The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Mitigation techniques for autogenous shrinkage of ultra-high-performance concrete – A review
Abstract
Abstract Ultra-high-performance concrete (UHPC) demonstrates relatively high autogenous shrinkage at early age due to the use of high binder content and low water-to-binder ratio of approximately 0.2. High shrinkage can result in potential cracking and eventually reduced strength and durability of concrete. Several approaches can be used to mitigate the autogenous shrinkage based on restraining mechanism. These include (1) control of hydration reaction; (2) addition of internal restraint; (3) reduction of the surface tension of pore solution; (4) formation of expansive products; and (5) replenishment of water through internal curing. This paper reviewed those mitigation techniques from the perspective of restraining mechanism and influential factors. Finally, the advantages and disadvantages of those techniques were compared. It is indicated that internal curing is the most straightforward and effective approach to reduce autogenous shrinkage of UHPC. The combination of two and/or more techniques can simultaneously exert their functions, and thus maximizing the restraining effectiveness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Interfacial Transition Zone (ITZ) Between Cement Paste and Aggregate in Concrete
Scrivener, K. L., Crumbie, A. K., & Laugesen, P. (2004) · Interface Science · doi:10.1023/b:ints.0000042339.92990.4c · Cited by 1,460
Flax fibre and its composites – A review
Yan, L., Chouw, N., & Jayaraman, K. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.08.014 · Cited by 1,454
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
Self-citationMechanical properties of ultra-high-performance fiber-reinforced concrete: A review
Yoo, D.-Y., & Banthia, N. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.08.001 · Cited by 1,008
A review on ultra high performance concrete: Part II. Hydration, microstructure and properties
Wang, D., Shi, C., Wu, Z., Xiao, J., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.095 · Cited by 924
Self-citationWater-entrained cement-based materials
Jensen, O. M., & Hansen, P. F. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00737-8 · Cited by 619
Internal curing by superabsorbent polymers in ultra-high performance concrete
Justs, J., Wyrzykowski, M., Bajare, D., & Lura, P. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.05.005 · Cited by 602
Wu, Z., Shi, C., & Khayat, K. H. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107021 · Cited by 454
Self-citationHydration and microstructure of ultra high performance concrete incorporating rice husk ash
Van Tuan, N., Ye, G., van Breugel, K., & Copuroglu, O. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.009 · Cited by 412
Mo, L., Deng, M., & Tang, M. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.09.025 · Cited by 386
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Sharma, R., Jang, J. G., & Bansal, P. P. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103314 · Cited by 181
Metadata
- Authors
- Yang, L., Shi, C., & Wu, Z.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 178
- Pages
- 107456
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2975432474
- Cited by
- 367
- References
- 50
- FWCI
- 18.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.