The DOI matches its Crossref record; 25 of the 26 references it cites were found in a registry or an index.
Prediction model on compressive strength of recycled aggregate concrete filled steel tube columns
Abstract
Abstract The design of composite members consisting of a tubular column and in-filled conventional concrete has been available and well-defined in the provisions. However, for steel tube members filled with recycled aggregate concrete, there aren't any other special requirements in the current provisions. In this study, the experimental test results are used to model and evaluate the ultimate strength of axially loaded recycled aggregate concrete filled steel tube columns. The test specimens has a length to diameter ratio ranging from 2.0 to 3.5, indicating that they are the stub column and not failing in overall buckling. The proposed model was derived based the technique of gene expression programming. The database utilized contains a total of 97 test results. The predictor variable employed to generate the model are outer diameter, thickness and yield strength of steel tube, length of the column, recycled coarse aggregate replacement ratio, and concrete compressive strength. The experimental data and associated analytical model are examined by four widely used design codes of ACI, Eurocode 4, AIJ, and DL/T. A sensitivity statistical analysis is further conducted to assess the contributions of each parameter affecting the axial capacity. The outcome indicates that the developed model gives reasonable predictions of the axial capacity of recycled aggregate concrete filled circular steel tube stub columns compared to the existing expressions.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Compared with ordinary concrete, recycled aggregate concrete (RAC) has shortcomings such as a lower elastic modulus and higher drying shrinkage, which often limit its application in load-bearing structures [3].”
From Investigation on the bond-slip behavior of recycled aggregate concrete-filled steel tube with studs (2025) · cites this paper as [3]
Citations
Cites
Genetic Programming: On the Programming of Computers by Means of Natural Selection
Koza, J. R. (1992) · Medical Entomology and Zoology · Cited by 13,082
Haupt, R. L., & Haupt, S. E. (2003) · Wiley eBooks · doi:10.1002/0471671746 · Cited by 4,246
Gene Expression Programming: a New Adaptive Algorithm for Solving Problems
Ferreira, C. (2001) · arXiv (Cornell University) · doi:10.48550/arxiv.cs/0102027 · Cited by 2,036
Gene Expression Programming in Problem Solving
Ferreira, C. (2002) · Soft Computing and Industry · doi:10.1007/978-1-4471-0123-9_54 · Cited by 605
Genetic Algorithms: Principles and Perspectives: A Guide to GA Theory
Reeves, C. R., & Rowe, J. E. (2002) · Thammasat University Digital Collections · Cited by 557
Wang, Y., Chen, J., & Geng, Y. (2015) · Engineering Structures · doi:10.1016/j.engstruct.2015.01.007 · Cited by 250
Mechanical properties of confined recycled aggregate concrete under axial compression
Xiao, J., Huang, Y., Yang, J., & Zhang, C. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.06.062 · Cited by 237
Survey of genetic algorithms and genetic programming
Koza, J. R. (2002) · Western Electronic Show and Convention (WESCON) · doi:10.1109/wescon.1995.485447 · Cited by 171
Yang, Y.-F., & Ma, G. (2013) · Thin-Walled Structures · doi:10.1016/j.tws.2013.01.017 · Cited by 171
Behaviour of recycled aggregate concrete filled stainless steel stub columns
Tam, V. W. Y., Wang, Z., & Tao, Z. (2013) · Materials and Structures · doi:10.1617/s11527-013-0061-1 · Cited by 155
Research works printed but not linked: 1
- Punching, 2001, Of structural concrete slabs, Fib Bulletin, 12
Cited by
