The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
A review on properties of fresh and hardened geopolymer mortar
Abstract
Abstract Geopolymer mortar refers to the mortar manufactured with sand and geopolymer, which is composed by the base materials containing affluent aluminium and silicon that was activated by adopting alkaline solution to serve as a binder. The investigation of the properties and application of the geopolymer mortar has attracted more and more attention of the researchers and cement based industries because of its sustainability advantages. This study reviews the properties of the geopolymer mortars including fresh performance (workability, setting time, and temperature of fresh mortar), physical properties, mechanical properties (compressive strength, tensile strength, elastic properties, flexural performance, bonding behavior, and fracture behavior), durability properties (acid resistance, resistance to elevated temperature, frost resistance, water absorption, and shrinkage properties) and microstructure analysis. This study also reviews the properties of different types of geopolymer mortars prepared using various source materials as base materials. The current study results indicate that the geopolymer mortar has exhibited significant feasibility and application prospect to be used as an environmental friendly building material, which may be an appropriate replacement to the traditional cement mortar in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
On the Development of Fly Ash-Based Geopolymer Concrete
(2004) · ACI Materials Journal · doi:10.14359/13485 · Cited by 1,254
Workability and strength of coarse high calcium fly ash geopolymer
Chindaprasirt, P., Chareerat, T., & Sirivivatnanon, V. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.11.002 · Cited by 863
Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar
Duran Atiş, C., Bilim, C., Çelik, Ö., & Karahan, O. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.10.011 · Cited by 658
Görhan, G., & Kürklü, G. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.10.082 · Cited by 637
Workability and strength of lignite bottom ash geopolymer mortar
Sathonsaowaphak, A., Chindaprasirt, P., & Pimraksa, K. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.01.120 · Cited by 507
Engineering Properties of Alkali-Activated Fly Ash Concrete
(2006) · ACI Materials Journal · doi:10.14359/15261 · Cited by 476
Alkali activation of Australian slag cements
Bakharev, T., Sanjayan, J. G., & Cheng, Y.-B. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00170-7 · Cited by 474
Abdulkareem, O. A., Mustafa Al Bakri, A. M., Kamarudin, H., Khairul Nizar, I., & Saif, A. A. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.047 · Cited by 419
Development of geopolymer mortar under ambient temperature for in situ applications
Al-Majidi, M. H., Lampropoulos, A., Cundy, A., & Meikle, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.085 · Cited by 410
Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based Geopolymerization
Sindhunata, van Deventer, J. S. J., Lukey, G. C., & Xu, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051251p · Cited by 390
Effect of nano-silica on strength and durability of fly ash based geopolymer mortar
Adak, D., Sarkar, M., & Mandal, S. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.093 · Cited by 387
Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack
Sata, V., Sathonsaowaphak, A., & Chindaprasirt, P. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.01.010 · Cited by 363
Preparation and characterisation of fly ash based geopolymer mortars
Temuujin, J., van Riessen, A., & MacKenzie, K. J. D. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.04.012 · Cited by 354
Atiş, C. D., Görür, E. B., Karahan, O., Bilim, C., İlkentapar, S., & Luga, E. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.089 · Cited by 329
Van Jaarsveld, J. G. S., Van Deventer, J. S. J., & Schwartzman, A. (1999) · Minerals Engineering · doi:10.1016/s0892-6875(98)00121-6 · Cited by 326
Ranjbar, N., Mehrali, M., Alengaram, U. J., Metselaar, H. S. C., & Jumaat, M. Z. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.064 · Cited by 321
Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review
Sumesh, M., Alengaram, U. J., Jumaat, M. Z., Mo, K. H., & Alnahhal, M. F. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.206 · Cited by 315
