The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Investigation of mechanical properties and shrinkage of ultra-high performance concrete: Influence of steel fiber content and shape
Abstract
Abstract Use of steel fibers in ultra-high performance concrete (UHPC) plays a significant role in enhancing strength and toughness and restraining shrinkage. This paper investigates the effect of steel fiber content and shape on mechanical strength, toughness, and autogenous and drying shrinkage of UHPC. Three steel fiber shapes, including straight, corrugated, and hooked fibers, with volume fraction ranging from 0 to 3% were employed. Compressive, flexural, and fiber-matrix bond strengths were evaluated. A statistical quadratic model and the Composite Theory were employed to predict the flexural strength of UHPC. Test results indicated that the increase in fiber volume can enhance the compressive and flexural strengths of UHPC and reduce shrinkage. The optimum fiber content for strength and shrinkage was found at 2%, beyond which the strength was slightly increased and the shrinkage was slightly decreased. For a given fiber content, the use of hooked fibers was most efficient in improving fiber-matrix bond and flexural strengths and reducing shrinkage. The flexural strengths of UHPC made with various fiber contents and shapes can be predicted using the proposed quadratic model and the Composite Theory. The latter considers the primary parameters affecting performance, including bond strength, matrix properties, and fiber characteristics. Finally, several models were used to simulate autogenous shrinkage behavior of UHPC and optimal models were found.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The use of steel fibers in UHPC-filled steel tube (UHPC-FST) members can significantly improve the ductility, as well as compressive and flexural ultimate bearing capacity, of these members [19,20,21,22,23].”
From Bond-Slip Performances of Ultra-High Performance Concrete Steel Tube Columns Made of a Large-Diameter Steel Tube with Internally Welded Steel Bars (2023) · cites this paper as [23]
Citations
Cites
Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete
Wu, Z., Shi, C., He, W., & Wu, L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.028 · Cited by 865
Self-citationFracture mechanics of concrete
(1984) · International Journal of Cement Composites and Lightweight Concrete · doi:10.1016/0262-5075(84)90065-4 · Cited by 687
Internal curing by superabsorbent polymers in ultra-high performance concrete
Justs, J., Wyrzykowski, M., Bajare, D., & Lura, P. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.05.005 · Cited by 602
Toughness enhancement in steel fiber reinforced concrete through fiber hybridization
Banthia, N., & Sappakittipakorn, M. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.05.005 · Cited by 502
Yoo, D.-Y., Lee, J.-H., & Yoon, Y.-S. (2013) · Composite Structures · doi:10.1016/j.compstruct.2013.07.033 · Cited by 482
Hassan, A. M. T., Jones, S. W., & Mahmud, G. H. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.030 · Cited by 478
Yoo, D.-Y., Kim, S., Park, G.-J., Park, J.-J., & Kim, S.-W. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.04.069 · Cited by 447
Wu, Z., Shi, C., & Khayat, K. H. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.05.005 · Cited by 431
Self-citationWille, K., Naaman, A. E., El-Tawil, S., & Parra-Montesinos, G. J. (2012) · Materials and Structures · doi:10.1617/s11527-011-9767-0 · Cited by 428
Kang, S.-T., & Kim, J.-K. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.009 · Cited by 410
Research works printed but not linked: 2
- Wu, 2018, Multi-scale investigation of microstructure, fiber pullout behavior, and mechanical properties of ultra-high performance concrete with nano- CaCO3 particles, Cement Concr Compos, 86, 10.1016/j.cemconcomp.2017.11.014 · DOI · Paper page
- Kang, 2011, The relation between fiber orientation and tensile behavior in an ultra high performance fiber reinforced cementitious composites (UHPFRCC), Cement Concr Res, 41, 1001, 10.1016/j.cemconres.2011.05.009 · DOI · Paper page