Farooq, F., Amin, M. N., Khan, K., Sadiq, M. R., Javed, M. F., Aslam, F., & Alyousef, R. (2020) · Applied Sciences · doi:10.3390/app10207330 · Cited by 298
Aslam, F., Farooq, F., Amin, M. N., Khan, K., Waheed, A., Akbar, A., Javed, M. F., Alyousef, R., & Alabduljabbar, H. (2020) · Advances in Civil Engineering · doi:10.1155/2020/8850535 · Cited by 223
Wang, X., Fan, F., & Lai, J. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.126144 · Cited by 163
Tang, Z., Li, W., Tam, V. W. Y., & Luo, Z. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.107776 · Cited by 161
Khan, M. A., Zafar, A., Akbar, A., Javed, M. F., & Mosavi, A. H. (2021) · Materials · doi:10.3390/ma14051106 · Cited by 146
Javed, M. F., Farooq, F., Memon, S. A., Akbar, A., Khan, M. A., Aslam, F., Alyousef, R., Alabduljabbar, H., & Rehman, S. K. U. (2020) · Crystals · doi:10.3390/cryst10090741 · Cited by 128
Strength prediction of circular CFST columns through advanced machine learning methods
Hou, C., & Zhou, X. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104289 · Cited by 115
Strength criterion of recycled aggregate concrete under triaxial Compression: Model calibration
Li, B., Dai, S., Zhan, Y., Xu, J., Guo, X., Yang, Y., & Chen, Y. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.126201 · Cited by 74
Nazar, S., Yang, J., Ahmad, A., & Shah, S. F. A. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103964 · Cited by 74
Nazar, S., Yang, J., Ahmad, W., Javed, M. F., Alabduljabbar, H., & Deifalla, A. F. (2022) · Buildings · doi:10.3390/buildings12122160 · Cited by 72
Chen, L., Fakharian, P., Eidgahee, D. R., Haji, M., Arab, A. M. A., & Nouri, Y. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.107439 · Cited by 69
Tang, Z., Li, W., Tam, V. W. Y., & Yan, L. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.111246 · Cited by 68
Liu, J., Kong, X.-A., Wang, S., Peng, L., Wang, Q., Zhang, Y., & Bao, X. (2026) · Expert Systems with Applications · doi:10.1016/j.eswa.2026.132597 · Cited by 64
Liu, Z., Lu, Y., Li, S., Zong, S., & Yi, S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122724 · Cited by 56
Li, P., Khan, M. A., Galal, A. M., Awan, H. H., Zafar, A., Javed, M. F., Khan, M. I., Qayyum, S., Malik, M. Y., & Wang, F. (2022) · Chemical Physics Letters · doi:10.1016/j.cplett.2022.139478 · Cited by 55
Environmentally Friendly Concrete Compressive Strength Prediction Using Hybrid Machine Learning
Mansouri, E., Manfredi, M., & Hu, J. W. (2022) · Sustainability · doi:10.3390/su142012990 · Cited by 53
Nazar, S., Yang, J., Javed, M. F., Khan, K., Li, L., & Liu, Q. (2023) · Structures · doi:10.1016/j.istruc.2023.01.019 · Cited by 49
Zhang, F., Xia, J., Li, G., Guo, Z., Chang, H., & Wang, K. (2020) · Materials · doi:10.3390/ma13030795 · Cited by 47
Axial compressive performance of RAC-encased RACFST composite columns
Cai, M., Ke, X., & Su, Y. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.110393 · Cited by 45
Zhang, P., Mao, Y., Yuan, W., Zheng, J., Hu, S., & Wang, K. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109184 · Cited by 41
Zheng, Y., Xiao, Y., Wang, C., & Li, Y. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129823 · Cited by 40
Probabilistic models of concrete compressive strength and elastic modulus with rubber aggregates
Nocera, F., Wang, J., Faleschini, F., Demartino, C., & Gardoni, P. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.126145 · Cited by 39
Ke, X., Xu, D., & Cai, M. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.111227 · Cited by 39
Mansouri, I., Güneyisi, E. M., & Mosalam, K. M. (2020) · Engineering Structures · doi:10.1016/j.engstruct.2020.111563 · Cited by 39
Self-citationAl-Hashem, M. N., Amin, M. N., Raheel, M., Khan, K., Alkadhim, H. A., Imran, M., Ullah, S., & Iqbal, M. (2022) · Materials · doi:10.3390/ma15217713 · Cited by 35
