The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Experimental and kinetic modeling study of laminar burning velocities of NH3/air, NH3/H2/air, NH3/CO/air and NH3/CH4/air premixed flames
Abstract
Abstract Ammonia (NH3) is a promising energy carrier to store and transport renewable hydrogen (H2) that can be generated using, e.g., wind and solar energy. Direct combustion of NH3 is one of the possible methods to utilize the energy by the end users. To understand the combustion characteristics of NH3 as a fuel, the laminar burning velocities of NH3/air, NH3/H2/air, NH3/CO/air and NH3/CH4/air premixed flames were investigated experimentally using the heat flux method. Measurements are reported for a wide range of equivalence ratios and blending ratios. Kinetic modeling was also performed using available chemical kinetic mechanisms, namely the GRI-Mech 3.0, the Okafor et al. and the San Diego mechanisms. The experimental results for NH3/air flames agree well with the literature data and it is found that blending NH3 with H2 is the most effective manner to increase the burning velocity of NH3 based fuel mixtures. None of the kinetic mechanisms used can accurately predict most of the measured data. Sensitivity and reaction path analyses indicate that the oxidation of NH3 blended with the additive fuels considered can be understood as the parallel oxidation processes of the individual fuels, and that the source of discrepancy between the experimental and modeling results is related to the inaccuracy of the rate parameters of the N-containing reactions. In this regard, the present detailed and reliable experimental data is of special value for model development and validation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemkin-II: A Fortran chemical kinetics package for the analysis of gas-phase chemical kinetics
Kee, R. J., Rupley, F. M., & Miller, J. H. (1989) · doi:10.2172/5681118 · Cited by 3,598
Science and technology of ammonia combustion
Kobayashi, H., Hayakawa, A., Somarathne, K. D. K. A., & Okafor, E. C. (2019) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2018.09.029 · Cited by 2,532
Modeling nitrogen chemistry in combustion
Glarborg, P., Miller, J. A., Ruscic, B., & Klippenstein, S. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.01.002 · Cited by 1,998
Experimental and numerical study of the laminar burning velocity of CH4–NH3–air premixed flames
Okafor, E. C., Naito, Y., Colson, S., Ichikawa, A., Kudo, T., Hayakawa, A., & Kobayashi, H. (2018) · Combustion and Flame · doi:10.1016/j.combustflame.2017.09.002 · Cited by 1,068
Reiter, A. J., & Kong, S.-C. (2011) · Fuel · doi:10.1016/j.fuel.2010.07.055 · Cited by 858
Laminar burning velocity and Markstein length of ammonia/air premixed flames at various pressures
Hayakawa, A., Goto, T., Mimoto, R., Arakawa, Y., Kudo, T., & Kobayashi, H. (2015) · Fuel · doi:10.1016/j.fuel.2015.06.070 · Cited by 854
Implementation of the NCN pathway of prompt-NO formation in the detailed reaction mechanism
Konnov, A. A. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.03.016 · Cited by 689
Ammonia as a green fuel and hydrogen source for vehicular applications
Zamfirescu, C., & Dincer, I. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.02.004 · Cited by 674
Structure, aerodynamics, and geometry of premixed flamelets
Law, C. K., & Sung, C. (2000) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(00)00018-6 · Cited by 658
An experimental and kinetic modeling study of premixed NH3/CH4/O2/Ar flames at low pressure
Tian, Z., Li, Y., Zhang, L., Glarborg, P., & Qi, F. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.03.005 · Cited by 635
Kurata, O., Iki, N., Matsunuma, T., Inoue, T., Tsujimura, T., Furutani, H., Kobayashi, H., & Hayakawa, A. (2017) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2016.07.088 · Cited by 582
Konnov, A. A., Mohammad, A., Kishore, V. R., Kim, N. I., Prathap, C., & Kumar, S. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.05.003 · Cited by 581
Ichikawa, A., Hayakawa, A., Kitagawa, Y., Kunkuma Amila Somarathne, K. D., Kudo, T., & Kobayashi, H. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.04.024 · Cited by 540
Ammonia chemistry in oxy-fuel combustion of methane
Mendiara, T., & Glarborg, P. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.07.006 · Cited by 470