Cited by
Items 201–300 of 461
Liang, S., Du, H., Liu, Y., Chen, Y., Liu, J., & Wei, Y. N. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129875 · Cited by 20
Meng, S., Shi, Z., Niu, Y., Zheng, H., & Xia, C. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131053 · Cited by 20
Self-sensing ultra-high performance concrete: a review
Guo, Y., Wang, D., Ashour, A. F., Ding, S., & Han, B. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/ad092d · Cited by 20
Jin, L., Xie, C., Yu, W., & Du, X. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109976 · Cited by 35
Experimental study on acoustic emission of steel fiber broken pebble recycled concrete
Nie, Q., Liu, H., Ma, T., & Cui, H. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.138942 · Cited by 20
Escalante-Tovar, J. D., García, J. A., & Gómez, J. A. F. (2025) · Journal of Composites Science · doi:10.3390/jcs9070333 · Cited by 19
Research on fiber reinforced concrete and its performance prediction method and mix design method
Zhao, C., Zhu, Z., Guo, Q., Zhan, Y., & Zhao, R. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.130033 · Cited by 19
Alshammari, T. O., Pilakoutas, K., & Guadagnini, M. (2023) · Materials · doi:10.3390/ma16020713 · Cited by 19
Li, H., Li, Y., Li, Y., Li, X., Pan, Y., & Liu, C. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.135381 · Cited by 19
Huang, D., Lin, C., Liu, Z., Lu, Y., & Li, S. (2024) · Structures · doi:10.1016/j.istruc.2024.106829 · Cited by 19
Liu, C., Zhang, X., Cheng, S., Li, S., Bao, M., & Qiao, L. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.110529 · Cited by 19
Alshahrani, A., Kulasegaram, S., & Kundu, A. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.139767 · Cited by 19
Xuan, M.-Y., Lin, R.-S., Han, Y., Zhang, G., Cheng, G., & Wang, X.-Y. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.142555 · Cited by 18
Luo, X., Zhang, S., Li, A., Zhang, C., & Zhang, Y. (2024) · Materials · doi:10.3390/ma17102418 · Cited by 18
Yang, K., Tang, Z., Li, W., Wu, H., Ma, G., Xiang, Y., Xie, Y., & Long, G. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109855 · Cited by 18
Zhang, H., Wu, Z., Liu, H., Hu, X., Tian, Z., & Shi, C. (2025) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2025.106285 · Cited by 17
Self-citationHassanshahi, O., Salati, M., Azimi, N., & Bakhshi, M. (2025) · Infrastructures · doi:10.3390/infrastructures10120321 · Cited by 17
Hassanshahi, O., Karımzadeh, S., Bakhshi, M., & Azimi, N. (2025) · Buildings · doi:10.3390/buildings15234279 · Cited by 17
An overview of progressive advancement in ultra-high performance concrete with steel fibers
Alkadhim, H. A., Amin, M. N., Ahmad, W., Khan, K., Umbreen-us-Sahar, Al-Hashem, M. N., & Mohamed, A. (2022) · Frontiers in Materials · doi:10.3389/fmats.2022.1091867 · Cited by 17
Cracking and yield behavior of reinforced UHPC beams containing steel slag under flexural test
Sun, G., Shi, J. L., & Qu, Y. (2023) · Engineering Structures · doi:10.1016/j.engstruct.2023.115693 · Cited by 17
Yu, R., Wang, Z., Sun, M., Yu, Z., Dong, E., & Fan, D. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131242 · Cited by 17
Chen, Z., Wang, X., Ding, L., Niu, F., Jiang, K., Wang, H., & Wu, Z. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.108382 · Cited by 17
Self-citationEnhancing time-dependent performance of internally cured self-compacting lightweight concrete
Choi, J.-S., Yoo, D., Lee, J.-H., Banthia, N., & Yoon, Y. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.110328 · Cited by 17
Xie, Y., She, Y., Huang, J., He, J., & Zhou, L. (2024) · Structures · doi:10.1016/j.istruc.2024.107415 · Cited by 17
Eltantawi, I., Sheikh, M. N., & Hadi, M. N. S. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.140092 · Cited by 17
Fibre pullout behaviour of fibre-reinforced UHPC with TPE-coated fibres
Schleiting, M., Klier, K., Wiemer, N., Wetzel, A., Zarges, J., Heim, H., & Middendorf, B. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.131043 · Cited by 17
Luo, B., Wang, D., & Elchalakani, M. (2022) · Buildings · doi:10.3390/buildings12101621 · Cited by 16
