The DOI matches its Crossref record; 136 of the 136 references it cites were found in a registry or an index.
Recent advancements of plant-based natural fiber–reinforced composites and their applications
Open accessAbstract
Abstract Demands for reducing energy consumption and environmental impacts are the major driving factors for the development of natural fiber–reinforced composites (NFRCs) in many sectors. Compared with synthesized fiber, natural fiber provides several advantages in terms of biodegradability, light weight, low price, life-cycle superiority, and satisfactory mechanical properties. However, the inherent features of plant-based natural fibers have presented challenges to the development and application of NFRCs, such as variable fiber quality, limited mechanical properties, water absorption, low thermal stability, incompatibility with hydrophobic matrices, and propensity to agglomeration. Substantial research has recently been conducted to address these challenges for improved performance of NFRCs and their applications. This article reviews the recent advancements of plant-based NFRCs, focusing on strategies and breakthroughs in enhancing the NFRCs’ performance, including fiber modification, fiber hybridization, lignocellulosic fillers incorporation, conventional processing techniques, additive manufacturing (3D printing), and new fiber source exploration. The sustainability of plant-based NFRCs using life-cycle assessment and the burgeoning applications of NFRCs with emphasis on the automotive industry are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
IOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
Degradation rates of plastics in the environment
Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06635 · Cited by 3,463
The plastic in microplastics: A review
Andrady, A. L. (2017) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2017.01.082 · Cited by 2,372
Are natural fiber composites environmentally superior to glass fiber reinforced composites?
Joshi, S. V., Drzal, L. T., Mohanty, A. K., & Arora, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.016 · Cited by 2,335
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Silane coupling agents used for natural fiber/polymer composites: A review
Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H., & Mai, C. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.005 · Cited by 2,244
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Rajak, D., Pagar, D., Menezes, P., & Linul, E. (2019) · Polymers · doi:10.3390/polym11101667 · Cited by 1,706
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
Characterization and properties of natural fiber polymer composites: A comprehensive review
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652
Green composites from sustainable cellulose nanofibrils: A review
Abdul Khalil, H. P. S., Bhat, A. H., & Ireana Yusra, A. F. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.078 · Cited by 1,573
Natural-fiber-reinforced polymer composites in automotive applications
Holbery, J., & Houston, D. (2006) · JOM · doi:10.1007/s11837-006-0234-2 · Cited by 1,565
Critical review of recent publications on use of natural composites in infrastructure
Dittenber, D. B., & GangaRao, H. V. S. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.019 · Cited by 1,515
Gurunathan, T., Mohanty, S., & Nayak, S. K. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.06.007 · Cited by 1,362
John, M. J., & Anandjiwala, R. D. (2008) · Polymer Composites · doi:10.1002/pc.20461 · Cited by 1,291
Green composites: A review of adequate materials for automotive applications
Koronis, G., Silva, A., & Fontul, M. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.07.004 · Cited by 1,198
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
Nanocellulose, a tiny fiber with huge applications
Abitbol, T., Rivkin, A., Cao, Y., Nevo, Y., Abraham, E., Ben-Shalom, T., Lapidot, S., & Shoseyov, O. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.01.002 · Cited by 1,006
Progress Report on Natural Fiber Reinforced Composites: Progress Report on Natural Fiber Composites
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300008 · Cited by 997
