The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Cellulose nanofiber network for moisture stable, strong and ductile biocomposites and increased epoxy curing rate
Open accessAbstract
Nanocomposites with high volume fractions (15–50 vol%) of nanofibrillated cellulose (NFC) were prepared by impregnation of a wet porous NFC network with acetone/epoxy/amine solution. Infrared spectroscopy studies revealed a significant increase in curing rate of epoxy (EP) in the presence of NFC. The NFC provided extremely efficient reinforcement (at 15 vol%: 3-fold increase in stiffness and strength to 5.9 GPa and 109 MPa, respectively), and ductility was preserved. Besides, the glass transition temperature increased with increasing NFC content (from 68 °C in neat epoxy to 86 °C in 50 vol% composite). Most interestingly, the moisture sorption values were low and even comparable to neat epoxy for the 15 vol% NFC/EP. This material did not change mechanical properties at increased relative humidity (90% RH). Thus, NFC/EP provides a unique combination of high strength, modulus, ductility, and moisture stability for a cellulose-based biocomposite. Effects from nanostructural and interfacial tailoring are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Nakagaito, A. N., & Yano, H. (2004) · Applied Physics A: Materials Science & Processing · doi:10.1007/s00339-003-2453-5 · Cited by 608
Nakagaito, A. N., & Yano, H. (2005) · Applied Physics A · doi:10.1007/s00339-003-2225-2 · Cited by 545
Surface modification of microfibrillated cellulose for epoxy composite applications
Lu, J., Askeland, P., & Drzal, L. T. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.028 · Cited by 492
Cited by
On the use of nanocellulose as reinforcement in polymer matrix composites
Lee, K.-Y., Aitomäki, Y., Berglund, L. A., Oksman, K., & Bismarck, A. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.08.032 · Cited by 819
Self-citationReview of the recent developments in cellulose nanocomposite processing
Oksman, K., Aitomäki, Y., Mathew, A. P., Siqueira, G., Zhou, Q., Butylina, S., Tanpichai, S., Zhou, X., & Hooshmand, S. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.041 · Cited by 712
Recent developments on nanocellulose reinforced polymer nanocomposites: A review
Kargarzadeh, H., Mariano, M., Huang, J., Lin, N., Ahmad, I., Dufresne, A., & Thomas, S. (2017) · Polymer · doi:10.1016/j.polymer.2017.09.043 · Cited by 673
Chakrabarty, A., & Teramoto, Y. (2018) · Polymers · doi:10.3390/polym10050517 · Cited by 302
The strength and stiffness of oriented wood and cellulose-fibre materials: A review
Jakob, M., Mahendran, A. R., Gindl-Altmutter, W., Bliem, P., Konnerth, J., Müller, U., & Veigel, S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100916 · Cited by 292
Metadata
- Authors
- Ansari, F., Galland, S., Johansson, M., Plummer, C. J. G., & Berglund, L. A.
- Venue
- Composites Part A: Applied Science and Manufacturing
- Publisher
- Elsevier BV
- Published
- 2014-08
- Volume
- 63
- Pages
- 35-44
- ISSN
- 1359-835X (ISSN-L)
- OpenAlex
- W2091685654
- Cited by
- 182
- References
- 4
- FWCI
- 5.95
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.