Islam, A. B. M. S., Alengaram, U. J., Jumaat, M. Z., & Bashar, I. I. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.080 · Cited by 298
Zhang, H., Kodur, V. K. R., Wu, B., Cao, L., & Wang, F. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.01.043 · Cited by 288
Ranjbar, N., Mehrali, M., Behnia, A., Alengaram, U. J., & Jumaat, M. Z. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.03.037 · Cited by 263
High calcium fly ash geopolymer mortar containing Portland cement for use as repair material
Phoo-ngernkham, T., Sata, V., Hanjitsuwan, S., Ridtirud, C., Hatanaka, S., & Chindaprasirt, P. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.139 · Cited by 262
Sorptivity and acid resistance of ambient-cured geopolymer mortars containing nano-silica
Deb, P. S., Sarker, P. K., & Barbhuiya, S. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.06.017 · Cited by 256
Final Setting Time and Compressive Strength of Fly Ash and GGBS-Based Geopolymer Paste and Mortar
Rao, G. M., & Rao, T. D. G. (2015) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-015-1757-z · Cited by 222
Properties of inorganic polymer (geopolymer) mortars made of glass cullet
Cyr, M., Idir, R., & Poinot, T. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-6107-2 · Cited by 220
Pan, Z., Sanjayan, J. G., & Rangan, B. V. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3243-z · Cited by 215
Mechanical properties and durability of volcanic ash based geopolymer mortars
Yankwa Djobo, J. N., Elimbi, A., Kouamo Tchakouté, H., & Kumar, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.07.141 · Cited by 207
Effects of Alkaline Solution on Properties of the HCFA Geopolymer Mortars
Malkawi, A. B., Nuruddin, M. F., Fauzi, A., Almattarneh, H., & Mohammed, B. S. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.06.581 · Cited by 202
Characterization of alkali activated geopolymer mortar doped with MWCNT
Khater, H. M., & Abd el Gawaad, H. A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.121 · Cited by 187
Mechanical properties and setting time of ferrochrome slag based geopolymer paste and mortar
Karakoç, M. B., Türkmen, İ., Maraş, M. M., Kantarci, F., Demirboğa, R., & Uğur Toprak, M. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.09.021 · Cited by 186
Preparation of fly ash and rice husk ash geopolymer
Sata, V., & Chindaprasirt, P. (2009) · International Journal of Minerals Metallurgy and Materials · doi:10.1016/s1674-4799(10)60019-2 · Cited by 182
The Effect of Temperature and Duration of Curing on the Strength of Fly Ash Based Geopolymer Mortar
Adam, A. A., & Horianto, X. X. X. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.12.199 · Cited by 178
A novel method to produce dry geopolymer cement powder
Abdel-Gawwad, H. A., & Abo-El-Enein, S. A. (2016) · HBRC Journal · doi:10.1016/j.hbrcj.2014.06.008 · Cited by 176
Patankar, S. V., Ghugal, Y. M., & Jamkar, S. S. (2014) · Indian Journal of Materials Science · doi:10.1155/2014/938789 · Cited by 165
Kürklü, G. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.02.043 · Cited by 164
Bond strength of PCC pavement repairs using metakaolin-based geopolymer mortar
Alanazi, H., Yang, M., Zhang, D., & Gao, Z. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.10.009 · Cited by 150
Strength and Durability Performance of Alkali-Activated Rice Husk Ash Geopolymer Mortar
Kim, Y.-Y., Lee, B.-J., Saraswathy, V., & Kwon, S.-J. (2014) · The Scientific World JOURNAL · doi:10.1155/2014/209584 · Cited by 149
Influence of OPC replacement and manufacturing procedures on the properties of self-cured geopolymer
Suwan, T., & Fan, M. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.09.065 · Cited by 148
Hanjitsuwan, S., Phoo-ngernkham, T., & Damrongwiriyanupap, N. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.046 · Cited by 137
The properties of fly ash based geopolymer mortars made with dune sand
Chuah, S., Duan, W., Pan, Z., Hunter, E. R., Korayem, A. H., Zhao, X. L., Collins, F., & Sanjayan, J. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.12.070 · Cited by 131
Mechanical Properties and Microstructure of Class C Fly Ash-Based Geopolymer Paste and Mortar
Li, X., Ma, X., Zhang, S., & Zheng, E. (2013) · Materials · doi:10.3390/ma6041485 · Cited by 127
Tchakouté, H. K., Mbey, J. A., Elimbi, A., Diffo, B. B. K., & Njopwouo, D. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.08.003 · Cited by 122
Nazari, A., & Sanjayan, J. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.06.037 · Cited by 111
