The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Electrical conductivity of CNT/polymer composites: 3D printing, measurements and modeling
Open accessAbstract
We present electrical conductivity measurements and modeling aspects of carbon nanotube (CNT)/polymer composites enabled via fused filament fabrication (FFF) additive manufacturing (AM). CNT/polylactic acid (PLA) and CNT/high density polyethylene (HDPE) filament feedstocks were synthesized through melt blending with controlled CNT loading to realize 3D printed polymer nanocomposites. Electrical conductivity of 3D printed CNT/PLA and CNT/HDPE composites was measured for various CNT loadings. Low percolation thresholds were obtained from measured data as 0.23 vol. % and 0.18 vol. % of CNTs for CNT/PLA and CNT/HDPE nanocomposites, respectively. Moreover, a micromechanics-based two-parameter agglomeration model was developed to predict the electrical conductivity of CNT/polymer composites. We further show that the two agglomeration parameters can also be used to describe segregated structures, wherein nanofillers are constrained to certain locations within the matrix. To the best of our knowledge, this is the first ever electrical conductivity model to account for segregation of CNTs in the matrix. A good agreement between measured conductivity and predictions demonstrates the adequacy of the proposed model. We further evince the robustness of the model by accurately capturing the conductivity measurements reported in the literature for both elastomeric and thermoplastic nanocomposites. The findings of the study would provide guidelines for the design of electro-conductive polymer nanocomposites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Helical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
Carbon Nanotubes--the Route Toward Applications
Baughman, R. H., Zakhidov, A. A., & de Heer, W. A. (2002) · Science · doi:10.1126/science.1060928 · Cited by 10,267
Introduction to Percolation Theory
Stauffer, D., Aharony, A., & Redner, S. (1993) · Physics Today · doi:10.1063/1.2808877 · Cited by 6,666
Simmons, J. G. (1963) · Journal of Applied Physics · doi:10.1063/1.1702682 · Cited by 4,200
Polymer Nanocomposites Containing Carbon Nanotubes
Moniruzzaman, M., & Winey, K. I. (2006) · Macromolecules · doi:10.1021/ma060733p · Cited by 3,416
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
A review and analysis of electrical percolation in carbon nanotube polymer composites
Bauhofer, W., & Kovacs, J. Z. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.06.018 · Cited by 2,741
THOSTENSON, E., LI, C., & CHOU, T. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.11.003 · Cited by 1,734
An Introduction To Percolation Theory
Hughes, B. D. (1996) · Random Walks and Random Environments · doi:10.1093/oso/9780198537892.003.0002 · Cited by 1,731
A review of vapor grown carbon nanofiber/polymer conductive composites
Al-Saleh, M. H., & Sundararaj, U. (2009) · Carbon · doi:10.1016/j.carbon.2008.09.039 · Cited by 1,087
Tunneling effect in a polymer/carbon nanotube nanocomposite strain sensor
Hu, N., Karube, Y., Yan, C., Masuda, Z., & Fukunaga, H. (2008) · Acta Materialia · doi:10.1016/j.actamat.2008.02.030 · Cited by 990
Sensors and actuators based on carbon nanotubes and their composites: A review
Li, C., Thostenson, E. T., & Chou, T.-W. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.006 · Cited by 934
Conductive polymer composites with segregated structures
Pang, H., Xu, L., Yan, D.-X., & Li, Z.-M. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.07.007 · Cited by 802
Li, C., Thostenson, E. T., & Chou, T.-W. (2007) · Applied Physics Letters · doi:10.1063/1.2819690 · Cited by 704
Gnanasekaran, K., Heijmans, T., van Bennekom, S., Woldhuis, H., Wijnia, S., de With, G., & Friedrich, H. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.04.003 · Cited by 594
Carbon based conductive polymer composites
Zhang, W., Dehghani-Sanij, A. A., & Blackburn, R. S. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-1688-5 · Cited by 429
Du, J., Zhao, L., Zeng, Y., Zhang, L., Li, F., Liu, P., & Liu, C. (2011) · Carbon · doi:10.1016/j.carbon.2010.11.013 · Cited by 428
Feng, C., & Jiang, L. (2013) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.12.008 · Cited by 352
Osteoblast function on electrically conductive electrospun PLA/MWCNTs nanofibers
Shao, S., Zhou, S., Li, L., Li, J., Luo, C., Wang, J., Li, X., & Weng, J. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.051 · Cited by 320
