The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Creep and dynamic mechanical behavior of PP–jute composites: Effect of the interfacial adhesion
Open accessAbstract
The dynamic mechanical response and the short term creep-recovery behavior of composites made from bi-directional jute fabrics and polypropylene were studied. In order to improve the compatibility of the polar fibers and the non-polar matrix, two alternatives were compared: the addition of coupling agents and the chemical modification of the fibers. In the first case, two commercial maleated polypropylenes and lignin, a natural polymer, were used. In the second approach, the fibers were esterified using a commercial alkenyl succinic anhydride. The degree of interfacial adhesion was inferred from the measured properties and confirmed by the observation of the composite fractured surface. The maleated polypropylenes acted as compatibilizers since they were able to join the fibers to the neat PP, locating themselves in the interphase region. On the other hand, a clear separation between fibers and matrix could be observed when lignin was used as compatibilizing agent and when the chemically modified fibers were used to prepare the composite. The creep deformation could be directly related to the interfacial properties. Burgers model parameters were calculated from the creep part of the curves, and the recovery part was modeled using these values. A very good agreement between experimental data and theoretical curves were obtained in the creep region, although small discrepancies were found in the recovery part. The feasibility of the construction of a master curve (using the time–temperature principle) to predict long term creep behavior of the composites was investigated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Introduction to Physical Polymer Science
Sperling, L. H. (2005) · doi:10.1002/0471757128 · Cited by 2,917
Cited by
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Gholampour, A., & Ozbakkaloglu, T. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-03990-y · Cited by 1,058
Suriani, M. J., Ilyas, R. A., Zuhri, M. Y. M., Khalina, A., Sultan, M. T. H., Sapuan, S. M., Ruzaidi, C. M., Wan, F. N., Zulkifli, F., Harussani, M. M., et al. (2021) · Polymers · doi:10.3390/polym13203514 · Cited by 285
Studies on durability of sustainable biobased composites: a review
Chang, B. P., Mohanty, A. K., & Misra, M. (2020) · RSC Advances · doi:10.1039/c9ra09554c · Cited by 270
Vegetal fibers in polymeric composites: a review
Pereira, P. H. F., Rosa, M. D. F., Cioffi, M. O. H., Benini, K. C. C. D. C., Milanese, A. C., Voorwald, H. J. C., & Mulinari, D. R. (2015) · Polímeros · doi:10.1590/0104-1428.1722 · Cited by 264
Kim, J. T., & Netravali, A. N. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.05.007 · Cited by 263
Creep behavior of starch-based nanocomposite films with cellulose nanofibrils
Li, M., Li, D., Wang, L.-J., & Adhikari, B. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.10.023 · Cited by 69
Metadata
- Authors
- Acha, B. A., Reboredo, M. M., & Marcovich, N. E.
- Venue
- Composites Part A: Applied Science and Manufacturing
- Publisher
- Elsevier BV
- Published
- 2007-06
- Volume
- 38
- Issue
- 6
- Pages
- 1507-1516
- ISSN
- 1359-835X (ISSN-L)
- OpenAlex
- W2028631192
- Cited by
- 212
- References
- 1
- FWCI
- 5.59
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.