—A Review of Factors Affecting Ethanol Yield
Tse, T. J., Wiens, D. J., & Reaney, M. J. T. (2021) · Fermentation · doi:10.3390/fermentation7040268 · Cited by 390
Metadata
- Authors
- Templeton, D. W., Quinn, M., Van Wychen, S., Hyman, D., & Laurens, L. M. L.
- Venue
- Journal of Chromatography A
- Publisher
- Elsevier BV
- Published
- 2012-12
- Volume
- 1270
- Pages
- 225-234
- ISSN
- 0021-9673 (ISSN-L)
- OpenAlex
- W1981394544
- Cited by
- 188
- References
- 2
- FWCI
- 2.66
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.