Ngo, N.-T., Le, H. A., & Pham, T.-P.-T. (2021) · Neural Computing and Applications · doi:10.1007/s00521-020-05605-z · Cited by 34
Axial performance of GGBFS concrete filled steel tubes
Ahmad, S., Kumar, A. A., & Kumar, K. (2019) · Structures · doi:10.1016/j.istruc.2019.12.005 · Cited by 32
Wang, H., Wang, L., Li, L., Cheng, B., Zhang, Y., & Wei, Y. (2020) · Materials · doi:10.3390/ma13194291 · Cited by 31
Liu, R., Wu, J., Yan, G., Ye, J., & Wang, D. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.130013 · Cited by 31
Mi, R., Pan, G., & Kuang, T. C. (2021) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0003672 · Cited by 28
Ahmed, A. H. A., Jin, W., & Ali, M. A. H. (2022) · Journal of Advanced Concrete Technology · doi:10.3151/jact.20.404 · Cited by 26
Phan, T. (2023) · Asian Journal of Civil Engineering · doi:10.1007/s42107-023-00756-5 · Cited by 25
Research on the Bond Behavior of Preplaced Aggregate Concrete-Filled Steel Tube Columns
Lv, J., Zhou, T., Du, Q., Li, K., & Jin, L. (2020) · Materials · doi:10.3390/ma13020300 · Cited by 25
Güneyisi, E. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.130319 · Cited by 24
Self-citationXu, C.-Y., Han, L., & Hou, C. (2023) · Engineering Structures · doi:10.1016/j.engstruct.2023.116663 · Cited by 24
Dar, M. A., Subramanian, N., Anbarasu, M., Ghowsi, A. F., Arif, P. A., & Dar, A. R. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2021.108222 · Cited by 24
Hosseinzadeh, M., Dehestani, M., & Hosseinzadeh, A. (2023) · Structures · doi:10.1016/j.istruc.2023.105720 · Cited by 21
Nonlinear finite element analysis of double skin composite columns subjected to axial loading
İpek, S., & Güneyisi, E. M. (2020) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-020-0012-x · Cited by 21
Self-citationKashyzadeh, K. R., Ghorbani, S., & Forouzanmehr, M. (2020) · International Journal of Engineering · doi:10.5829/ije.2020.33.09c.12 · Cited by 18
Stress-strain behavior of ECC-GFRP spiral confined concrete cylinders
Li, P., Chen, Y., & Yuan, F. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.105473 · Cited by 17
Behaviour of rectangular concrete-filled steel tubular slender column with unequal wall thickness
Fu, G., Gong-yi, F., Yu, C., Li, S., Wang, F., & Yang, J. (2021) · Engineering Structures · doi:10.1016/j.engstruct.2021.112100 · Cited by 16
Liu, Z., Huang, D., Lu, Y., & Li, S. (2022) · Structural Concrete · doi:10.1002/suco.202100873 · Cited by 15
A Prediction Model for the Calculation of Effective Stiffness Ratios of Reinforced Concrete Columns
Das, S., Mansouri, I., Choudhury, S., Gandomi, A. H., & Hu, J. W. (2021) · Materials · doi:10.3390/ma14071792 · Cited by 15
Harith, I. K., AL-Rubaye, M. M., Abdulhadi, A. M., & Hussien, M. L. (2024) · Multiscale and Multidisciplinary Modeling Experiments and Design · doi:10.1007/s41939-024-00605-1 · Cited by 14
Ju, X., Wu, L., Liu, M., Jiang, H., Zhang, W., Li, G., Chen, X., & Fan, X. (2024) · Materials · doi:10.3390/ma17030706 · Cited by 13
Raheel, M., Iqbal, M., Khan, R., Alam, M., Azab, M., & Eldin, S. M. (2023) · Asian Journal of Civil Engineering · doi:10.1007/s42107-023-00573-w · Cited by 12
Dynamic fractures of concrete made of recycled aggregate or reinforced with fibres
Selyutina, N. S., & Smirnov, I. V. (2023) · Mechanics of Materials · doi:10.1016/j.mechmat.2023.104613 · Cited by 12
Creep modeling of composite materials based on improved gene expression programming
Tan, H. M., Yan, S., Zhu, S., & Wen, P. (2022) · Scientific Reports · doi:10.1038/s41598-022-26548-6 · Cited by 11
Xiamuxi, A., Aosimanjiang, A., & Yang, B. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.132486 · Cited by 11
Wu, F., Tang, F., Lu, R., & Cheng, M. (2023) · Scientific Reports · doi:10.1038/s41598-023-43463-6 · Cited by 11
