CoChat
Cited by 201

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Freeze-thaw performance of a cement-treated expansive soil

Lu, Yang, Liu, Sihong, Zhang, Yonggan, Li, Zhuo, Xu, Lei · 2020 · Cold Regions Science and Technology

Abstract

This experimental study presents an attempt on the effect of cement addition to expansive soil on its deformation and strength behaviours when subjected to freezing–thawing (F–T) action. A series of laboratory tests on cemented-treated expansive clay samples after 28–d curing periods were conducted. The experimental program involved freezing–thawing test, volume measurement, and unconfined compression test. The effects were evaluated by focusing on the water loss, volume change, stress-strain response, unconfined compression strength, resilient modulus and strain at failure after a sequence of freeze–thaw cycles. Eight groups of expansive soil samples were prepared with four different cement contents (i.e. 0%, 3%, 5% and 7% by weight of soil) and subjected to 0, 1, 2, 3, 5, 7, 9, and 12 F–T cycles, respectively. The analysis of experimental results indicated that: 1) Cement additive makes expansive soil become less sensitive to moisture and cement–induced hydration reaction will reduce swelling–shrinkage characteristics triggered by F–T cycles; 2) The inclusion of cement within expansive soil causes an increase in unconfined compressive strength, resilient modulus, but a decrease in strain at failure. However, such effect induced by cement will be diluted by F–T cycles; 3) Cement can retard the degradation of resilient modulus but increase a faster strength reduction against F–T weathering. 4) Upon F–T cycles, un–cemented expansive soil will become more brittle, while cement-treated soils more ductile before 1st F-T cycle. A power function, independent of F–T cycles and cement contents, exists between the strain at failure and UCS. The results obtained from the study are fairly promising to employ cement additive against freeze–thaw resistance of expansive soils.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.coldregions.2019.102926

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 201

Metadata

Authors
Lu, Y., Liu, S., Zhang, Y., Li, Z., & Xu, L.
Venue
Cold Regions Science and Technology
Publisher
Elsevier BV
Published
2020-02
Volume
170
Pages
102926
ISSN
0165-232X (ISSN-L)
OpenAlex
W2989231563
Cited by
201
References
1
FWCI
15.14
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.