Fibre hybridisation in polymer composites: A review
Swolfs, Y., Gorbatikh, L., & Verpoest, I. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.08.027 · Cited by 944
On the use of nanocellulose as reinforcement in polymer matrix composites
Lee, K.-Y., Aitomäki, Y., Berglund, L. A., Oksman, K., & Bismarck, A. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.08.032 · Cited by 819
A Review on Potentiality of Nano Filler/Natural Fiber Filled Polymer Hybrid Composites
Saba, N., Tahir, P., & Jawaid, M. (2014) · Polymers · doi:10.3390/polym6082247 · Cited by 739
Ahmad, F., Choi, H. S., & Park, M. K. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201400089 · Cited by 672
Cellulose Fibers: Bio- and Nano-Polymer Composites: Green Chemistry and Technology
(2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7 · Cited by 626
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
A review on new bio-based constituents for natural fiber-polymer composites
Väisänen, T., Das, O., & Tomppo, L. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.132 · Cited by 560
Natural fiber reinforced polylactic acid composites: A review
Siakeng, R., Jawaid, M., Ariffin, H., Sapuan, S. M., Asim, M., & Saba, N. (2019) · Polymer Composites · doi:10.1002/pc.24747 · Cited by 524
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
Le Duigou, A., Castro, M., Bevan, R., & Martin, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.018 · Cited by 523
Mechanical properties of polypropylene composites: A review
Shubhra, Q. T., Alam, A., & Quaiyyum, M. (2013) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711428659 · Cited by 508
HUDA, M., DRZAL, L., MOHANTY, A., & MISRA, M. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.10.015 · Cited by 489
Kim, H.-S., Lee, B.-H., Choi, S.-W., Kim, S., & Kim, H.-J. (2007) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2007.01.004 · Cited by 426
Review of the applications of biocomposites in the automotive industry
Akampumuza, O., Wambua, P. M., Ahmed, A., Li, W., & Qin, X. (2017) · Polymer Composites · doi:10.1002/pc.23847 · Cited by 420
Fiore, V., Scalici, T., & Valenza, A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.016 · Cited by 417
Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced composites
Cai, M., Takagi, H., Nakagaito, A. N., Li, Y., & Waterhouse, G. I. N. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.08.025 · Cited by 414
Tensile properties of kenaf fiber due to various conditions of chemical fiber surface modifications
Mahjoub, R., Yatim, J. M., Sam, A. R. M., & Hashemi, S. H. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.01.036 · Cited by 407
Chemical Composition of Natural Fibers and its Influence on their Mechanical Properties
Komuraiah, A., Kumar, N. S., & Prasad, B. D. (2014) · Mechanics of Composite Materials · doi:10.1007/s11029-014-9422-2 · Cited by 399
Characterization of a novel natural cellulosic fiber from Juncus effusus L.
Maache, M., Bezazi, A., Amroune, S., et al. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.04.096 · Cited by 389
Characterization of new natural cellulosic fiber from Lygeum spartum L.
Belouadah, Z., Ati, A., & Rokbi, M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.08.024 · Cited by 364
Yusoff, R. B., Takagi, H., & Nakagaito, A. N. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.09.017 · Cited by 341
Polymer matrix nanocomposites for automotive structural components
Naskar, A. K., Keum, J. K., & Boeman, R. G. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.262 · Cited by 316
Chakrabarty, A., & Teramoto, Y. (2018) · Polymers · doi:10.3390/polym10050517 · Cited by 302
Lertwattanaruk, P., & Suntijitto, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.07.154 · Cited by 292
Hemp fiber reinforced polypropylene composites: The effects of material treatments
Sullins, T., Pillay, S., Komus, A., & Ning, H. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.02.001 · Cited by 291
Influence of alkali treatment on internal microstructure and tensile properties of abaca fibers
Cai, M., Takagi, H., Nakagaito, A. N., Katoh, M., Ueki, T., Waterhouse, G. I. N., & Li, Y. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.11.048 · Cited by 278
