The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Interpreting the early-age reaction process of alkali-activated slag by using combined embedded ultrasonic measurement, thermal analysis, XRD, FTIR and SEM
Abstract
In the present study, the early-age reaction process of alkali-activated slag (AAS) pastes was in-situ monitored by using embedded piezoelectric transducer based ultrasonic monitoring system. The effects of different types of activator (sodium hydroxide and sodium silicate) on reaction process, products and their microstructure evolution were investigated. The experimental results reveal that the early-age reaction process of AAS can be effectively in-situ observed by use of the ultrasonic method. It is found that the early-age reaction process of AAS pastes made with sodium silicate can be divided into five stages: (Ⅰ) dormant period, (Ⅱ) acceleration period, (Ⅲ) deceleration period, (Ⅳ) second acceleration period and (Ⅴ) second deceleration period. However, only three featured stages could be identified in those activated with sodium hydroxide. The soluble SiO44− ions in activator solution are critical to the formation process of reaction products and the microstructure evolution, especially for the former four stages. In specific, when activation is with sodium silicate, the increase of its modulus (Ms, molar ration of SiO2 to Na2O) leads to the improvement of reaction extent in stage Ⅰ, prolongs the reaction time of stage Ⅱ; meanwhile, the deceleration period of stage Ⅲ is shortened due to the advancement of stage Ⅳ.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
New cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Advances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
A model for the C-A-S-H gel formed in alkali-activated slag cements
Puertas, F., Palacios, M., Manzano, H., Dolado, J. S., Rico, A., & Rodríguez, J. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.04.036 · Cited by 898
Effect of alkalis on fresh C–S–H gels. FTIR analysis
García Lodeiro, I., Macphee, D. E., Palomo, A., & Fernández-Jiménez, A. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.01.003 · Cited by 827
Alkali activation of fly ash: Effect of the SiO2/Na2O ratio
Criado, M., Fernández-Jiménez, A., & Palomo, A. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.02.055 · Cited by 705
Sodium silicate-based, alkali-activated slag mortars
Brough, A. R., & Atkinson, A. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00717-2 · Cited by 694
(Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement
Lecomte, I., Henrist, C., Liégeois, M., Maseri, F., Rulmont, A., & Cloots, R. (2006) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.12.021 · Cited by 597
A review on properties of fresh and hardened geopolymer mortar
Zhang, P., Zheng, Y., Wang, K., & Zhang, J. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.06.031 · Cited by 448
Effects of dosage and modulus of water glass on early hydration of alkali–slag cements
Krizan, D., & Zivanovic, B. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00717-7 · Cited by 444
Effect of activator type and content on properties of alkali-activated slag mortars
Aydın, S., & Baradan, B. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.10.001 · Cited by 435
In Situ ATR-FTIR Study of the Early Stages of Fly Ash Geopolymer Gel Formation
Rees, C. A., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Langmuir · doi:10.1021/la701185g · Cited by 411
Puertas, F., Fernández-Jiménez, A., & Blanco-Varela, M. T. (2004) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00254-0 · Cited by 409
Very early-age reaction kinetics and microstructural development in alkali-activated slag
Gebregziabiher, B. S., Thomas, R., & Peethamparan, S. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.001 · Cited by 393
29Si and 27Al NMR study of alkali-activated slag
Wang, S.-D., & Scrivener, K. L. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)01044-x · Cited by 328
Concrete early-age strength monitoring using embedded piezoelectric transducers
Gu, H., Song, G., Dhonde, H., Mo, Y. L., & Yan, S. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/6/038 · Cited by 312
Zhang, Z., Zhu, Y., Yang, T., Li, L., Zhu, H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.09.147 · Cited by 302
Self-citationEffects of nano-TiO2 on strength, shrinkage and microstructure of alkali activated slag pastes
Yang, L. Y., Jia, Z. J., Zhang, Y. M., & Dai, J. G. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.11.009 · Cited by 267
Self-citationŽivica, V. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.07.002 · Cited by 262
