The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Intelligent fault diagnosis of rotating machinery based on one-dimensional convolutional neural network
Abstract
Abstract Fault diagnosis of rotating machinery plays a significant role in the reliability and safety of modern industrial systems. The traditional fault diagnosis methods usually need manually extracting the features from raw sensor data before classifying them with pattern recognition models. This requires much professional knowledge and complex feature extraction, only to cause results in a poor flexibility of the model, which only applies to the diagnosis of a fault in particular equipment. In recent years, deep learning has developed rapidly, and great achievements have been made in image analysis, speech recognition and natural language processing. However, its application in fault diagnosis of rotating machinery is still at the initial stage. In order to solve the problem of end-to-end fault diagnosis, this paper focuses on developing a convolutional neural network to learn features directly from the original vibration signals and then diagnose faults. The effectiveness of the proposed method is validated through PHM (Prognostics and Health Management) 2009 gearbox challenge data and a planetary gearbox test rig. Compared with the other three traditional methods, the results show that the one-dimensional convolutional neural network (1-DCNN) model has higher accuracy for fixed-shaft gearbox and planetary gearbox fault diagnosis than that of the traditional diagnostic ones.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Nearest neighbor pattern classification
Cover, T., & Hart, P. (1967) · IEEE Transactions on Information Theory · doi:10.1109/tit.1967.1053964 · Cited by 16,936
An Introduction to Support Vector Machines and Other Kernel-based Learning Methods
Cristianini, N., & Shawe-Taylor, J. (2000) · doi:10.1017/cbo9780511801389 · Cited by 13,855
An Introduction to Support Vector Machines and Other Kernel‐based Learning Methods
(2001) · Kybernetes · doi:10.1108/k.2001.30.1.103.6 · Cited by 3,308
Convolutional Neural Network Based Fault Detection for Rotating Machinery
Janssens, O., Slavkovikj, V., Vervisch, B., Stockman, K., Loccufier, M., Verstockt, S., Van de Walle, R., & Van Hoecke, S. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.05.027 · Cited by 1,255
Jing, L., Zhao, M., Li, P., & Xu, X. (2017) · Measurement · doi:10.1016/j.measurement.2017.07.017 · Cited by 698
Ding, X., & He, Q. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2674738 · Cited by 489
Gearbox fault diagnosis based on deep random forest fusion of acoustic and vibratory signals
Li, C., Sanchez, R.-V., Zurita, G., Cerrada, M., Cabrera, D., & Vásquez, R. E. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.02.007 · Cited by 470
Gearbox Fault Identification and Classification with Convolutional Neural Networks
Chen, Z., Li, C., & Sanchez, R.-V. (2015) · Shock and Vibration · doi:10.1155/2015/390134 · Cited by 391
Vibration-Based Intelligent Fault Diagnosis for Roller Bearings in Low-Speed Rotating Machinery
Song, L., Wang, H., & Chen, P. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2806984 · Cited by 298
Apple flower detection using deep convolutional networks
Dias, P. A., Tabb, A., & Medeiros, H. (2018) · Computers in Industry · doi:10.1016/j.compind.2018.03.010 · Cited by 265
Muralidharan, V., & Sugumaran, V. (2012) · Applied Soft Computing · doi:10.1016/j.asoc.2012.03.021 · Cited by 241
Cui, L., Huang, J., & Zhang, F. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2698359 · Cited by 223
Cui, L., Huang, J., Zhang, F., & Chu, F. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.09.043 · Cited by 129
Sun, W., Yao, B., Zeng, N., Chen, B., He, Y., Cao, X., & He, W. (2017) · Materials · doi:10.3390/ma10070790 · Cited by 117
Multi-source data fusion using deep learning for smart refrigerators
Zhang, W., Zhang, Y., Zhai, J., Zhao, D., Xu, L., Zhou, J., Li, Z., & Yang, S. (2017) · Computers in Industry · doi:10.1016/j.compind.2017.09.001 · Cited by 62
He, H., Caudell, T. P., Menicucci, D., & Mammoli, A. A. (2012) · Solar Energy · doi:10.1016/j.solener.2012.05.015 · Cited by 21
Multi-view pedestrian captioning with an attention topic CNN model
Liu, Q., Chen, Y., Wang, J., & Zhang, S. (2018) · Computers in Industry · doi:10.1016/j.compind.2018.01.015 · Cited by 13
Cited by
A review of the application of deep learning in intelligent fault diagnosis of rotating machinery
Zhu, Z., Lei, Y., Qi, G., Chai, Y., Mazur, N., An, Y., & Huang, X. (2023) · Measurement · doi:10.1016/j.measurement.2022.112346 · Cited by 731
Cheng, Y., Lin, M., Wu, J., Zhu, H., & Shao, X. (2021) · Knowledge-Based Systems · doi:10.1016/j.knosys.2021.106796 · Cited by 349
A hybrid deep-learning model for fault diagnosis of rolling bearings
Xu, Y., Li, Z., Wang, S., Li, W., Sarkodie-Gyan, T., & Feng, S. (2021) · Measurement · doi:10.1016/j.measurement.2020.108502 · Cited by 326
A Deep Learning Model for Smart Manufacturing Using Convolutional LSTM Neural Network Autoencoders
Essien, A., & Giannetti, C. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2967556 · Cited by 318
Saufi, S. R., Ahmad, Z. A. B., Leong, M. S., & Lim, M. H. (2019) · IEEE Access · doi:10.1109/access.2019.2938227 · Cited by 312
Metadata
- Authors
- Wu, C., Jiang, P., Ding, C., Feng, F., & Chen, T.
- Venue
- Computers in Industry
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 108
- Pages
- 53-61
- ISSN
- 0166-3615 (ISSN-L)
- OpenAlex
- W2917014261
- Cited by
- 354
- References
- 18
- FWCI
- 23.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.