The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Experimental and kinetic modeling investigation on the laminar flame propagation of ammonia under oxygen enrichment and elevated pressure conditions
Abstract
Abstract Ammonia is attracting more and more attentions due to its role as both a carbon-free fuel for gas turbines and an effective H2 carrier. Only a limit number of investigations on the laminar flame propagation and laminar burning velocity of ammonia have been performed on elevated pressures, which were focused on ammonia/air mixtures and suffered strong buoyancy effect. In this work, laminar flame propagation of ammonia/O2/N2 mixtures covering wide ranges of equivalence ratios, oxygen contents and initial pressures was investigated in a high-pressure constant-volume cylindrical combustion vessel. The oxygen enrichment speeds up the spherically expanding flames and consequently reduces buoyancy effect on the laminar flame propagation of ammonia. The laminar burning velocity was observed to increase with the increasing oxygen content, but decrease with the increasing initial pressure. A kinetic model of ammonia combustion consisting 38 species and 265 reactions was constructed from previous models with updated rate constants of important reactions. The present model can reasonably reproduce the laminar burning velocity data in this work and literature, as well as the ignition delay time and speciation data in literature. Based on the model analysis, effects of oxygen enrichment, equivalence ratio and initial pressure on laminar burning velocities of ammonia were analyzed in detail. It is revealed that the enhanced flame propagation with oxygen enrichment is mainly due to the increase of adiabatic flame temperature which in turn leads to higher concentrations of key radicals like H, OH and NH2. For NH3 and its major decomposition products like NH2 and NH, reactions with oxygenated species such as OH, O, O2 and NO are generally more important in the lean flames, while the role of reactions with H, NH and NH2 becomes crucial in the rich flames. The calculated pressure dependent coefficient indicates that NH3/O2/N2 flames exhibit clear pressure dependence, while this pressure dependence is weaker than those of the hydrocarbon and biofuel flames.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanism and modeling of nitrogen chemistry in combustion
Miller, J. A., & Bowman, C. T. (1989) · Progress in Energy and Combustion Science · doi:10.1016/0360-1285(89)90017-8 · Cited by 3,172
Science and technology of ammonia combustion
Kobayashi, H., Hayakawa, A., Somarathne, K. D. K. A., & Okafor, E. C. (2019) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2018.09.029 · Cited by 2,532
Modeling nitrogen chemistry in combustion
Glarborg, P., Miller, J. A., Ruscic, B., & Klippenstein, S. J. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.01.002 · Cited by 1,998
Evaluated Kinetic Data for Combustion Modeling. Supplement I
Baulch, D. L., Cobos, C. J., Cox, R. A., Frank, P., Hayman, G., Just, T., Kerr, J. A., Murrells, T., Pilling, M. J., Troe, J., et al. (1994) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555953 · Cited by 1,583
Evaluated Kinetic Data for Combustion Modeling: Supplement II
Baulch, D. L., Bowman, C. T., Cobos, C. J., Cox, R. A., Just, T., Kerr, J. A., Pilling, M. J., Stocker, D., Troe, J., Tsang, W., et al. (2005) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.1748524 · Cited by 1,457
Experimental and numerical study of the laminar burning velocity of CH4–NH3–air premixed flames
Okafor, E. C., Naito, Y., Colson, S., Ichikawa, A., Kudo, T., Hayakawa, A., & Kobayashi, H. (2018) · Combustion and Flame · doi:10.1016/j.combustflame.2017.09.002 · Cited by 1,068
Ranzi, E., Frassoldati, A., Grana, R., et al. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.03.004 · Cited by 1,027
Using ammonia as a sustainable fuel
Zamfirescu, C., & Dincer, I. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.02.097 · Cited by 875
Han, X., Wang, Z., Costa, M., Sun, Z., He, Y., & Cen, K. (2019) · Combustion and Flame · doi:10.1016/j.combustflame.2019.05.003 · Cited by 869
Laminar burning velocity and Markstein length of ammonia/air premixed flames at various pressures
Hayakawa, A., Goto, T., Mimoto, R., Arakawa, Y., Kudo, T., & Kobayashi, H. (2015) · Fuel · doi:10.1016/j.fuel.2015.06.070 · Cited by 854
Cited by
Review on Ammonia as a Potential Fuel: From Synthesis to Economics
Valera-Medina, A., Amer-Hatem, F., Azad, A. K., Dedoussi, I. C., de Joannon, M., Fernandes, R. X., Glarborg, P., Hashemi, H., He, X., Mashruk, S., et al. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03685 · Cited by 1,061
A review on ammonia, ammonia-hydrogen and ammonia-methane fuels
Chai, W. S., Bao, Y., Jin, P., Tang, G., & Zhou, L. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111254 · Cited by 1,028
An experimental, theoretical and kinetic-modeling study of the gas-phase oxidation of ammonia
Stagni, A., Cavallotti, C., Arunthanayothin, S., Song, Y., Herbinet, O., Battin-Leclerc, F., & Faravelli, T. (2020) · Reaction Chemistry & Engineering · doi:10.1039/c9re00429g · Cited by 742
Shrestha, K. P., Lhuillier, C., Barbosa, A. A., Brequigny, P., Contino, F., Mounaïm-Rousselle, C., Seidel, L., & Mauss, F. (2021) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2020.06.197 · Cited by 641
Review on the recent advances on ammonia combustion from the fundamentals to the applications
Elbaz, A. M., Wang, S., Guiberti, T. F., & Roberts, W. L. (2022) · Fuel Communications · doi:10.1016/j.jfueco.2022.100053 · Cited by 639
Experimental study on ammonia/hydrogen/air combustion in spark ignition engine conditions
Lhuillier, C., Brequigny, P., Contino, F., & Mounaïm-Rousselle, C. (2020) · Fuel · doi:10.1016/j.fuel.2020.117448 · Cited by 618
Lhuillier, C., Brequigny, P., Lamoureux, N., Contino, F., & Mounaïm-Rousselle, C. (2020) · Fuel · doi:10.1016/j.fuel.2019.116653 · Cited by 490
Wang, S., Wang, Z., Elbaz, A. M., Han, X., He, Y., Costa, M., Konnov, A. A., & Roberts, W. L. (2020) · Combustion and Flame · doi:10.1016/j.combustflame.2020.08.004 · Cited by 342
Berwal, P., Kumar, S., & Khandelwal, B. (2021) · Journal of the Energy Institute · doi:10.1016/j.joei.2021.10.001 · Cited by 268
Ammonia as Green Fuel in Internal Combustion Engines: State-of-the-Art and Future Perspectives
Tornatore, C., Marchitto, L., Sabia, P., & De Joannon, M. (2022) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2022.944201 · Cited by 204
On the use of ammonia as a fuel – A perspective
Herbinet, O., Bartocci, P., & Grinberg Dana, A. (2022) · Fuel Communications · doi:10.1016/j.jfueco.2022.100064 · Cited by 184
Ammonia combustion and emissions in practical applications: A review
Alnajideen, M., Shi, H., Northrop, W., Emberson, D., Kane, S., Czyzewski, P., Alnaeli, M., Mashruk, S., Rouwenhorst, K., Yu, C., et al. (2024) · Carbon Neutrality · doi:10.1007/s43979-024-00088-6 · Cited by 146
Metadata
- Authors
- Mei, B., Zhang, X., Ma, S., Cui, M., Guo, H., Cao, Z., & Li, Y.
- Venue
- Combustion and Flame
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 210
- Pages
- 236-246
- ISSN
- 0010-2180 (ISSN-L)
- OpenAlex
- W2972204853
- Cited by
- 652
- References
- 42
- FWCI
- 19.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.