Abubakr, A., & Soliman, A. (2023) · Materials · doi:10.3390/ma16114096 · Cited by 16
Flexural behavior of steel-UHPC composite beams with different connectors in negative moment
Sun, G., Shan, B., Kang, J., & Zhou, G. (2024) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2024.108617 · Cited by 16
Huang, Y., & Yao, G. (2024) · Buildings · doi:10.3390/buildings14051212 · Cited by 16
Çelik, A. İ., Karalar, M., Aksoylu, C., Mydin, M. A. O., Althaqafi, E., Yılmaz, F., Umiye, O. A., & Özkılıç, Y. O. (2024) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2024.e03890 · Cited by 27
Zhao, S., Yang, Y., Liu, J., & Liu, R. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.138945 · Cited by 16
The effect of metallic and non-metallic fiber on the mechanical properties of waste ceramic concrete
Najm, H. M., & Ahmad, S. (2021) · Innovative Infrastructure Solutions · doi:10.1007/s41062-021-00571-4 · Cited by 16
Zou, D., Wang, D., Zhang, S., & Li, H. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.126727 · Cited by 16
Xi, Y.-F., Lee, J., Chen, B.-L., Yang, B., Yu, M.-Z., Yan, X.-Z., & Zhu, L. (2023) · Buildings · doi:10.3390/buildings13030717 · Cited by 16
Jiao, Y., Wang, J., Xu, Q., Qi, J., & Yao, Y. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.141236 · Cited by 15
Electrical properties of ultra-high-performance concrete with various reinforcing fibers
Qin, H. X., Ding, S., Qiu, L., & Han, B. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/ad128f · Cited by 15
Abbas, M. A. A. M., Ran, X., Musleh, A. A., & Li, P. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.140543 · Cited by 17
Čepčianska, J., Palou, M. T., Czirák, P., Slaný, M., Matejdes, M., & Žemlička, M. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.105324 · Cited by 15
Yang, S., Chen, Z., Lan, T., & Yang, T. (2025) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2025.106110 · Cited by 15
Influence of Fiber Shape and Volume Content on the Performance of Reactive Powder Concrete (RPC)
Wang, C., Xue, G., & Zhao, X. (2021) · Buildings · doi:10.3390/buildings11070286 · Cited by 15
Liu, Z., Huang, D., Lu, Y., & Li, S. (2022) · Structural Concrete · doi:10.1002/suco.202100873 · Cited by 15
Deng, N., Zhao, H., Yao, D., & Tang, Z. (2023) · Materials · doi:10.3390/ma16103836 · Cited by 14
Li, M., Li, P., Qi, G., Li, S., Chen, R., Lv, S., Ding, Y., & Li, C. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.136668 · Cited by 14
Xiong, Y., Yang, M. J., Yuan, Y., Liu, Y., Zhao, J., & Shi, H. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109854 · Cited by 14
Yildizel, S. A., Acik, M., Kaplan, G., & Bayraktar, O. Y. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.137807 · Cited by 14
Zia, A., Hollý, I., & Zhang, P. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.110522 · Cited by 14
Shen, C., Tang, D., Wang, P., Lyu, Z., Zhang, M., Liu, B., Yang, C., & Yu, L. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.139350 · Cited by 14
Mirzaaghabeik, H., Shukla, S. K., & Mashaan, N. S. (2025) · Structures · doi:10.1016/j.istruc.2025.109038 · Cited by 14
Hongthong, R., Tadang, C., Tangchirapat, W., & Jaturapitakkul, C. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.105448 · Cited by 14
Axial compressive strength of slender UHPFRC-filled steel tubes
Haidar, A., Jawdhari, A., & Fam, A. Z. (2023) · Engineering Structures · doi:10.1016/j.engstruct.2023.116073 · Cited by 14
Rady, M., & Soliman, A. (2023) · Fibers · doi:10.3390/fib11110094 · Cited by 13
Mesoscale modeling of flexural fracture behavior in steel fiber reinforced concrete
Yu, Y., Xu, J., Chen, W., & Wu, B. (2024) · Advances in Structural Engineering · doi:10.1177/13694332241226921 · Cited by 13
Experimental and analytical studies on direct shear performance of UHPC keyed joints
Cao, J., Wu, F., Fan, X., Lei, S., Liu, L., Wang, X., & Peng, K. (2024) · Engineering Structures · doi:10.1016/j.engstruct.2024.118209 · Cited by 13
Zhang, W., Lv, X. C., Tian, J., Liu, H. B., Wu, X., Tang, S., Lei, N., Wang, Y., & Huang, W. (2025) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2025.103039 · Cited by 13
