The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Functionally graded lattice structure topology optimization for the design of additive manufactured components with stress constraints
Open accessAbstract
Abstract Advances in additive manufacturing (AM) have drawn considerable interest due to its ability to produce geometrically complex structure, such as lattice materials. In this work, a novel methodology is proposed to design graded lattice structure through topology optimization under stress constraint, in order to generate lightweight lattice structure design with predictable yield performance. Instead of using the power law of material interpolation in the SIMP method, asymptotic homogenization method is employed to compute the effective elastic properties of lattice material in terms of design variable, i.e. relative density. For yield strength, a multiscale failure model is proposed to capture yield strength of microstructure with macroscopic stress. At macroscale, a modified Hill’s yield criterion is employed to describe anisotropic yield strength of lattice material. The material constants in Hill’s model are assumed to be a function of relative density, and thus a model is built up to formulate yield strength of lattice structure with macroscopic stress. The experimental verification on the printed samples demonstrates that both the homogenized elastic model and yield model can accurately describe the elasticity and plasticity of the lattice structure. Based on the proposed material interpolation for lattice structure, a lattice structure topology optimization framework is proposed for minimizing total weight of the structure under stress constraint. The sensitivity analysis is performed for the implementation of the optimization algorithm. Two three-dimensionally numerical examples are performed to demonstrate the effectiveness of the proposed optimization method, as well as accuracy of the proposed homogenization technique for graded lattice structure design. Experiment is conducted to systematically examine yielding of the optimally graded lattice structure design and compare its performance with a uniform structure. It is found that the proposed optimization framework is valid for the design examples examined and can significantly enhance mechanical performance of the structure (i.e. yield loading, stiffness, energy absorption, etc.)
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generating optimal topologies in structural design using a homogenization method
Bendsøe, M. P., & Kikuchi, N. (1988) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(88)90086-2 · Cited by 7,467
The method of moving asymptotes—a new method for structural optimization
Svanberg, K. (1987) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620240207 · Cited by 5,573
A level set method for structural topology optimization
Wang, M. Y., Wang, X., & Guo, D. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(02)00559-5 · Cited by 3,232
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Material interpolation schemes in topology optimization
Bendsøe, M. P., & Sigmund, O. (1999) · Archive of Applied Mechanics (Ingenieur Archiv) · doi:10.1007/s004190050248 · Cited by 2,827
Structural optimization using sensitivity analysis and a level-set method
Allaire, G., Jouve, F., & Toader, A.-M. (2004) · Journal of Computational Physics · doi:10.1016/j.jcp.2003.09.032 · Cited by 2,759
A simple evolutionary procedure for structural optimization
Xie, Y. M., & Steven, G. P. (1993) · Computers & Structures · doi:10.1016/0045-7949(93)90035-c · Cited by 2,707
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Bendsøe, M. P., & Sigmund, O. (2004) · Springer eBooks · doi:10.1007/978-3-662-05086-6 · Cited by 1,727
Cited by
Li, Y., Feng, Z., Hao, L., Huang, L., Xin, C., Wang, Y., Bilotti, E., Essa, K., Zhang, H., Li, Z., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900981 · Cited by 614
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Deep generative modeling for mechanistic-based learning and design of metamaterial systems
Wang, L., Chan, Y.-C., Ahmed, F., Liu, Z., Zhu, P., & Chen, W. (2020) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2020.113377 · Cited by 363
3D-printing process design of lattice compressor impeller based on residual stress and deformation
JIA, D., LI, F., & ZHANG, Y. (2020) · Scientific Reports · doi:10.1038/s41598-019-57131-1 · Cited by 68
Metadata
- Authors
- Cheng, L., Bai, J., & To, A. C.
- Venue
- Computer Methods in Applied Mechanics and Engineering
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 344
- Pages
- 334-359
- ISSN
- 0045-7825 (ISSN-L)
- OpenAlex
- W2898199848
- Cited by
- 306
- References
- 45
- FWCI
- 25.37
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Functionally graded lattice structure topology optimization for the design of additive manufactured components with stress constraints. https://app.cochat.ai/papers/10.1016/j.cma.2018.10.010
- The paper
- Cheng, L., Bai, J., & To, A. C. (2019). Functionally graded lattice structure topology optimization for the design of additive manufactured components with stress constraints. Computer Methods in Applied Mechanics and Engineering. https://doi.org/10.1016/j.cma.2018.10.010
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.