The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Investigation of processing parameters on tensile performance for FDM-printed carbon fiber reinforced polyamide 6 composites
Abstract
Abstract In the present work, short carbon fiber reinforced polyamide 6 (CF/PA6) as fused deposition modelling (FDM) feedstock is developed in order to manufacture lightweight honeycomb structure with low cost and enhanced mechanical performance. The effects of processing parameters during FDM printing on mechanical properties and interlayer adhesion are investigated. First, tensile properties of FDM-printed CF/PA6 specimens with three different printing directions are evaluated. It is found that CF/PA6 printed along tensile loading direction exhibits higher tensile properties than the other two printing direction, indicating a strong anisotropy of mechanical properties adjusted by printing orientation. Secondly, build-plate temperature of FDM printer plays an important role in tensile performance of CF/PA6 specimens. With increasing build-plate temperature, an increase in tensile strength of FDM-printed CF/PA6 specimens is obtained. Also, the single lap-shear strength in printed CF/PA6 are improved by using high build-plate temperature, which is probably caused by the reduced voids and enhanced interlayer bonding. Finally, re-entrant honeycomb structures are successfully FDM-printed using fabricated CF/PA6 filaments, exhibiting remarkable energy absorption capacity and good rebound behavior. The present work provides a high-performance composite feedstock for FDM and key relationship between processing behavior and mechanical performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties
Stepashkin, А. А., Chukov, D. I., Senatov, F. S., Salimon, A. I., Korsunsky, A. M., & Kaloshkin, S. D. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.05.032 · Cited by 293
Cited by
Advances in 3D printing for polymer composites: A review
Ma, T., Zhang, Y., Ruan, K., Guo, H., He, M., Shi, X., Guo, Y., Kong, J., & Gu, J. (2024) · InfoMat · doi:10.1002/inf2.12568 · Cited by 310
Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review
Karimi, A., Rahmatabadi, D., & Baghani, M. (2024) · Polymers · doi:10.3390/polym16060831 · Cited by 201
Metadata
- Authors
- Peng, X., Zhang, M., Guo, Z., Sang, L., & Hou, W.
- Venue
- Composites Communications
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 22
- Pages
- 100478
- ISSN
- 2452-2139 (ISSN-L)
- OpenAlex
- W3083279550
- Cited by
- 177
- References
- 2
- FWCI
- 7.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Investigation of processing parameters on tensile performance for FDM-printed carbon fiber reinforced polyamide 6 composites. https://app.cochat.ai/papers/10.1016/j.coco.2020.100478
- The paper
- Peng, X., Zhang, M., Guo, Z., Sang, L., & Hou, W. (2020). Investigation of processing parameters on tensile performance for FDM-printed carbon fiber reinforced polyamide 6 composites. Composites Communications. https://doi.org/10.1016/j.coco.2020.100478
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.