The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Mitigation techniques for autogenous shrinkage of ultra-high-performance concrete – A review
Abstract
Abstract Ultra-high-performance concrete (UHPC) demonstrates relatively high autogenous shrinkage at early age due to the use of high binder content and low water-to-binder ratio of approximately 0.2. High shrinkage can result in potential cracking and eventually reduced strength and durability of concrete. Several approaches can be used to mitigate the autogenous shrinkage based on restraining mechanism. These include (1) control of hydration reaction; (2) addition of internal restraint; (3) reduction of the surface tension of pore solution; (4) formation of expansive products; and (5) replenishment of water through internal curing. This paper reviewed those mitigation techniques from the perspective of restraining mechanism and influential factors. Finally, the advantages and disadvantages of those techniques were compared. It is indicated that internal curing is the most straightforward and effective approach to reduce autogenous shrinkage of UHPC. The combination of two and/or more techniques can simultaneously exert their functions, and thus maximizing the restraining effectiveness.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Interfacial Transition Zone (ITZ) Between Cement Paste and Aggregate in Concrete
Scrivener, K. L., Crumbie, A. K., & Laugesen, P. (2004) · Interface Science · doi:10.1023/b:ints.0000042339.92990.4c · Cited by 1,460
Flax fibre and its composites – A review
Yan, L., Chouw, N., & Jayaraman, K. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.08.014 · Cited by 1,454
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
Self-citationMechanical properties of ultra-high-performance fiber-reinforced concrete: A review
Yoo, D.-Y., & Banthia, N. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.08.001 · Cited by 1,008
A review on ultra high performance concrete: Part II. Hydration, microstructure and properties
Wang, D., Shi, C., Wu, Z., Xiao, J., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.095 · Cited by 924
Self-citationWater-entrained cement-based materials
Jensen, O. M., & Hansen, P. F. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00737-8 · Cited by 619
Internal curing by superabsorbent polymers in ultra-high performance concrete
Justs, J., Wyrzykowski, M., Bajare, D., & Lura, P. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.05.005 · Cited by 602
Wu, Z., Shi, C., & Khayat, K. H. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107021 · Cited by 454
Self-citationHydration and microstructure of ultra high performance concrete incorporating rice husk ash
Van Tuan, N., Ye, G., van Breugel, K., & Copuroglu, O. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.009 · Cited by 412
Mo, L., Deng, M., & Tang, M. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.09.025 · Cited by 386
Mitigation strategies for autogenous shrinkage cracking
Bentz, D. P., & Jensen, O. M. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(03)00045-3 · Cited by 377
Hannawi, K., Bian, H., Prince-Agbodjan, W., & Raghavan, B. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.09.059 · Cited by 369
Meng, W., & Khayat, K. H. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.01.001 · Cited by 366
The use of rice husk ash as reactive filler in ultra-high performance concrete
Kang, S.-H., Hong, S.-G., & Moon, J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.09.004 · Cited by 359
Sun, W., Chen, H., Luo, X., & Qian, H. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00479-8 · Cited by 323
Meng, W., & Khayat, K. H. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002212 · Cited by 314
Van, V.-T.-A., Rößler, C., Bui, D.-D., & Ludwig, H.-M. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.07.015 · Cited by 310
Shrinkage-reducing admixtures and early-age desiccation in cement pastes and mortars
Bentz, D. P., Geiker, M. R., & Hansen, K. K. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00519-1 · Cited by 302
Meng, W., & Khayat, K. H. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.02.019 · Cited by 301
Expansive admixtures (mainly ettringite)
Nagataki, S., & Gomi, H. (1998) · Cement and Concrete Composites · doi:10.1016/s0958-9465(97)00064-4 · Cited by 288
Xie, T., Fang, C., Mohamad Ali, M. S., & Visintin, P. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.05.009 · Cited by 279
Meng, W., & Khayat, K. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.018 · Cited by 241
Hanehara, S., Tomosawa, F., Kobayakawa, M., & HWANG, K. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00441-5 · Cited by 229
Natural zeolite and its application in concrete composite production
Tran, Y. T., Lee, J., Kumar, P., Kim, K.-H., & Lee, S. S. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.12.084 · Cited by 225