Zeng, Z., Li, C., Chen, Z., & Ke, L. (2022) · Advances in Materials Science and Engineering · doi:10.1155/2022/4181638 · Cited by 13
Yuan, S., Tong, T., Liu, Z., & Yang, P. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104802 · Cited by 13
Efficient, Fine-Grained Fly Ash Concrete Based on Metal and Basalt Fibers
Dvorkin, L. I., Konkol, J., Marchuk, V., & Huts, A. (2023) · Materials · doi:10.3390/ma16113969 · Cited by 13
Das, N., Ramagiri, B., & Nanthagopalan, P. (2023) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-15614 · Cited by 13
Luan, C., Zhang, Q., Wu, Z., Han, Z., Zhou, Z., Du, P., Wu, F., & Huang, Y. (2023) · Journal of Sustainable Cement-Based Materials · doi:10.1080/21650373.2023.2222398 · Cited by 14
Self-citationAn Overview on the Dispersion of Steel Fiber in Ultra-High-Performance Concrete
Dong, E., Fan, D., Ma, X., & You, P. (2023) · Journal of Testing and Evaluation · doi:10.1520/jte20230091 · Cited by 13
Pan, Z., Ding, X., Xie, P., & Sanjayan, J. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.133906 · Cited by 13
Feng, S. D., Lyu, J., Xiao, H., Zhang, Q., & Li, Y. (2024) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2024.105552 · Cited by 12
Chen, Z., Wang, X., Ding, L., Jiang, K., Niu, F., Wang, H., & Wu, Z. (2025) · Engineering Structures · doi:10.1016/j.engstruct.2025.120044 · Cited by 12
Self-citationZhang, Y., Zhao, J., Feng, H., & Xin, H. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.143726 · Cited by 12
Du, J., Zhang, F., Xiao, H., & Poh, L. H. (2026) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2026.106494 · Cited by 12
Investigation of Alkali-Silica Reactivity in Sustainable Ultrahigh Performance Concrete
Abbas, S., Abbass, W., Nehdi, M. L., Ahmed, A., & Yousaf, M. (2021) · Sustainability · doi:10.3390/su13105680 · Cited by 12
Shi, H., Lei, T., & Chen, T. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.111115 · Cited by 11
Xiong, Y., Yang, M. J., Zhou, Y., Wang, Z., Yuan, Y., & Zhang, Y. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.139010 · Cited by 11
Wani, S. R., & Suthar, M. (2024) · Asian Journal of Civil Engineering · doi:10.1007/s42107-024-01195-6 · Cited by 11
Khan, M. A., & Khan, Q. U. Z. (2025) · Materials Research Express · doi:10.1088/2053-1591/adb37d · Cited by 11
Lin, P., Yan, W., Zhao, H., & Ma, J. (2023) · Materials · doi:10.3390/ma16020879 · Cited by 11
You, X. M., Xu, Y. B., FAN, Y. C., Zou, Q.-Q., & Fu, B. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.110003 · Cited by 11
A cracked-hinge approach to modelling high performance fiber-reinforced concrete
Martinelli, E., Pepe, M., Penna, R., & Feo, L. (2021) · Composite Structures · doi:10.1016/j.compstruct.2021.114277 · Cited by 11
Ali, S. H., Abid, S. R., Al‐Lami, K., Calabrese, A. S., Yosri, A. M., & Al-Gasham, T. S. (2023) · Buildings · doi:10.3390/buildings13030678 · Cited by 11
Zhao, S., Liu, J., & Liu, R. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109706 · Cited by 10
Development of a novel DNA-shaped steel fiber and its performance on fresh and hardened concrete
Malathy, R., Ayyasamy, M., Prabakaran, M., & Kim, I. S. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.138689 · Cited by 10
Zou, Q.-Q., Yang, J.-H., Xu, G., You, X. M., Fu, B., & Kuang, Y. (2024) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2024.139289 · Cited by 10
Zaid, O., Abdullah, M. J., Al-Dala’ien, R. N., Ahmed, M., & Anas, S. M. (2025) · Discover Sustainability · doi:10.1007/s43621-025-02442-9 · Cited by 10
Zheng, W., Amin, M. N., Khan, K., Sufian, M., & Deifalla, A. F. (2023) · REVIEWS ON ADVANCED MATERIALS SCIENCE · doi:10.1515/rams-2022-0310 · Cited by 10
Shrinkage behaviour of high-strength concrete plates reinforced with carbon textile reinforcement
Dhahir, M. K., & Marx, S. (2024) · Structures · doi:10.1016/j.istruc.2024.107504 · Cited by 10
Yu, X., Chen, C., Xie, J., Dong, S., Dai, K., Lin, Y., & Liu, K. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.111518 · Cited by 10