Yuan, F., Li, H., & Li, H. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.139099 · Cited by 11
Hui, C., Li, Y., Li, K., Liu, C., Hai, R., & Li, C. (2022) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-022-00422-8 · Cited by 10
Hu, P., Aghajanirefah, H., Anvari, A., & Nehdi, M. L. (2023) · Buildings · doi:10.3390/buildings13020391 · Cited by 10
İpek, S., Degtyarev, V. V., Güneyisi, E. M., & Mansouri, I. (2022) · Structures · doi:10.1016/j.istruc.2022.10.060 · Cited by 8
Self-citationWang, J., Lu, R., & Cheng, M. (2023) · Scientific Reports · doi:10.1038/s41598-023-36576-5 · Cited by 8
Bayesian Regularization Backpropagation Neural Network for Glass Beams in Lateral–Torsional Buckling
Hussain, S., Bedon, C., Kumar, G., & Ahmed, Z. (2023) · Advances in Civil Engineering · doi:10.1155/2023/6619208 · Cited by 8
Ngo, N.-T., Le, H. A., Huynh, V. V., & Pham, T.-P.-T. (2021) · Engineering Journal · doi:10.4186/ej.2021.25.7.135 · Cited by 8
Hybrid-based Deep Belief Network Model for Cement Compressive Strength Prediction
Shaswat, K. (2021) · The Computer Journal · doi:10.1093/comjnl/bxaa197 · Cited by 8
Moradkhani, M. A., Hosseini, S. H., & Ahmadi, M. M. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.110434 · Cited by 7
Yan, G., Chen, S.-D., Xu, L. F., Wang, D., Liu, R., & Gao, X. (2025) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2025.109409 · Cited by 7
Influence of Nano SiO2 on Structural Behavior of Concrete in-Filled Steel Tube Columns
Vasanthi, P., & Selvan, S. S. (2020) · Silicon · doi:10.1007/s12633-020-00746-1 · Cited by 7
Qu, B. Y. (2023) · Structural Concrete · doi:10.1002/suco.202300611 · Cited by 7
Cyclic performance of recycled aggregate with ferronickel slag concrete-filled steel tube columns
Xu, L. F., Chen, J., Chen, H., Luo, C.-S., & Syed, H. B. (2024) · Structures · doi:10.1016/j.istruc.2024.105947 · Cited by 7
Ren, Q., Shen, Y., & Li, M. (2022) · Structures · doi:10.1016/j.istruc.2022.03.068 · Cited by 7
Wang, L., Liu, Q., Wu, B. Q., & Zhao, X. (2025) · Engineering Structures · doi:10.1016/j.engstruct.2025.120316 · Cited by 6
Khan, A. U., Javed, M. F., & Khan, M. (2025) · Innovative Infrastructure Solutions · doi:10.1007/s41062-025-01909-y · Cited by 5
Chen, P., Si, X., Zhang, D., Wang, Z., & Zhang, Q. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.133245 · Cited by 5
Meng, E., Yu, Y., Zhang, X., & Su, Y. (2020) · Structural Concrete · doi:10.1002/suco.202000254 · Cited by 5
Zhang, X., Luo, C., Wang, J., Kuang, X., & Huang, Y. (2023) · Sustainability · doi:10.3390/su151914351 · Cited by 5
Machine learning-based techniques for marine structures: A state-of-the-art review
Zhou, X., Hou, C., Yu, Y., & Zhou, Y. (2025) · Ocean · doi:10.26599/ocean.2025.9470005 · Cited by 4
Liu, Y., & Liang, Y. (2024) · Scientific Reports · doi:10.1038/s41598-024-58756-7 · Cited by 4
Study on Restoring Force Model of RACFST Frame Infilled with RHB Masonry Wall
Meng, E., Yu, Y., Jiang, Y., Liu, S., & Su, Y. (2022) · International Journal of Steel Structures · doi:10.1007/s13296-022-00593-3 · Cited by 4
Wang, Y., Sun, S., Zhang, L., & Jia, Y. (2023) · Materials · doi:10.3390/ma16186088 · Cited by 4
Behavior of GRAC-filled square steel tubular stub column under axial compression
Li, B., Zhen, C., Wu, F., Li, Y., Liu, Y., & Wang, S. (2025) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2025.109551 · Cited by 3
Wang, Y., Liang, J.-F., Wang, C., & Li, W. (2024) · PLoS ONE · doi:10.1371/journal.pone.0304797 · Cited by 3
Qiu, H., Lai, H., Liao, F., Lai, D., Xin, C., Chen, Y., & Shen, Y. (2024) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2024.e03473 · Cited by 3
Ngo, N.-T., Pham, T.-P.-T., Le, H. A., Nguyen, Q. T., Nguyen, T.-T.-N., & Huynh, V. V. (2021) · Tạp chí Khoa học Công nghệ Xây dựng (KHCNXD) - ĐHXDHN · doi:10.31814/stce.nuce2021-15(2)-10 · Cited by 3