Effect of calcium on dissolution and precipitation reactions of amorphous silica at high alkalinity
Maraghechi, H., Rajabipour, F., Pantano, C. G., & Burgos, W. D. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.05.004 · Cited by 215
Molecular design of comb-shaped polycarboxylate dispersants for environmentally friendly concrete
Marchon, D., Sulser, U., Eberhardt, A., & Flatt, R. J. (2013) · Soft Matter · doi:10.1039/c3sm51030a · Cited by 195
Inclusion of nano metakaolin as additive in ultra high performance concrete (UHPC)
Muhd Norhasri, M. S., Hamidah, M. S., Mohd Fadzil, A., & Megawati, O. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.127 · Cited by 193
Effect of drying conditions on autogenous shrinkage in ultra-high performance concrete at early-age
Soliman, A., & Nehdi, M. L. (2010) · Materials and Structures · doi:10.1617/s11527-010-9670-0 · Cited by 192
Wang, X., Yu, R., Shui, Z., Song, Q., Liu, Z., bao, M., Liu, Z., & Wu, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.201 · Cited by 180
Soliman, A. M., & Nehdi, M. L. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.11.008 · Cited by 170
Application of shrinkage reducing admixture in concrete: A review
Zhan, P.-M., & He, Z.-H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.209 · Cited by 164
Liu, J., Shi, C., Farzadnia, N., & Ma, X. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.205 · Cited by 160
Self-citationInternal curing with lightweight aggregate produced from biomass-derived waste
Lura, P., Wyrzykowski, M., Tang, C., & Lehmann, E. H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.01.025 · Cited by 156
Liu, K., Yu, R., Shui, Z., Li, X., Guo, C., Yu, B., & Wu, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.089 · Cited by 147
Shrinkage and strength development of UHSC incorporating a hybrid system of SAP and SRA
Liu, J., Farzadnia, N., Shi, C., et al. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.12.029 · Cited by 143
Self-citationShen, P., Lü, L., He, Y., Rao, M., Fu, Z., Wang, F., & Hu, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.172 · Cited by 134
Liu, K., Yu, R., Shui, Z., Li, X., Ling, X., He, W., Yi, S., & Wu, S. (2018) · Materials · doi:10.3390/ma12010011 · Cited by 117
Standard Practice for Fabricating and Testing Specimens of Ultra-High Performance Concrete
C09 Committee (2017) · ASTM Standards · doi:10.1520/c1856_c1856m-17 · Cited by 111
Study on the rheological properties of Portland cement pastes with polycarboxylate superplasticizers
Kong, X., Zhang, Y., & Hou, S. (2013) · Rheologica Acta · doi:10.1007/s00397-013-0713-7 · Cited by 109
Polat, R., Demirboğa, R., & Karagöl, F. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.08.168 · Cited by 102
Inclusion of nano metaclayed as additive in ultra high performance concrete (UHPC)
Sidek, M. N. M., Hamidah, M. S., & Fadzil, A. M. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.006 · Cited by 99
The effect of SCMs and SAP on the autogenous shrinkage and hydration process of RPC
Liu, J., Ou, Z., Mo, J., Wang, Y., & Wu, H. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.08.061 · Cited by 93
The role of carbon nanotube on hydration kinetics and shrinkage of cement composite
Tafesse, M., & Kim, H.-K. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.04.004 · Cited by 91
Enhancing behavior of large volume underground concrete structure using expansive agents
Liu, F., Shen, S., Hou, D., et al. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.075 · Cited by 72
Factorial Design and Optimization of Ultra-High-Performance Concrete with Lightweight Sand
Meng, W., Samaranayake, V. A., & Khayat, K. H. (2017) · ACI Materials Journal · doi:10.14359/51700995 · Cited by 70
Song, Q., Yu, R., Wang, X., Rao, S., & Shui, Z. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.10.059 · Cited by 69
Ma, R., Guo, L., Ye, S., et al. (2019) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002650 · Cited by 61
Su, A., Qin, L., Zhang, S., et al. (2017) · Advances in Materials Science and Engineering · doi:10.1155/2017/6384859 · Cited by 48
la Varga, I. D., & Graybeal, B. A. (2014) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001212 · Cited by 44
Staquet, S., Espion, B., Schmidt, M., et al. (2004) · Dépôt institutionnel de l'Université libre de Bruxelles (Université Libre de Bruxelles) · Cited by 19
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Sharma, R., Jang, J. G., & Bansal, P. P. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103314 · Cited by 181
Metadata
- Authors
- Yang, L., Shi, C., & Wu, Z.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 178
- Pages
- 107456
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2975432474
- Cited by
- 367
- References
- 50
- FWCI
- 18.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.