The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Improving flexural performance of ultra-high-performance concrete by rheology control of suspending mortar
Abstract
This study develops a rheology control method to improve steel fiber distribution and flexural performance of ultra-high-performance concrete (UHPC) by adjusting the rheological properties of the suspending mortar of UHPC before steel fibers are added. Correlations among the plastic viscosity of the suspending mortar, the resulting steel fiber distribution, and flexural properties of UHPC are established. This was done by changing the dosage of viscosity modified admixture (VMA) for investigated UHPC mixtures. The optimal plastic viscosity of the suspending mortar that allows for the optimized fiber distribution and flexural performance of UHPC is determined. The plastic viscosity is correlated with the mini V-funnel flow time, which provides a simple alternative to evaluate the plastic viscosity. For a UHPC mixture with 2% micro steel fibers, by volume, the optimal mini V-funnel flow time of suspending motar was determined to be 46 ± 2 s, which corresponded to the optimal plastic viscosity (53 ± 3 Pa s) that ensures the greatest fiber dispersion uniformity and flexural performance of UHPC. However, increasing the VMA dosage retarded the hydration kinetics and reduced the degree of hydration, compressive strength, and the bond properties of the fiber-matrix interface of UHPC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Barnes, H. A., Hutton, J. F., & Walters, K. (1989) · Cited by 2,219
Dealy, J. M., & Wissbrun, K. F. (1990) · Melt Rheology and Its Role in Plastics Processing · doi:10.1007/978-1-4615-9738-4_1 · Cited by 1,370
Kang, S.-T., & Kim, J.-K. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.009 · Cited by 410
Meng, W., & Khayat, K. H. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.069 · Cited by 397
Self-citationHannawi, K., Bian, H., Prince-Agbodjan, W., & Raghavan, B. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.09.059 · Cited by 369
Optimization and performance of cost-effective ultra-high performance concrete
Meng, W., Valipour, M., & Khayat, K. H. (2017) · Materials and Structures · doi:10.1617/s11527-016-0896-3 · Cited by 342
Self-citationKang, S. T., Lee, B. Y., Kim, J.-K., & Kim, Y. Y. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.11.057 · Cited by 313
Performance-based design of self-compacting fibre reinforced concrete
Grünewald, S. (2004) · Research Repository (Delft University of Technology) · Cited by 243
Gesoglu, M., Güneyisi, E., Muhyaddin, G. F., & Asaad, D. S. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.08.004 · Cited by 200
Abrishambaf, A., Barros, J. A. O., & Cunha, V. M. C. F. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.04.009 · Cited by 179
Behaviour of hybrid FRP–UHPC beams subjected to static flexural loading
El‐Hacha, R., & Chen, D. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.07.004 · Cited by 124
Correlation among Fresh State Behavior, Fiber Dispersion, and Toughness Properties of SFRCs
Ferrara, L., Park, Y.-D., & Shah, S. P. (2008) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2008)20:7(493 · Cited by 119
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Self-citationWu, Z., Shi, C., & Khayat, K. H. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107021 · Cited by 454
Self-citationMitigation techniques for autogenous shrinkage of ultra-high-performance concrete – A review
Yang, L., Shi, C., & Wu, Z. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107456 · Cited by 367
Utilization of fibers in ultra-high performance concrete: A review
Gong, J., Ma, Y., Fu, J., Hu, J., Ouyang, X., Zhang, Z., & Wang, H. (2022) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.109995 · Cited by 360
Meng, W., & Khayat, K. H. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002212 · Cited by 314
Self-citation
Metadata
- Authors
- Meng, W., & Khayat, K. H.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2017-05
- Volume
- 117
- Pages
- 26-34
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2588965367
- Cited by
- 301
- References
- 12
- FWCI
- 19.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.