Processing and characterization of polyethylene-based composites
KHANAM, P. N., & Al‐Maadeed, M. A. A. (2015) · Advanced Manufacturing Polymer & Composites Science · doi:10.1179/2055035915y.0000000002 · Cited by 253
Surface-modified nano-cellulose as reinforcement in poly(lactic acid) to conform new composites
Robles, E., Urruzola, I., Labidi, J., & Serrano, L. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.03.075 · Cited by 247
Fracture behaviour of bamboo fiber reinforced epoxy composites
Khan, Z., Yousif, B. F., & Islam, M. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.02.015 · Cited by 235
Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printing
Murphy, C. A., & Collins, M. N. (2018) · Polymer Composites · doi:10.1002/pc.24069 · Cited by 233
Study on short ramie fiber/poly(lactic acid) composites compatibilized by maleic anhydride
Yu, T., Jiang, N., & Li, Y. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.05.008 · Cited by 226
Ridzuan, M. J. M., Majid, M. S. A., AFENDI, M., Kanafiah, S. N. A. M., Zahri, J. M., & Gibson, A. G. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.10.052 · Cited by 222
Environmental and resource aspects of sustainable biocomposites
Vilaplana, F., Strömberg, E., & Karlsson, S. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.07.016 · Cited by 218
Novel cellulose fibre reinforced thermoplastic materials
Ganster, J., & Fink, H. (2006) · Cellulose · doi:10.1007/s10570-005-9045-9 · Cited by 218
Yahaya, R., Sapuan, S. M., Jawaid, M., Leman, Z., & Zainudin, E. S. (2015) · Defence Technology · doi:10.1016/j.dt.2015.08.005 · Cited by 212
Björklund, A., & Finnveden, G. (2005) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2004.12.002 · Cited by 206
Green Composites Made of Bamboo Fabric and Poly (Lactic) Acid for Packaging Applications—A Review
Nurul Fazita, M. R., Jayaraman, K., Bhattacharyya, D., Mohamad Haafiz, M. K., Saurabh, C., Hussin, M., & H.P.S., A. (2016) · Materials · doi:10.3390/ma9060435 · Cited by 206
3D-Printed Wood: Programming Hygroscopic Material Transformations
Correa, D., Papadopoulou, A., Guberan, C., Jhaveri, N., Reichert, S., Menges, A., & Tibbits, S. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0022 · Cited by 202
Duflou, J. R., Deng, Y., Van Acker, K., & Dewulf, W. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.33 · Cited by 200
Self-citationCellulose nanocrystal: A promising toughening agent for unsaturated polyester nanocomposite
Kargarzadeh, H., M. Sheltami, R., Ahmad, I., Abdullah, I., & Dufresne, A. (2015) · Polymer · doi:10.1016/j.polymer.2014.11.054 · Cited by 192
Du, Y., Wu, T., Yan, N., Kortschot, M. T., & Farnood, R. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.09.012 · Cited by 191
Biofunctionalization of Natural Fiber-Reinforced Biocomposites for Biomedical Applications
Tavares, T. D., Antunes, J. C., Ferreira, F., & Felgueiras, H. P. (2020) · Biomolecules · doi:10.3390/biom10010148 · Cited by 188
El-Sabbagh, A. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.09.047 · Cited by 184
Salleh, F. M., Hassan, A., Yahya, R. B., & Azzahari, A. D. (2013) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.10.068 · Cited by 179
Jabbar, A., Militký, J., Wiener, J., Kale, B. M., Ali, U., & Rwawiire, S. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.11.062 · Cited by 178
Studies on Natural/Glass Fiber Reinforced Polymer Hybrid Composites: An Evolution
Sanjay, M., & Yogesha, B. (2017) · Materials Today: Proceedings · doi:10.1016/j.matpr.2017.02.151 · Cited by 174
Artichoke (Cynara cardunculus L.) fibres as potential reinforcement of composite structures
Fiore, V., Valenza, A., & Bella, G. D. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.04.003 · Cited by 163
Hamou, K. B., Kaddami, H., Magnin, A., Dufresne, A., & Ahmad, A. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.081 · Cited by 162
Moigne, N. L., Longerey, M., Taulemesse, J.-M., Bénézet, J., & Bergeret, A. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.11.022 · Cited by 160
Mechanical and thermal properties of Posidonia oceanica cellulose nanocrystal reinforced polymer