Zhang, Z., Provis, J. L., Wang, H., et al. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.01.040 · Cited by 250
Self-citationLi, N., Shi, C., & Zhang, Z. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.04.024 · Cited by 249
Self-citationSetting of alkali-activated slag cement. Influence of activator nature
Fernandez-Jimenez, A., & Puertas, F. (2001) · Advances in Cement Research · doi:10.1680/adcr.13.3.115.39288 · Cited by 231
Alkali-activated slag cements: Kinetic studies
Fernández-Jiménez, A., & Puertas, F. (1997) · Cement and Concrete Research · doi:10.1016/s0008-8846(97)00040-9 · Cited by 227
Hydration kinetics in hybrid binders: Early reaction stages
Garcia-Lodeiro, I., Fernandez-Jimenez, A., & Palomo, A. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.03.025 · Cited by 224
Temperature and activator effect on early-age reaction kinetics of alkali-activated slag binders
Gebregziabiher, B. S., Thomas, R. J., & Peethamparan, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.098 · Cited by 207
Longhi, M. A., Rodríguez, E. D., Walkley, B., Zhang, Z., & Kirchheim, A. P. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107671 · Cited by 196
Self-citationRavikumar, D., & Neithalath, N. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.07.010 · Cited by 191
Effect of drying procedures on pore structure and phase evolution of alkali-activated cements
Zhang, Z., Zhu, Y., Zhu, H., Zhang, Y., Provis, J. L., & Wang, H. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.12.003 · Cited by 167
Self-citationDeir, E., Gebregziabiher, B. S., & Peethamparan, S. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.11.010 · Cited by 156
White, C. E., Provis, J. L., Llobet, A., Proffen, T. E., & van Deventer, J. S. J. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04515.x · Cited by 142
Zhang, D., Wang, D., Liu, Z., & Xie, F.-Z. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.205 · Cited by 123
Bligh, M. W., d’Eurydice, M. N., Lloyd, R. R., Arns, C. H., & Waite, T. D. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.01.007 · Cited by 113
Properties of alkali-activated ground granulated blast furnace slag blended with ferronickel slag
Cao, R., Li, B., You, N., Zhang, Y., & Zhang, Z. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.10.112 · Cited by 89
Self-citationMethod to Stop Geopolymer Reaction
Chen, X., Meawad, A., & Struble, L. J. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.13071 · Cited by 87
Cao, M., Ming, X., Yin, H. F., et al. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.01.030 · Cited by 87
Micromechanical properties of alkali-activated slag cement binders
Thomas, R. J., Gebregziabiher, B. S., Giffin, A., & Peethamparan, S. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.04.003 · Cited by 83
Online monitoring of cracking in concrete structures using embedded piezoelectric transducers
Dumoulin, C., Karaiskos, G., Sener, J.-Y., & Deraemaeker, A. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/11/115016 · Cited by 77
The Porous Network and its Interface inside Geopolymers as a Function of Alkali Cation and Aging
Melar, J., Guillaume Renaudin, A., Leroux, F., Hardy-Dessources, A., Nédélec, J., Taviot‐Guého, C., Petit, É., Steins, P., Poulesquen, A., & Frizon, F. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b02340 · Cited by 51
Liu, Z., Zhang, Y., Jiang, Q., Sun, G., & Zhang, W. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.04.034 · Cited by 37
Self-citationGong, K., Cheng, Y. Q., Daemen, L. L., & White, C. E. (2019) · Physical Chemistry Chemical Physics · doi:10.1039/c9cp00889f · Cited by 37
Martini, F., Borsacchi, S., Geppi, M., Tonelli, M., Ridi, F., & Calucci, L. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.05.031 · Cited by 36
Cited by
Hydration Characteristics and Microstructure of Alkali-Activated Slag Concrete: A Review
Fu, Q., Bu, M., Zhang, Z., Xu, W., Yuan, Q., & Niu, D. (2023) · Engineering · doi:10.1016/j.eng.2021.07.026 · Cited by 272
Self-citationRecent progress in understanding setting and hardening of alkali-activated slag (AAS) materials
Jiang, D., Shi, C., & Zhang, Z. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104795 · Cited by 165
Self-citationLao, J.-C., Xu, L.-Y., Huang, B.-T., Zhu, J.-X., Khan, M., & Dai, J.-G. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1142237 · Cited by 86
Metadata
- Authors
- Cao, R., Zhang, S., Banthia, N., Zhang, Y., & Zhang, Z.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 186
- Pages
- 107840
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W3003205297
- Cited by
- 254
- References
- 41
- FWCI
- 16.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.