The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Investigation of mechanical properties and shrinkage of ultra-high performance concrete: Influence of steel fiber content and shape
Abstract
Abstract Use of steel fibers in ultra-high performance concrete (UHPC) plays a significant role in enhancing strength and toughness and restraining shrinkage. This paper investigates the effect of steel fiber content and shape on mechanical strength, toughness, and autogenous and drying shrinkage of UHPC. Three steel fiber shapes, including straight, corrugated, and hooked fibers, with volume fraction ranging from 0 to 3% were employed. Compressive, flexural, and fiber-matrix bond strengths were evaluated. A statistical quadratic model and the Composite Theory were employed to predict the flexural strength of UHPC. Test results indicated that the increase in fiber volume can enhance the compressive and flexural strengths of UHPC and reduce shrinkage. The optimum fiber content for strength and shrinkage was found at 2%, beyond which the strength was slightly increased and the shrinkage was slightly decreased. For a given fiber content, the use of hooked fibers was most efficient in improving fiber-matrix bond and flexural strengths and reducing shrinkage. The flexural strengths of UHPC made with various fiber contents and shapes can be predicted using the proposed quadratic model and the Composite Theory. The latter considers the primary parameters affecting performance, including bond strength, matrix properties, and fiber characteristics. Finally, several models were used to simulate autogenous shrinkage behavior of UHPC and optimal models were found.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The use of steel fibers in UHPC-filled steel tube (UHPC-FST) members can significantly improve the ductility, as well as compressive and flexural ultimate bearing capacity, of these members [19,20,21,22,23].”
From Bond-Slip Performances of Ultra-High Performance Concrete Steel Tube Columns Made of a Large-Diameter Steel Tube with Internally Welded Steel Bars (2023) · cites this paper as [23]
Citations
Cites
Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete
Wu, Z., Shi, C., He, W., & Wu, L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.028 · Cited by 865
Self-citationFracture mechanics of concrete
(1984) · International Journal of Cement Composites and Lightweight Concrete · doi:10.1016/0262-5075(84)90065-4 · Cited by 687
Internal curing by superabsorbent polymers in ultra-high performance concrete
Justs, J., Wyrzykowski, M., Bajare, D., & Lura, P. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.05.005 · Cited by 602
Toughness enhancement in steel fiber reinforced concrete through fiber hybridization
Banthia, N., & Sappakittipakorn, M. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.05.005 · Cited by 502
Yoo, D.-Y., Lee, J.-H., & Yoon, Y.-S. (2013) · Composite Structures · doi:10.1016/j.compstruct.2013.07.033 · Cited by 482
Hassan, A. M. T., Jones, S. W., & Mahmud, G. H. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.030 · Cited by 478
Yoo, D.-Y., Kim, S., Park, G.-J., Park, J.-J., & Kim, S.-W. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.04.069 · Cited by 447
Wu, Z., Shi, C., & Khayat, K. H. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.05.005 · Cited by 431
Self-citationWille, K., Naaman, A. E., El-Tawil, S., & Parra-Montesinos, G. J. (2012) · Materials and Structures · doi:10.1617/s11527-011-9767-0 · Cited by 428
Kang, S.-T., & Kim, J.-K. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.009 · Cited by 410
Yoo, D.-Y., Shin, H.-O., Yang, J.-M., & Yoon, Y.-S. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.10.081 · Cited by 400
Yazıcı, H., Yardımcı, M. Y., Yiğiter, H., Aydın, S., & Türkel, S. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.07.005 · Cited by 342
Optimization and performance of cost-effective ultra-high performance concrete
Meng, W., Valipour, M., & Khayat, K. H. (2017) · Materials and Structures · doi:10.1617/s11527-016-0896-3 · Cited by 342
