Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 197

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Micromechanics modeling of the electrical conductivity of carbon nanotube cement-matrix composites

Open access
García-Macías, Enrique, D'Alessandro, Antonella, Castro-Triguero, Rafael, Pérez-Mira, Domingo, Ubertini, Filippo·2017·Composites Part B: Engineering

Abstract

Abstract The incorporation of Carbon Nanotubes (CNTs) as nanoinclusions for the development of electrically conductive cement-based composites opens a vast range of possibilities for monitoring of concrete structures. A key issue for the design and optimization of these composites is the development of theoretical models capable of providing a quantitative prediction of their overall electrical conductivity. Experimental results have evidenced the strong influence of the waviness and dispersion of the nanotubes on the overall conductivity of these materials, what makes the consideration of these two phenomena essential for the development of realistic theoretical models. Nevertheless, both waviness and agglomeration have been often neglected in the literature or, when considered, have been reproduced with very simple modeling approaches not suitable to catch the complexity of the problem at hand. This paper presents an improved micromechanics model of the effective electrical conductivity of CNT cement-based nanocomposites based on enhanced approaches for reproducing waviness and non-uniform spatial distributions of the nanoinclusions. The two mechanisms that govern the electrical conductivity of these composites, electron hopping and conductive networks, are incorporated in the mixed micromechanics model. On the basis of scanning electron microscopy inspections, a helical waviness model and a two-parameter agglomeration approach are proposed. In order to assess the accuracy of the proposed analytical model, cement-based specimens have been manufactured and tested for providing data to use as the basis of comparison. In particular, specimens of cement pastes, mortars and concretes with different concentrations of Multi-Walled Carbon Nanotubes (MWCNTs) have been prepared. It is shown that the consideration of straight uniformly distributed nanotubes, as typically done in the literature, leads to an overestimation of the overall conductivity. On the contrary, it is highlighted that the wavy state of the fibers as well as their agglomeration in bundles play a crucial role in the conductivity of cement-based nanocomposites, which is demonstrated by achieving a good fit to the experimental data when using the proposed models for waviness and agglomeration. Overall, the paper highlights the physical mechanisms governing the overall electrical conductivity of cement-based composites with MWCNTs and provides a powerful analytical tool for their design.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.compositesb.2016.10.025

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 197

Metadata

Authors
García-Macías, E., D'Alessandro, A., Castro-Triguero, R., Pérez-Mira, D., & Ubertini, F.
Venue
Composites Part B: Engineering
Publisher
Elsevier BV
Published
2017-01
Volume
108
Pages
451-469
ISSN
1359-8368 (ISSN-L)
OpenAlex
W2532070581
Cited by
197
References
1
FWCI
9.07
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.