Bettaieb, F., Khiari, R., Dufresne, A., Mhenni, M. F., & Belgacem, M. N. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.01.026 · Cited by 157
Mostafa, M., & Uddin, N. (2016) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2016.07.001 · Cited by 156
Rojas-Herrera, C., Cea, M., Iriarte, A., et al. (2019) · Sustainable materials and technologies · doi:10.1016/j.susmat.2019.e00102 · Cited by 155
Cisneros‐López, E. O., González‐López, M. E., Pérez‐Fonseca, A. A., González‐Núñez, R., Rodrigue, D., & Robledo‐Ortíz, J. R. (2016) · Composite Interfaces · doi:10.1080/09276440.2016.1184556 · Cited by 152
Barari, B., Omrani, E., Moghadam, A. D., Menezes, P. L., Pillai, K. M., & Rohatgi, P. K. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.03.097 · Cited by 151
Porras, A., Marañón, A., & Ashcroft, I. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.12.033 · Cited by 150
Hinchcliffe, S. A., Hess, K. M., & Srubar, W. V. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.03.089 · Cited by 145
Glass Fibre Strength—A Review with Relation to Composite Recycling
Thomason, J. L., Jenkins, P., & Yang, L. (2016) · Fibers · doi:10.3390/fib4020018 · Cited by 143
Characterization of blue agave bagasse fibers of Mexico
Satyanarayana, K. G., Flores‐Sahagun, T. H. S., dos Santos, L. P., dos Santos, J., Mazzaro, I., & Mikowski, A. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.09.001 · Cited by 141
Biological Degradation of Polymers in the Environment
Glaser, J. A. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.85124 · Cited by 139
Peng, Y., Liu, R., Cao, J., & Chen, Y. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.08.140 · Cited by 137
Strength improvement in injection-molded jute-fiber-reinforced polylactide green-composites
Arao, Y., Fujiura, T., Itani, S., & Tanaka, T. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.08.032 · Cited by 137
Peng, Y., Liu, R., & Cao, J. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.01.147 · Cited by 136
Sato, A., Kabusaki, D., Okumura, H., Nakatani, T., Nakatsubo, F., & Yano, H. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.11.009 · Cited by 135
Natural fiber nonwoven reinforced cement composites as sustainable materials for building envelopes
Claramunt, J., Fernández-Carrasco, L., Ventura, H., & Ardanuy, M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.04.044 · Cited by 134
Mechanical properties of Napier grass fibre/polyester composites
J.A., M. H., Majid, M. S. A., AFENDI, M., Marzuki, H. F. A., Fahmi, I., & Gibson, A. G. (2015) · Composite Structures · doi:10.1016/j.compstruct.2015.09.051 · Cited by 132
Effects of wood fiber surface chemistry on strength of wood–plastic composites
Migneault, S., Koubaa, A., Perré, P., & Riedl, B. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.03.010 · Cited by 131
Neto, A. R. D. S., Araujo, M. A. M., Barboza, R. M. P., Fonseca, A. D. S., Tonoli, G. H. D., Souza, F. V. D., Mattoso, L. H. C., & Marconcini, J. M. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.10.042 · Cited by 131
Processing of PLA/sisal fiber biocomposites using direct- and extrusion-injection molding
Chaitanya, S., & Singh, I. (2016) · Materials and Manufacturing Processes · doi:10.1080/10426914.2016.1198034 · Cited by 129
Scalici, T., Fiore, V., & Valenza, A. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.03.053 · Cited by 128
Kalagi, G., Patil, R. K., & Nayak, N. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.11.043 · Cited by 126
Modification of interfacial adhesion with a functionalized polymer in PLA/wood composites
Csikós, Á., Faludi, G., Domján, A., Renner, K. E., Móczó, J., & Pukánszky, B. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.03.032 · Cited by 122
Couture, A., Lebrun, G., & Laperrière, L. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.07.069 · Cited by 118
Rojas, C. F., Brughmans, G., Tran, L. Q. N., Dupont-Gillain, C. C., Verpoest, I., & Vuure, A. W. V. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.01.013 · Cited by 113
Xia, C., Yu, J., Shi, S. Q., Qiu, Y., Cai, L., Wu, H. F., Ren, H. T., Nie, X., & Zhang, H. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.01.044 · Cited by 113
Plant fibre-reinforced polymers: where do we stand in terms of tensile properties?
