The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
A novel convolutional neural network based fault recognition method via image fusion of multi-vibration-signals
Abstract
This paper proposed a novel fault recognition method for rotating machinery on the basis of multi-sensor data fusion and bottleneck layer optimized convolutional neural network (MB-CNN). A conversion method converting vibration signals from multiple sensors to images is proposed that can integrate information to get richer features than vibration signals from single sensor. By this method feature maps of different fault types can be obtained without tedious parameter adjustments. Based on the feature maps from multi-sensor data, a corresponding novel convolutional neural network is also constructed. The constructed network performs the bottleneck layers with an increased number of input features to avoid information lost. The data at the same time node can be fused by the convolutional kernels of which the size matches the number of sensors. Practical examples of diagnosis for the wind power test rig and the centrifugal pump test rig are given in order to verify the effectiveness of the proposed approaches, and prediction accuracy of 99.47% and 97.32% is obtained respectively. Otherwise, the performances of other conventional methods such as deep belief network (DBN), support vector machine (SVM) and artificial neural network (ANN) are evaluated for contrast with the proposed method. As shown in the results, the novel convolutional neural network obtains higher recognition accuracy and faster convergence speed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2016) · 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2016.90 · Cited by 235,474
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Going deeper with convolutions
Szegedy, C., Liu, W., Jia, Y., Sermanet, P., Reed, S., Anguelov, D., Erhan, D., Vanhoucke, V., & Rabinovich, A. (2015) · 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2015.7298594 · Cited by 48,562
A survey on deep learning in medical image analysis
Litjens, G., Kooi, T., Bejnordi, B. E., Setio, A. A. A., Ciompi, F., Ghafoorian, M., van der Laak, J. A. W. M., van Ginneken, B., & Sánchez, C. I. (2017) · Medical Image Analysis · doi:10.1016/j.media.2017.07.005 · Cited by 15,332
3D Convolutional Neural Networks for Human Action Recognition
Ji, S., Xu, W., Yang, M., & Yu, K. (2013) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2012.59 · Cited by 6,235
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2015) · arXiv · doi:10.48550/arxiv.1512.03385 · Cited by 4,196
Deep learning and its applications to machine health monitoring
Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.05.050 · Cited by 2,894
Going Deeper with Convolutions
Szegedy, C., Liu, W., Jia, Y., Sermanet, P., Reed, S., Anguelov, D., Erhan, D., Vanhoucke, V., & Rabinovich, A. (2014) · arXiv · doi:10.48550/arxiv.1409.4842 · Cited by 1,461
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2582729 · Cited by 1,407
Deep Convolutional Neural Networks and Data Augmentation for Environmental Sound Classification
Salamon, J., & Bello, J. P. (2017) · IEEE Signal Processing Letters · doi:10.1109/lsp.2017.2657381 · Cited by 1,364
Lung pattern classification for interstitial lung diseases using a deep convolutional neural network
Anthimopoulos, M., Christodoulidis, S., Ebner, L., Christe, A., & Mougiakakou, S. (2016) · IEEE Transactions on Medical Imaging · doi:10.1109/tmi.2016.2535865 · Cited by 1,343
Chen, Z., & Li, W. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2669947 · Cited by 883
A novel fault diagnosis technique for photovoltaic systems based on artificial neural networks
Chine, W., Mellit, A., Lughi, V., Malek, A., Sulligoi, G., & Pavan, A. M. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.01.036 · Cited by 544
Ding, X., & He, Q. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2674738 · Cited by 489
Fault diagnosis and remaining useful life estimation of aero engine using LSTM neural network
Yuan, M., Wu, Y., & Lin, L. (2016) · 2016 IEEE International Conference on Aircraft Utility Systems (AUS) · doi:10.1109/aus.2016.7748035 · Cited by 377
Industrial Internet of Things: Cybermanufacturing Systems
(2017) · Springer Series in Wireless Technology · doi:10.1007/978-3-319-42559-7 · Cited by 348
Liu, R., Meng, G., Yang, B., Sun, C., & Chen, X. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2016.2645238 · Cited by 345
Vibration-Based Intelligent Fault Diagnosis for Roller Bearings in Low-Speed Rotating Machinery
Song, L., Wang, H., & Chen, P. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2806984 · Cited by 298
Self-citationLearning Hand-Eye Coordination for Robotic Grasping with Large-Scale Data Collection
Levine, S., Pastor, P., Krizhevsky, A., & Quillen, D. (2017) · Springer Proceedings in Advanced Robotics · doi:10.1007/978-3-319-50115-4_16 · Cited by 274