Study on using hydrogen and ammonia as fuels: Combustion characteristics and NOxformation
Li, J., Huang, H., Kobayashi, N., He, Z., & Nagai, Y. (2014) · International Journal of Energy Research · doi:10.1002/er.3141 · Cited by 462
Reiter, A. J., & Kong, S.-C. (2008) · Energy & Fuels · doi:10.1021/ef800140f · Cited by 440
Flammability limits, ignition energy, and flame speeds in H2–CH4–NH3–N2O–O2–N2 mixtures
Pfahl, U. J., Ross, M. C., Shepherd, J. E., Pasamehmetoglu, K. O., & Unal, C. (2000) · Combustion and Flame · doi:10.1016/s0010-2180(00)00152-8 · Cited by 405
Flame/stretch interactions of premixed hydrogen-fueled flames: measurements and predictions
Kwon, O. C., & Faeth, G. M. (2001) · Combustion and Flame · doi:10.1016/s0010-2180(00)00229-7 · Cited by 367
Zero emission targets as long-term global goals for climate protection
Rogelj, J., Schaeffer, M., Meinshausen, M., Knutti, R., Alcamo, J., Riahi, K., & Hare, W. (2015) · Environmental Research Letters · doi:10.1088/1748-9326/10/10/105007 · Cited by 361
Studies on properties of laminar premixed hydrogen-added ammonia/air flames for hydrogen production
Lee, J. H., Kim, J. H., Park, J. H., & Kwon, O. C. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.11.071 · Cited by 360
Burning velocity measurements of nitrogen-containing compounds
Takizawa, K., Takahashi, A., Tokuhashi, K., Kondo, S., & Sekiya, A. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.11.089 · Cited by 345
Ammonia combustion properties and performance in gas-turbine burners
Verkamp, F. J., Hardin, M. C., & Williams, J. R. (1967) · Symposium (International) on Combustion · doi:10.1016/s0082-0784(67)80225-x · Cited by 339
Kumar, P., & Meyer, T. R. (2013) · Fuel · doi:10.1016/j.fuel.2012.06.103 · Cited by 314
Service, R. F. (2018) · Science · doi:10.1126/science.361.6398.120 · Cited by 311
da Rocha, R. C., Costa, M., & Bai, X.-S. (2019) · Fuel · doi:10.1016/j.fuel.2019.02.102 · Cited by 295
Self-citationEffect of Chemistry and Transport Properties on Near-Limit Flames at Microgravity
Ronney, P. D. (1988) · Combustion Science and Technology · doi:10.1080/00102208808947092 · Cited by 258
Measurements of Laminar Flame Velocity for Components of Natural Gas
Patricia Dirrenberger, B., Gall, H. L., Bounaceur, R., Herbinet, O., Glaude, P., Konnov, A. A., & Frédérique Battin‐leclerc, B. (2011) · Energy & Fuels · doi:10.1021/ef200707h · Cited by 242
Syngas Combustion Kinetics and Applications
Chaos, M., & Dryer, F. L. (2008) · Combustion Science and Technology · doi:10.1080/00102200801963011 · Cited by 216
Wind-powered ammonia fuel production for remote islands: A case study
Morgan, E., Manwell, J., & McGowan, J. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.06.034 · Cited by 203
He, Y., Wang, Z., Weng, W., Zhu, Y., Zhou, J., & Cen, K. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.03.216 · Cited by 49
Self-citation
Cited by
Review on Ammonia as a Potential Fuel: From Synthesis to Economics
Valera-Medina, A., Amer-Hatem, F., Azad, A. K., Dedoussi, I. C., de Joannon, M., Fernandes, R. X., Glarborg, P., Hashemi, H., He, X., Mashruk, S., et al. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03685 · Cited by 1,061
Self-citationA review on ammonia, ammonia-hydrogen and ammonia-methane fuels
Chai, W. S., Bao, Y., Jin, P., Tang, G., & Zhou, L. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111254 · Cited by 1,028
Mei, B., Zhang, X., Ma, S., Cui, M., Guo, H., Cao, Z., & Li, Y. (2019) · Combustion and Flame · doi:10.1016/j.combustflame.2019.08.033 · Cited by 652
Shrestha, K. P., Lhuillier, C., Barbosa, A. A., Brequigny, P., Contino, F., Mounaïm-Rousselle, C., Seidel, L., & Mauss, F. (2021) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2020.06.197 · Cited by 641
Review on the recent advances on ammonia combustion from the fundamentals to the applications
Elbaz, A. M., Wang, S., Guiberti, T. F., & Roberts, W. L. (2022) · Fuel Communications · doi:10.1016/j.jfueco.2022.100053 · Cited by 639
Metadata
- Authors
- Han, X., Wang, Z., Costa, M., Sun, Z., He, Y., & Cen, K.
- Venue
- Combustion and Flame
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 206
- Pages
- 214-226
- ISSN
- 0010-2180 (ISSN-L)
- OpenAlex
- W2945042646
- Cited by
- 869
- References
- 30
- FWCI
- 23.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.