Fortea-Verdejo, M., Bumbaris, E. K., Burgstaller, C., Bismarck, A., & Lee, K. (2017) · International Materials Reviews · doi:10.1080/09506608.2016.1271089 · Cited by 109
Iyer, K. A., Schueneman, G. T., & Torkelson, J. M. (2014) · Polymer · doi:10.1016/j.polymer.2014.11.017 · Cited by 108
Sisal Fiber Based Polymer Composites and Their Applications
Saxena, M., Pappu, A., Haque, R., & Sharma, A. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_22 · Cited by 106
Calabrese, L., Fiore, V., Scalici, T., & Valenza, A. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47203 · Cited by 106
Abbassi, F.-E. E., Assarar, M., Ayad, R., & Lamdouar, N. (2015) · Composite Structures · doi:10.1016/j.compstruct.2015.07.112 · Cited by 105
Ramesh, M., Palanikumar, K., & Reddy, K. H. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42968 · Cited by 97
Soccalingame, L., Bourmaud, A., Perrin, D., Bénézet, J., & Bergeret, A. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.01.020 · Cited by 95
Seggiani, M., Cinelli, P., Mallegni, N., Balestri, E., Puccini, M., Vitolo, S., Lardicci, C., & Lazzeri, A. (2017) · Materials · doi:10.3390/ma10040326 · Cited by 93
Barari, B., Ellingham, T., Qamhia, I. I. A., Pillai, K. M., Elhajjar, R. F., Turng, L., & Sabo, R. C. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.08.040 · Cited by 92
Feldmann, M., Heim, H., & Zarges, J. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.03.028 · Cited by 92
Heat treated wood–nylon 6 composites
Aydemir, D., Kızıltaş, A., Kiziltas, E. E., Gardner, D. J., & Gündüz, G. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.08.040 · Cited by 89
Development of continuous process enabling nanofibrillation of pulp and melt compounding
Suzuki, K., Okumura, H., Kitagawa, K., Sato, S., Nakagaito, A. N., & Yano, H. (2012) · Cellulose · doi:10.1007/s10570-012-9843-9 · Cited by 88
Siqueira, G. D. F., Oksman, K., Tadokoro, S. K., & Mathew, A. P. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.12.001 · Cited by 85
A recyclability study of bagasse fiber reinforced polypropylene composites
Lila, M. K., Singhal, A. K., Banwait, S. S., & Singh, I. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.05.001 · Cited by 85
Suzuki, K., Sato, A., Okumura, H., Hashimoto, T., Nakagaito, A. N., & Yano, H. (2013) · Cellulose · doi:10.1007/s10570-013-0143-9 · Cited by 83
Influence of hemp fibers with modified surface on polypropylene composites
Panaitescu, D. M., Nicolae, C. A., Vuluga, Z., Vițelaru, C., Sanporean, C., Zaharia, C., Florea, D., & Vasilievici, G. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.03.018 · Cited by 83
Graupner, N., Fischer, H., Ziegmann, G., & Müssig, J. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.05.002 · Cited by 82
Woven Kenaf/Kevlar Hybrid Yarn as potential fiber reinforced for anti-ballistic composite material
Jambari, S., Yahya, M. Y., Abdullah, M. R., & Jawaid, M. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-6950-0 · Cited by 79
Effect of chain structure on the properties of Glass fibre/polyethylene composites
Al‐Maadeed, M. A. A., Ouederni, M., & KHANAM, P. N. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.11.063 · Cited by 75
Pérez‐Fonseca, A. A., Robledo‐Ortíz, J. R., Ramírez‐Arreola, D. E., Gudiño, P. O., Rodrigue, D., & González‐Núñez, R. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.07.025 · Cited by 72