WPD-PCA-Based Laser Welding Process Monitoring and Defects Diagnosis by Using FNN and SVM
You, D., Gao, X., & Katayama, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2319216 · Cited by 271
Rolling bearing fault detection using continuous deep belief network with locally linear embedding
Shao, H., Jiang, H., Li, X., & Liang, T. (2018) · Computers in Industry · doi:10.1016/j.compind.2018.01.005 · Cited by 182
Time-frequency atoms-driven support vector machine method for bearings incipient fault diagnosis
Liu, R., Yang, B., Zhang, X., Wang, S., & Chen, X. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.12.020 · Cited by 176
On-line life cycle health assessment for lithium-ion battery in electric vehicles
Liu, D., Song, Y., Li, L., Liao, H., & Peng, Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.06.182 · Cited by 151
An On-Line State of Health Estimation of Lithium-Ion Battery Using Unscented Particle Filter
Liu, D., Yin, X., Song, Y., Liu, W., & Peng, Y. (2018) · IEEE Access · doi:10.1109/access.2018.2854224 · Cited by 134
Cui, L., Huang, J., Zhang, F., & Chu, F. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.09.043 · Cited by 129
Self-citationPlanetary Gears Feature Extraction and Fault Diagnosis Method Based on VMD and CNN
Liu, C., Cheng, G., Chen, X., & Pang, Y. (2018) · Sensors · doi:10.3390/s18051523 · Cited by 109
Wang, H., & Chen, P. (2010) · Computers & Industrial Engineering · doi:10.1016/j.cie.2010.12.004 · Cited by 98
Self-citationPandya, D. H., Upadhyay, S. H., & Harsha, S. P. (2013) · Soft Computing · doi:10.1007/s00500-013-1055-1 · Cited by 96
Guillén, A., Márquez, A. C., Fernández, J. F. G., & Sanz, M. D. (2016) · Computers in Industry · doi:10.1016/j.compind.2016.07.003 · Cited by 93
A three-dimensional geometric features-based SCA algorithm for compound faults diagnosis
Hao, Y., Song, L., Cui, L., & Wang, H. (2018) · Measurement · doi:10.1016/j.measurement.2018.10.098 · Cited by 73
Self-citationSadiku, M. N. O., Wang, Y., Cui, S., & Musa, S. M. (2017) · International Journal of Advances in Scientific Research and Engineering · doi:10.7324/ijasre.2017.32538 · Cited by 67
Fuzzy Diagnosis Method for Rotating Machinery in Variable Rotating Speed
Wang, H., & Chen, P. (2010) · IEEE Sensors Journal · doi:10.1109/jsen.2010.2049103 · Cited by 62
Self-citationBelaud, J., Negny, S., Dupros, F., David Michéa, B., & Vautrin, B. (2014) · Computers in Industry · doi:10.1016/j.compind.2014.01.009 · Cited by 57
Regrouping particle swarm optimization based variable neural network for gearbox fault diagnosis
Liao, Y., Zhang, L., & Li, W. (2018) · Journal of Intelligent & Fuzzy Systems · doi:10.3233/jifs-169542 · Cited by 40
Automatic visual inspection: An approach with multi-instance learning
Mera, C., Orozco‐Alzate, M., Branch, J. W., & Mery, D. (2016) · Computers in Industry · doi:10.1016/j.compind.2016.09.002 · Cited by 35
Study on signal recognition and diagnosis for spacecraft based on deep learning method
Li, K., & Wang, Q. (2015) · Prognostics and System Health Management Conference · doi:10.1109/phm.2015.7380040 · Cited by 27
A Sparsity-Promoted Method Based on Majorization-Minimization for Weak Fault Feature Enhancement
Ren, B., Hao, Y., Wang, H., Song, L., Tang, G., & Yuan, H. (2018) · Sensors · doi:10.3390/s18041003 · Cited by 23
Self-citationLearning on the Edge: Explicit Boundary Handling in CNNsPreprint
Innamorati, C., Ritschel, T., Weyrich, T., et al. (2018) · arXiv (Cornell University) · doi:10.48550/arxiv.1805.03106 · Cited by 14
Cited by
A review of the application of deep learning in intelligent fault diagnosis of rotating machinery
Zhu, Z., Lei, Y., Qi, G., Chai, Y., Mazur, N., An, Y., & Huang, X. (2023) · Measurement · doi:10.1016/j.measurement.2022.112346 · Cited by 731
WaveletKernelNet: An Interpretable Deep Neural Network for Industrial Intelligent Diagnosis
Li, T., Zhao, Z., Sun, C., Cheng, L., Chen, X., Yan, R., & Gao, R. X. (2022) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2020.3048950 · Cited by 618
Deep Learning for Anomaly Detection in Time-Series Data: Review, Analysis, and Guidelines
Choi, K., Yi, J., Park, C., & Yoon, S. (2021) · IEEE Access · doi:10.1109/access.2021.3107975 · Cited by 588
A comprehensive review on convolutional neural network in machine fault diagnosis
Jiao, J., Zhao, M., Lin, J., & Liang, K. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.07.088 · Cited by 575
Deep learning fault diagnosis method based on global optimization GAN for unbalanced data
Zhou, F., Yang, S., Fujita, H., Chen, D., & Wen, C. (2020) · Knowledge-Based Systems · doi:10.1016/j.knosys.2019.07.008 · Cited by 568
Metadata
- Authors
- Wang, H., Li, S., Song, L., & Cui, L.
- Venue
- Computers in Industry
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 105
- Pages
- 182-190
- ISSN
- 0166-3615 (ISSN-L)
- OpenAlex
- W2906256948
- Cited by
- 338
- References
- 38
- FWCI
- 25.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.