Anuja, N., & Prabavathy, S. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.12.079 · Cited by 102
Optimization of lightweight GGBFS and FA geopolymer mortars by response surface method
Mermerdaş, K., Alğın, Z., Oleiwi, S. M., & Nassani, D. E. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.050 · Cited by 102
Arellano-Aguilar, R., Burciaga-Díaz, O., Gorokhovsky, A. V., & Escalante-Garcia, J. I. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.10.023 · Cited by 100
Lee, N. K., Kim, E. M., & Lee, H. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.055 · Cited by 98
Yliniemi, J., Paiva, H., Ferreira, V. M., Tiainen, M. S., & Illikainen, M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.11.017 · Cited by 98
Alkali–silica reaction in metakaolin-based geopolymer mortar
Pouhet, R., & Cyr, M. (2014) · Materials and Structures · doi:10.1617/s11527-014-0445-x · Cited by 94
Influence of Curing on the Strength Development of Calcium-Containing Geopolymer Mortar
Li, X., Wang, Z., & Jiao, Z. (2013) · Materials · doi:10.3390/ma6115069 · Cited by 89
Phoo-ngernkham, T., Sata, V., Hanjitsuwan, S., Ridtirud, C., Hatanaka, S., & Chindaprasirt, P. (2015) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-015-1906-4 · Cited by 89
Mijarsh, M. J. A., Johari, M. A. M., & Ahmad, Z. A. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.02.007 · Cited by 85
Intermittent curing of fly ash geopolymer mortar
Helmy, A. I. I. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.007 · Cited by 71
Characterization of alkali activated geopolymer mortar doped with MWCNT
Khater, H. M. M., & Abdel‐Gawwad, H. A. (2015) · Epitoanyag-Journal of Silicate Based and Composite Materials · doi:10.14382/epitoanyag-jsbcm.2015.7 · Cited by 71
Adak, D., Sarkar, M., Maiti, M., Tamang, A., Mandal, S., & Chattopadhyay, B. (2015) · RSC Advances · doi:10.1039/c5ra12776a · Cited by 70
Clausi, M., Tarantino, S. C., Lorenza, M. L., Riccardi, M. P., Tedeschi, C., & Zema, M. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.08.009 · Cited by 70
A geopolymer mortar for wood and earth structures
Gouny, F., Fouchal, F., Maillard, P., & Rossignol, S. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.009 · Cited by 65
Strength and Density of Geopolymer Mortar Cured at Ambient Temperature for Use as Repair Material
Zailani, W. W. A., Abdullah, M. M. A. B., Razak, R. A., Zainol, M. R. R. M. A., & Tahir, M. F. M. (2016) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/133/1/012042 · Cited by 57
Mijarsh, M. J. A., Johari, M. A. M., & Ahmad, Z. A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.078 · Cited by 56
Mechanical and Durability Performance of Novel Self-activating Geopolymer Mortars
Cheah, C. B., Ken, P. W., & Ramli, M. B. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.01.374 · Cited by 53
Durability Performance of Fly Ash Based One-Part Geopolymer Mortars
Abdollahnejad, Z., Pacheco-Torgal, F., de Aguiar, J. L. B., & Jesus, C. M. G. (2014) · Key engineering materials · doi:10.4028/www.scientific.net/kem.634.113 · Cited by 49
Development of a mix design methodology for high‐performance geopolymer mortars
Ng, T. S., & Foster, S. J. (2013) · Structural Concrete · doi:10.1002/suco.201200018 · Cited by 48
Bhowmick, A., & Ghosh, S. (2012) · International Journal of Civil and Structural Engineering · Cited by 44
Cited by
Shehata, N., Mohamed, O. A., Sayed, E. T., Abdelkareem, M. A., & Olabi, A. G. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155577 · Cited by 371
Geopolymer-zeolite composites: A review
Rożek, P., Król, M., & Mozgawa, W. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.152 · Cited by 361
John, S. K., Nadir, Y., & Girija, K. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122443 · Cited by 290
Long-term durability properties of geopolymer concrete: An in-depth review
Amran, M., Al-Fakih, A., Chu, S. H., Fediuk, R., Haruna, S., Azevedo, A., & Vatin, N. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00661 · Cited by 280
Cao, R., Zhang, S., Banthia, N., Zhang, Y., & Zhang, Z. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.107840 · Cited by 254
Metadata
- Authors
- Zhang, P., Zheng, Y., Wang, K., & Zhang, J.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 152
- Pages
- 79-95
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2810102166
- Cited by
- 448
- References
- 63
- FWCI
- 31.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.