Siddiq, B., Javed, M. F., Ali, H., & Alabduljabbar, H. (2025) · Proceedings of the Institution of Civil Engineers - Maritime Engineering · doi:10.1680/jmaen.25.00008 · Cited by 2
Bond behaviour of RACFST stub columns after exposure to high temperatures
Zou, W., Liang, J., Lin, S., & Wang, C. (2024) · Advances in Structural Engineering · doi:10.1177/13694332241310111 · Cited by 2
Investigation on the bond-slip behavior of recycled aggregate concrete-filled steel tube with studs
Cai, G., Sun, B., Zeng, S., Yang, P., & Zhang, J. (2025) · PLoS ONE · doi:10.1371/journal.pone.0325279 · Cited by 1
Lei, H., Nie, C., Xu, D., Zeng, M., & Chen, Y. (2024) · Buildings · doi:10.3390/buildings14113341 · Cited by 1
A Bibliometric Overview of Current States and Research Trends in Concrete-Filled Tube Columns
Ling, J. H., & Omoregie, A. I. (2025) · Journal of Civil Engineering · doi:10.12962/j20861206.v40i2.22784 · Cited by 1
Sun, Y., Hou, D., Shi, Y., Sun, Y., Meng, F., & Chen, D. (2025) · Buildings · doi:10.3390/buildings15142424 · Cited by 1
Ma, H., Zhang, G., Xie, Z., Wu, Y., & Zhao, Y. (2022) · Journal of Asian Architecture and Building Engineering · doi:10.1080/13467581.2022.2050914 · Cited by 1
Flexural Behavior Characteristics of Steel Tubes Filled with SFRCCs Incorporating Recycled Materials
Yun, H.-D., Park, W.-S., Jang, Y., & Kim, S.-W. (2023) · Materials · doi:10.3390/ma16051958
Ghatte, H. F. (2023) · Advances in library and information science (ALIS) book series · doi:10.4018/979-8-3693-2841-5.ch002
Abdelkhalik, A., Ahmed, T. E., Issa, M. S., & Elgawad, S. A. (2025) · Research Square · doi:10.21203/rs.3.rs-7240985/v1
Ma, H., Geng, L., Lai, Z., & Zhang, G. (2026) · Journal of Asian Architecture and Building Engineering · doi:10.1080/13467581.2026.2653283
Kassaye, R. A., Tabish, F., Mamaghani, I. H. P., & Godasu, R. (2026) · Journal of structural design and construction practice. · doi:10.1061/jsdccc.sceng-2033
Zhang, Z., Li, X., Wang, W., Xue, S., & Xue, Y. (2026) · Engineering Structures · doi:10.1016/j.engstruct.2026.122698
Kumar, K., Mishra, A. K., & Kumar, S. R. (2026) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-026-14650-z
Paul, S., Das, P., Ahmed, M. K., Chara, A. H., Kashem, A., Jamil, M. H., Ahmed, H. F., Haque, M. T., Naidu, R. S., Al-Shayeb, A., et al. (2026) · Research Square · doi:10.21203/rs.3.rs-10211251/v1
Zhang, H., Dai, H.-F., Cheng, J.-Y., Wang, Y.-Y., & Geng, Y. (2026) · Structures · doi:10.1016/j.istruc.2026.113073
Aslam, F., & Ahmad, F. (2026) · Scientific Reports · doi:10.1038/s41598-026-72533-8
Metadata
- Authors
- Nour, A. I., & Güneyisi, E. M.
- Affiliations
- Amoud University (SO)
- Gaziantep University (TR)
- Corresponding author
- Nour, Abdikarim Idiris
- ORCID
- Güneyisi, Esra Mete
- Venue
- Composites Part B Engineering
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 173
- Pages
- 106938
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2947325973
- Cited by
- 93
- References
- 26
- Citations by year
- 2026: 8 · 2025: 9 · 2024: 10 · 2023: 20 · 2022: 20 · 2021: 9 · 2020: 16 · 2019: 1
- FWCI
- 8.60
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Composites Part B Engineering (publishedVersion)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Load-Bearing Analysis
- Physical Sciences › Engineering › Building and Construction › Recycled Aggregate Concrete Performance
- Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete
- Keywords
- recycled aggregate concrete, concrete-filled steel tube columns, stub columns, axial compressive strength, gene expression programming, strength prediction model, recycled coarse aggregate replacement ratio, design code comparison, sensitivity analysis, circular steel tubes
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.