Performance of biocompatible PEEK processed by fused deposition additive manufacturing
Arif, M. F., Kumar, S., Varadarajan, K. M., & Cantwell, W. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.015 · Cited by 296
Self-citationElectrical properties of polymer nanocomposites containing rod-like nanofillers
Mutiso, R. M., & Winey, K. I. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.06.002 · Cited by 288
Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices
Nadgorny, M., & Ameli, A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01786 · Cited by 244
Effect of nanotube waviness on the electrical conductivity of carbon nanotube-based composites
Li, C., Thostenson, E. T., & Chou, T.-W. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.10.056 · Cited by 208
Micromechanics modeling of the electrical conductivity of carbon nanotube cement-matrix composites
García-Macías, E., D'Alessandro, A., Castro-Triguero, R., Pérez-Mira, D., & Ubertini, F. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.10.025 · Cited by 197
García-Macías, E., D'Alessandro, A., Castro-Triguero, R., Pérez-Mira, D., & Ubertini, F. (2017) · Composite Structures · doi:10.1016/j.compstruct.2016.12.014 · Cited by 193
Yuan, S., Zheng, Y., Chua, C. K., Yan, Q., & Zhou, K. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.11.007 · Cited by 190
Recent Developments in Multifunctional Nanocomposites Using Carbon Nanotubes
Wernik, J. M., & Meguid, S. A. (2010) · Applied Mechanics Reviews · doi:10.1115/1.4003503 · Cited by 180
Strong, stretchable and ultrasensitive MWCNT/TPU nanocomposites for piezoresistive strain sensing
Kumar, S., Gupta, T. K., & Varadarajan, K. M. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107285 · Cited by 163
Self-citationZhao, H., & Bai, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01413 · Cited by 159
Carbon nanotube agglomeration effect on piezoresistivity of polymer nanocomposites
Gong, S., Zhu, Z. H., & Meguid, S. A. (2014) · Polymer · doi:10.1016/j.polymer.2014.08.054 · Cited by 153
Mechanical and electrical properties of multi-wall carbon nanotube/poly(lactic acid) composites
Kuan, C., Kuan, H., Ma, C.-C. M., & Chen, C. (2007) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2007.10.060 · Cited by 152
Sanli, A., Benchirouf, A., Müller, C., & Kanoun, O. (2016) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2016.12.011 · Cited by 134
Multi-scale numerical simulations on piezoresistivity of CNT/polymer nanocomposites
Hu, B., Hu, N., Li, Y., Akagi, K., Yuan, W., Watanabe, T., & Cai, Y. (2012) · Nanoscale Research Letters · doi:10.1186/1556-276x-7-402 · Cited by 121
Kumar, S., Wardle, B. L., & Arif, M. F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13038 · Cited by 91
Self-citationArif, M. F., Kumar, S., Gupta, T. K., & Varadarajan, K. M. (2018) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.07.021 · Cited by 88
Self-citationStrain and damage-sensing performance of biocompatible smart CNT/UHMWPE nanocomposites
Reddy, S. K., Kumar, S., Varadarajan, K. M., Marpu, P., Gupta, T. K., & Choosri, M. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.07.029 · Cited by 83
Self-citationStress Reduction of 3D Printed Compliance‐Tailored Multilayers
Kumar, S., Wardle, B. L., Arif, M. F., & Ubaid, J. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700883 · Cited by 66
Self-citationKhan, M. A., & Kumar, S. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.02.038 · Cited by 41
Self-citationLiljenhjerte, J., Upadhyaya, P., & Kumar, S. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.03.005 · Cited by 36
Self-citationPan, J., & Bian, L. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.121777 · Cited by 32
HDPE high density polyethylene
Wypych, G. (2012) · Elsevier eBooks · doi:10.1016/b978-1-895198-47-8.50052-7 · Cited by 8
Cited by
Kanoun, O., Bouhamed, A., Ramalingame, R., Bautista-Quijano, J. R., Rajendran, D., & Al-Hamry, A. (2021) · Sensors · doi:10.3390/s21020341 · Cited by 295
Zhang, C., Li, Y., Kang, W., Liu, X., & Wang, Q. (2021) · SusMat · doi:10.1002/sus2.11 · Cited by 256
Yanamandra, K., Chen, G. L., Xu, X., Mac, G., & Gupta, N. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108318 · Cited by 72
Metadata
- Authors
- Mora, A., Verma, P., & Kumar, S.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 183
- Pages
- 107600
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2990009619
- Cited by
- 294
- References
- 41
- FWCI
- 8.42
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.