The DOI matches its Crossref record; 90 of the 90 references it cites were found in a registry or an index.
A comprehensive review of measurements and data analysis of laminar burning velocities for various fuel+air mixtures
Abstract
Abstract Accurate measurement and prediction of laminar burning velocity is important for characterization of premixed combustion properties of a fuel, development and validation of new kinetic models, and calibration of turbulent combustion models. Understanding the variation of laminar burning velocity with thermodynamic conditions is important from the perspective of practical applications in industrial furnaces, gas turbine combustors and rocket engines as operating temperatures and pressures are significantly higher than ambient conditions. With this perspective, a brief review of spherical flame propagation method, counterflow/stagnation burner method, heat-flux method, annular stepwise method, externally heated diverging channel method, and Bunsen method is presented. A direct comparison of power exponents for temperature (α) and pressure (β) obtained from different experiments and derived from various kinetic mechanisms is reported to provide an independent tool for detailed validation of kinetic schemes. Accurate prediction of laminar burning velocities at higher temperatures and pressures for individual fuels will help in closer scrutiny of the existing experimental data for various uncertainties due to inherent challenges in individual measurement techniques. Laminar burning velocity data for hydrogen (H2), gaseous alkane fuels (methane, ethane, propane, n-butane, n-pentane), liquid alkane fuels (n-heptane, isooctane, n-decane), alcohols (CH3OH, C2H5OH, n-propanol, n-butanol, n-pentanol) and di-methyl ether (DME) are obtained from literature of last three decades for a wide range of pressures (1–10 bar), temperatures (300–700 K), equivalence ratios and mixture dilutions. The available experimental and numerical data for H2 and methane fuels compares well for various pressures and temperatures. However, more experimental and kinetic model development studies are required for other fuels. Comparison of laminar burning velocity data obtained from different measurement techniques at higher initial pressures and temperatures showed significant deviations for all fuels. This suggests to conduct focused measurements at elevated pressure and temperature conditions for different fuels to enable the development of accurate kinetic models for wider range of mixtures and thermodynamic conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Environmental, economic, and energetic costs and benefits of biodiesel and ethanol biofuels
Hill, J., Nelson, E., Tilman, D., Polasky, S., & Tiffany, D. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0604600103 · Cited by 2,871
Goodwin, D. G., Moffat, H. K., Schoegl, I. M., Speth, R. L., & Weber, B. W. (2017) · Figshare · doi:10.5281/zenodo.742000 · Cited by 2,111
Kuo, K. K. (1986) · Cited by 1,855
Lefebvre, A. H., & Whitelaw, J. H. (1984) · International Journal of Heat and Fluid Flow · doi:10.1016/0142-727x(84)90057-2 · Cited by 1,838
A comprehensive modeling study of hydrogen oxidation
Ó Conaire, M., Curran, H. J., Simmie, J. M., Pitz, W. J., & Westbrook, C. K. (2004) · International Journal of Chemical Kinetics · doi:10.1002/kin.20036 · Cited by 1,226
Proceedings of ASME Turbo Expo 2014
Yunusa‐Kaltungo, A. (2014) · Research Explorer (The University of Manchester) · Cited by 1,206
Cavaliere, A., & de Joannon, M. (2004) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2004.02.003 · Cited by 1,206
Dimethyl ether (DME) as an alternative fuel
Semelsberger, T. A., Borup, R. L., & Greene, H. L. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.05.082 · Cited by 1,201
Flameless oxidation to reduce thermal no-formation
Wünning, J. A. (1997) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(97)00006-3 · Cited by 1,139
Kinetic modeling of gasoline surrogate components and mixtures under engine conditions
Mehl, M., Pitz, W. J., Westbrook, C. K., et al. (2010) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2010.05.027 · Cited by 1,104
Cited by
Han, X., Wang, Z., Costa, M., Sun, Z., He, Y., & Cen, K. (2019) · Combustion and Flame · doi:10.1016/j.combustflame.2019.05.003 · Cited by 869
Okafor, E. C., Naito, Y., Colson, S., Ichikawa, A., Kudo, T., Hayakawa, A., & Kobayashi, H. (2019) · Combustion and Flame · doi:10.1016/j.combustflame.2019.03.008 · Cited by 593
Wang, Z., Han, X., He, Y., Zhu, R., Zhu, Y., Zhou, Z., & Cen, K. (2021) · Combustion and Flame · doi:10.1016/j.combustflame.2021.02.038 · Cited by 371
Ammonia as a Carbon-Free Energy Carrier: NH3 Cracking to H2
Spatolisano, E., Pellegrini, L. A., de Angelis, A. R., Cattaneo, S., & Roccaro, E. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c01419 · Cited by 293
Metadata
- Authors
- Konnov, A. A., Mohammad, A., Kishore, V. R., Kim, N. I., Prathap, C., & Kumar, S.
- Venue
- Progress in Energy and Combustion Science
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 68
- Pages
- 197-267
- ISSN
- 0360-1285 (ISSN-L)
- OpenAlex
- W2809140474
- Cited by
- 581
- References
- 90
- FWCI
- 24.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A comprehensive review of measurements and data analysis of laminar burning velocities for various fuel+air mixtures. https://app.cochat.ai/papers/10.1016/j.pecs.2018.05.003
- The paper
- Konnov, A. A., Mohammad, A., Kishore, V. R., Kim, N. I., Prathap, C., & Kumar, S. (2018). A comprehensive review of measurements and data analysis of laminar burning velocities for various fuel+air mixtures. Progress in Energy and Combustion Science. https://doi.org/10.1016/j.pecs.2018.05.003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.