The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Enhancing indentation and impact resistance in auxetic composite materials
Open accessAbstract
Abstract Auxetic materials exhibiting a negative Poisson's ratio are of great research interest due to their unusual mechanical responses and a wide range of potential deployment. However, due to the cellular structure and the bending or rotation deformation nature of the elements in auxetic materials, they usually have relative low stiffness, limiting their applications where high stiffness, strength, hardness, and energy absorption are simultaneously desired. To overcome this limitation, we apply the auxetic lattice structures as the reinforcements combining with the nearly incompressible soft materials as the matrix to create a class of high-performance composites. This coupled geometry and material design concept is enabled by the state-of-the-art additive manufacturing technique. Guided by static and dynamic experimental testing, we systematically study the indentation behavior of the 3D printed auxetics reinforced composites and achieve a significant enhancement of their indentation stiffness and impact resistance compared with the non-auxetic reinforced composites. By digital image correlation processing of experimental tests and numerical simulation, this improved mechanical performance is found due to two deformation mechanisms. The first mechanism is the negative Poisson's ratio effect of the auxetic reinforcements, which makes the matrix in a state of biaxial compression during indentation and impact and hence provides additional support. The second mechanism is the negative Poisson's ratio effect of the overall composites, which makes the auxetic reinforced composites denser at the site of the indentation and therefore are more resistant to indentation. The results show that auxetic structures can lead to design stiffer, harder and tougher composite materials. The material design strategy provides insights into the development of classes of novel auxetic composites with a wide range of mechanical and structural applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Foam Structures with a Negative Poisson's Ratio
Lakes, R. (1987) · Science · doi:10.1126/science.235.4792.1038 · Cited by 3,866
The mechanics of three-dimensional cellular materials
Gibson, I. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0088 · Cited by 1,885
Auxetic Materials: Functional Materials and Structures from Lateral Thinking!
Evans, K. E., & Alderson, A. (2000) · Advanced Materials · doi:10.1002/(sici)1521-4095(200005)12:9<617::aid-adma617>3.0.co;2-3 · Cited by 1,381
The mechanics of two-dimensional cellular materials
Gibson, L. J., Ashby, M. F., Schajer, G. S., & Robertson, C. I. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0087 · Cited by 1,253
Properties of a chiral honeycomb with a poisson's ratio of — 1
Prall, D., & Lakes, R. S. (1997) · International Journal of Mechanical Sciences · doi:10.1016/s0020-7403(96)00025-2 · Cited by 1,049
Kuribayashi, K., Tsuchiya, K., You, Z., Tomus, D., Umemoto, M., Ito, T., & Sasaki, M. (2006) · Materials Science and Engineering: A · doi:10.1016/j.msea.2005.12.016 · Cited by 755
Negative Poisson's ratios as a common feature of cubic metals
Baughman, R. H., Shacklette, J. M., Zakhidov, A. A., & Stafström, S. (1998) · Nature · doi:10.1038/32842 · Cited by 743
Auxetic Mechanical Metamaterials to Enhance Sensitivity of Stretchable Strain Sensors
Jiang, Y., Liu, Z., Matsuhisa, N., Qi, D., Leow, W. R., Yang, H., Yu, J., Chen, G., Liu, Y., Wan, C., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706589 · Cited by 542
Elasticity of α-Cristobalite: A Silicon Dioxide with a Negative Poisson's Ratio
Yeganeh-Haeri, A., Weidner, D. J., & Parise, J. B. (1992) · Science · doi:10.1126/science.257.5070.650 · Cited by 505
Reentrant Origami-Based Metamaterials with Negative Poisson’s Ratio and Bistability
Yasuda, H., & Yang, J. (2015) · Physical Review Letters · doi:10.1103/physrevlett.114.185502 · Cited by 500
Indentability of Conventional and Negative Poisson's Ratio Foams
Lakes, R. S., & Elms, K. (1993) · Journal of Composite Materials · doi:10.1177/002199839302701203 · Cited by 492
Bending behavior of sandwich composite structures with tunable 3D-printed core materials
Li, T., & Wang, L. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.05.001 · Cited by 403
Self-citationEngineering the shape and structure of materials by fractal cut
Cho, Y., Shin, J.-H., Costa, A., Kim, T. A., Kunin, V., Li, J., Lee, S. Y., Yang, S., Han, H. N., Choi, I.-S., et al. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1417276111 · Cited by 366
Tailoring Graphene to Achieve Negative Poisson's Ratio Properties
Grima, J. N., Winczewski, S., Mizzi, L., Grech, M. C., Cauchi, R., Gatt, R., Attard, D., Wojciechowski, K. W., & Rybicki, J. (2015) · Advanced Materials · doi:10.1002/adma.201404106 · Cited by 336
Self-assembly of coherently dynamic, auxetic, two-dimensional protein crystals
Suzuki, Y., Cardone, G., Restrepo, D., Zavattieri, P. D., Baker, T. S., & Tezcan, F. A. (2016) · Nature · doi:10.1038/nature17633 · Cited by 316
Jia, Z., Li, T., Chiang, F.-P., & Wang, L. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.11.015 · Cited by 242
Self-citationZhang, S. L., Lai, Y., He, X., Liu, R., Zi, Y., & Wang, Z. L. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606695 · Cited by 235
Indentation Resilience of Conventional and Auxetic Foams
Chan, N., & Evans, K. E. (1998) · Journal of Cellular Plastics · doi:10.1177/0021955x9803400304 · Cited by 232
Li, T., Hu, X., Chen, Y., & Wang, L. (2017) · Scientific Reports · doi:10.1038/s41598-017-09218-w · Cited by 120
Self-citation
Metadata
- Authors
- Li, T., Liu, F., & Wang, L.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 198
- Pages
- 108229
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W3039148292
- Cited by
- 349
- References
- 21
- FWCI
- 14.81
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.