Self-citationBarnett, S. J., Lataste, J.-F., Parry, T., Millard, S. G., & Soutsos, M. N. (2009) · Materials and Structures · doi:10.1617/s11527-009-9562-3 · Cited by 335
Wu, Z., Khayat, K. H., & Shi, C. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.021 · Cited by 318
Self-citationWu, Z., Khayat, K. H., & Shi, C. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105786 · Cited by 317
Self-citationShrinkage Cracking of Fiber Reinforced Concrete
Grzybowski, M., & Shah, S. P. (1990) · ACI Materials Journal · doi:10.14359/1951 · Cited by 315
Meng, W., & Khayat, K. H. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.02.019 · Cited by 301
Self-citationYoo, D., Kim, S., Kim, J.-J., & Chun, B. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.02.058 · Cited by 282
Pullout Behavior of High-Strength Steel Fibers Embedded in Ultra-High-Performance Concrete
Wille, K., & Naaman, A. E. (2012) · ACI Materials Journal · doi:10.14359/51683923 · Cited by 270
Kang, S.-T., Choi, J.-I., Koh, K.-T., Lee, K. S., & Lee, B. Y. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.02.075 · Cited by 267
Microstructural investigation of innovative UHPC
Reda, M. M., Shrive, N. G., & Gillott, J. E. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00225-7 · Cited by 264
Flexural/Tensile‐Strength Ratio in Engineered Cementitious Composites
Maalej, M., & Li, V. C. (1994) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(1994)6:4(513 · Cited by 258
Preparation of C200 green reactive powder concrete and its static–dynamic behaviors
Yunsheng, Z., Wei, S., Sifeng, L., Chujie, J., & Jianzhong, L. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.06.008 · Cited by 254
Meng, W., & Khayat, K. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.018 · Cited by 241
Self-citationWu, Z., Shi, C., & Khayat, K. H. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.11.014 · Cited by 235
Self-citationAfroughsabet, V., Biolzi, L., & Monteiro, P. J. M. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.11.047 · Cited by 228
Effects of SAP on the properties and pore structure of high performance cement-based materials
Ma, X., Liu, J., Wu, Z., & Shi, C. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.11.090 · Cited by 222
Self-citationAbu-Lebdeh, T. M., Hamoush, S. A., Heard, W. F., & Zornig, B. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.06.059 · Cited by 205
Effect of drying conditions on autogenous shrinkage in ultra-high performance concrete at early-age
Soliman, A., & Nehdi, M. L. (2010) · Materials and Structures · doi:10.1617/s11527-010-9670-0 · Cited by 192
Soliman, A. M., & Nehdi, M. L. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.11.008 · Cited by 170
Yoo, D., Banthia, N., & Yoon, Y. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.09.005 · Cited by 169
Short-term tensile creep and shrinkage of ultra-high performance concrete
Garas, V. Y., Kahn, L. F., & Kurtis, K. E. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.01.002 · Cited by 161
Wille, K., & Naaman, A. E. (2013) · ACI Materials Journal · doi:10.14359/51685792 · Cited by 141
Behavior of Ultrahigh-Performance Concrete Confined by Fiber-Reinforced Polymers
Zohrevand, P., & Mirmiran, A. (2011) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000324 · Cited by 135
Effect of SCM and nano-particles on static and dynamic mechanical properties of UHPC
Wu, Z., Shi, C., Khayat, K. H., & Xie, L. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.126 · Cited by 127
Self-citationFunctionally-graded fiber-reinforced cement composite: Processing, microstructure, and properties
Shen, B., Hubler, M. H., Paulino, G. H., & Struble, L. J. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.02.002 · Cited by 125
Missemer, L., Ouedraogo, E., Malécot, Y., Clergue, C., & Rogat, D. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.10.005 · Cited by 115
Interfaces in Cementitious Composites
Maso, J. C. (1992) · CRC Press eBooks · doi:10.1201/9781482271256 · Cited by 112
Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