Soares, P. R. R., Maciel, P. D. S., Barreto, R. R., Neto, J. T. D. S., Corrêa, E. C. S., & Bezerra, A. C. D. S. (2019) · Materials · doi:10.3390/ma12203297 · Cited by 10
Guo, W., Chen, B., Yang, Y. B., Xia, Y., Xiao, Q., Liu, S., & Wang, H. (2024) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-17429 · Cited by 10
Deng, H., Shi, K., Wu, J., Cai, X., Li, Q., & Duan, X. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.141699 · Cited by 9
Liu, Z., Chen, B., & Meng, X. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.113095 · Cited by 21
Weng, J.-R., & Liao, W. (2024) · Frontiers in Materials · doi:10.3389/fmats.2024.1427230 · Cited by 9
Zhang, X., Yu, L. M., Wu, Y., Lai, H.-M., Wang, Y., & Chen, Z.-B. (2024) · Buildings · doi:10.3390/buildings14041094 · Cited by 9
Approaches to reduce cost and environmental impacts of UHPC production: A review
Zhao, X. L., Nematollahi, B., Chougan, M., & Xiao, J. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e04644 · Cited by 24
Li, T., Yan, Y., Xu, C., Han, X., Liu, Y., Qi, H., & Yang, M. (2023) · Materials · doi:10.3390/ma16103612 · Cited by 8
Yan, J., Zhang, Q., Liu, Y., Xu, Y., Shi, Z., Bai, F., & Huang, F. (2023) · Defence Technology · doi:10.1016/j.dt.2023.10.003 · Cited by 8
Tian, C., Wang, Y., Du, Y., Wang, Q., & Yang, Q. (2023) · Journal of Materials in Civil Engineering · doi:10.1061/jmcee7.mteng-16013 · Cited by 8
Mechanical anchorage system in retrofitting of RC slabs using CFRP rods and concrete jacket
Saeed, F. H., Hejazi, F., & Rashid, R. S. M. (2025) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-025-01127-4 · Cited by 8
Time-dependent properties of steam cured non-proprietary ultra high-performance concretes
Rai, B., & Wille, K. (2023) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2023.e02760 · Cited by 8
Evaluation of Concrete Structural Cracking Behavior Induced by Early Drying Shrinkage
Zhang, M., Lu, C., Min, Q., Wang, X., He, Y., Deng, G., & Wang, Y. (2025) · Materials · doi:10.3390/ma18020395 · Cited by 7
Zhang, Z., Wu, Y., Chen, M., Zhou, H., Dong, B., & Ma, C. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.143493 · Cited by 7
Si, X., Zhang, P., Wang, Z., Li, Q., Hou, P., Chen, H., Wang, L., Piqi, Z., Xie, N., & Cheng, X. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.143542 · Cited by 7
Liu, C., Peng, Y., Xiang, Y., Shumuye, E. D., Dong, B., Peng, Z., Mi, T., & Fang, G. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.145311 · Cited by 7
Xu, Y., Xu, T., Li, G., & Xie, T. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e04242 · Cited by 7
Optimal fiber mix and prediction model for compressive strength of hybrid fiber reinforced concrete
Gao, P., Xie, W., Ling, Y., & Xu, H. (2025) · PLoS ONE · doi:10.1371/journal.pone.0318713 · Cited by 7
Metadata
- Authors
- Wu, Z., Shi, C., & Khayat, K. H.
- Affiliations
- Hunan University (CN)
- Missouri University of Science and Technology (US)
- Corresponding author
- Shi, Caijun
- Khayat, Kamal Henri
- Venue
- Composites Part B Engineering
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 174
- Pages
- 107021
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2948047681
- Cited by
- 454
- References
- 49
- Citations by year
- 2026: 64 · 2025: 89 · 2024: 83 · 2023: 87 · 2022: 67 · 2021: 45 · 2020: 16 · 2019: 3
- FWCI
- 23.74
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Composites Part B Engineering (publishedVersion)
- Funders
- Ministry of Science and Technology (2018YFC0705400)
- National Science Foundation of China (U1305243)
- Energy Consortium Research Center of Missouri S&T (SMR-1406-09)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Innovative concrete reinforcement materials
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete Properties and Behavior
- Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete
- Keywords
- ultra-high performance concrete, steel fibers, fiber content, fiber shape, hooked fibers, autogenous shrinkage, drying shrinkage, compressive strength, flexural strength, fiber-matrix bond strength, composite theory, quadratic model, shrinkage prediction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.