C09 Committee (2017) · ASTM Standards · doi:10.1520/c1856_c1856m-17 · Cited by 111
Valipour, M., & Khayat, K. H. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.191 · Cited by 105
Self-citationShrinkage Properties of Ultra-High Performance Concrete (UHPC)
Koh, K.-T., Ryu, G.-S., Kang, S.-T., Park, J., & Kim, S.-W. (2011) · Advanced Science Letters · doi:10.1166/asl.2011.1505 · Cited by 75
Fracture Mechanics of Concrete
Naus, D. J., Batson, G. B., & Lott, J. L. (1974) · Springer eBooks · doi:10.1007/978-1-4615-7014-1_2 · Cited by 66
Concrete Reinforced with Deformed Steel Fibers Part II: Toughness Characterization
Banthia, N. (1995) · ACI Materials Journal · doi:10.14359/9765 · Cited by 60
高強度真鍮メッキ直鋼繊維の引抜性状に対する超高性能コンクリートの影響 | 文献情報 | J-GLOBAL 科学技術総合リンクセンター
Kay, W., & Antoine, E. N. (2013) · ACI Materials Journal · Cited by 59
Yoo, D., Kim, M.-J., Kim, S., Ryu, G.-S., & Koh, K.-T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.126 · Cited by 41
Effect of different geometric polypropylene fibers on plastic shrinkage cracking of cement mortars
Ma, Y., Tan, M., & Wu, K. (2002) · Materials and Structures · doi:10.1007/bf02533585 · Cited by 28
Creep and Shrinkage of High-Performance Concrete
Dilger, W. H., & Wang, C. (2000) · doi:10.14359/9899 · Cited by 27
Interfaces in Cementitious Composites
(2004) · Routledge eBooks · doi:10.4324/9780203626382 · Cited by 10
Research works printed but not linked: 2
- Wu, 2018, Multi-scale investigation of microstructure, fiber pullout behavior, and mechanical properties of ultra-high performance concrete with nano- CaCO3 particles, Cement Concr Compos, 86, 10.1016/j.cemconcomp.2017.11.014 · DOI · Paper page
- Kang, 2011, The relation between fiber orientation and tensile behavior in an ultra high performance fiber reinforced cementitious composites (UHPFRCC), Cement Concr Res, 41, 1001, 10.1016/j.cemconres.2011.05.009 · DOI · Paper page
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Self-citationDurability of ultra-high performance concrete – A review
Li, J., Wu, Z., Shi, C., Yuan, Q., & Zhang, Z. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119296 · Cited by 680
Self-citationAmran, M., Huang, S.-S., Onaizi, A. M., Makul, N., Abdelgader, H. S., & Ozbakkaloglu, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129029 · Cited by 548
UHPC evolution, development, and utilization in construction: a review
Bajaber, M. A., & Hakeem, I. Y. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.12.051 · Cited by 447
Mitigation techniques for autogenous shrinkage of ultra-high-performance concrete – A review
Yang, L., Shi, C., & Wu, Z. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107456 · Cited by 367
Self-citation
Metadata
- Authors
- Wu, Z., Shi, C., & Khayat, K. H.
- Affiliations
- Hunan University (CN)
- Missouri University of Science and Technology (US)
- Corresponding author
- Shi, Caijun
- Khayat, Kamal Henri
- Venue
- Composites Part B Engineering
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 174
- Pages
- 107021
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2948047681
- Cited by
- 454
- References
- 49
- Citations by year
- 2026: 64 · 2025: 89 · 2024: 83 · 2023: 87 · 2022: 67 · 2021: 45 · 2020: 16 · 2019: 3
- FWCI
- 23.74
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Composites Part B Engineering (publishedVersion)
- Funders
- Ministry of Science and Technology (2018YFC0705400)
- National Science Foundation of China (U1305243)
- Energy Consortium Research Center of Missouri S&T (SMR-1406-09)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Innovative concrete reinforcement materials
- Physical Sciences › Engineering › Civil and Structural Engineering › Concrete Properties and Behavior
- Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete
- Keywords
- ultra-high performance concrete, steel fibers, fiber content, fiber shape, hooked fibers, autogenous shrinkage, drying shrinkage, compressive strength, flexural strength, fiber-matrix bond strength, composite theory, quadratic model, shrinkage prediction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.