Xia, C., Ren, H. T., Shi, S. Q., Zhang, H., Cheng, J., Cai, L., Chen, K., & Tan, H.-S. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.202 · Cited by 72
Rodríguez, L. J., Peças, P., Carvalho, H., & Orrego, C. E. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.110308 · Cited by 68
Model for End of Life Treatment of Polymer Composite Materials
Åström, A. H. (2005) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 64
Porras, A., Marañón, A., & Ashcroft, I. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.11.008 · Cited by 62
Shi, S., Yang, C., & Nie, M. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02448 · Cited by 60
Guaruman fiber: another possible reinforcement in composites
Reis, R. H. M., Nunes, L. F., Oliveira, M. S., da Veiga, V. F., Filho, F. D. C. G., Pinheiro, M. A., Cândido, V. S., & Monteiro, S. N. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.11.002 · Cited by 60
New Polylactic Acid Composites Reinforced with Artichoke Fibers
Botta, L., Fiore, V., Scalici, T., Valenza, A., & Scaffaro, R. (2015) · Materials · doi:10.3390/ma8115422 · Cited by 58
Gigante, V., Aliotta, L., Phuong, V. T., Coltelli, M., Cinelli, P., & Lazzeri, A. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.09.008 · Cited by 56
Guleria, A., Singha, A. S., & Rana, R. K. (2016) · Advances in Polymer Technology · doi:10.1002/adv.21646 · Cited by 53
George, M., & Bressler, D. C. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.091 · Cited by 46
A review on dielectric properties of biofiber-based composites
Bhuvaneswari, H. B., & Reddy, N. (2018) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-018-0053-2 · Cited by 45
Khanlou, H. M., WOODFIELD, P. L., Summerscales, J., & Hall, W. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.03.004 · Cited by 38
Muñoz, N. M., Sanoguera, D. G., Segui, V. J., Fenollar, O., & Boronat, T. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-1025-2 · Cited by 38
Crystallization of polypropylene in the presence of biomass-based fillers of different compositions
Gironès, J., Vo, L. T. T., Haudin, J. M., Freire, L., & Navard, P. (2017) · Polymer · doi:10.1016/j.polymer.2017.09.006 · Cited by 37
Fabrizio Sarasini, A., Tirillò, J., Puglia, D., Kenny, J. M., Dominici, F., Santulli, C., Tofani, M., & Santis, R. D. (2015) · RSC Advances · doi:10.1039/c5ra00832h · Cited by 36
Fibre orientation of novel dynamically sheet formed discontinuous natural fibre PLA composites
Efendy, M. G. A., & Pickering, K. L. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.07.003 · Cited by 31
Xie, L., Shan, B., Sun, X., Tian, Y., Xie, H., He, M., Xiong, Y., & Zheng, Q. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03101 · Cited by 31
Kim, S., Kim, E.-S., Choi, K., et al. (2018) · Cellulose · doi:10.1007/s10570-018-2122-7 · Cited by 31
Badji, C., Beigbeder, J., Garay, H., Bergeret, A., Bénézet, J., & Desauziers, V. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.12.015 · Cited by 30
Characterization and structural performance of hybrid fiber-reinforced composite deck panels
Gopinath, R., Poopathi, R., & Saravanakumar, S. S. (2019) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-019-00076-w · Cited by 30
Wu, C.-S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.07.012 · Cited by 20
Huang, P., Shi, S., Liu, Y., Nie, M., & Wang, Q. (2017) · RSC Advances · doi:10.1039/c7ra05095j · Cited by 7
Cited by
Rajeshkumar, G., Arvindh Seshadri, S., Devnani, G. L., Sanjay, M. R., Siengchin, S., Prakash Maran, J., Al-Dhabi, N. A., Karuppiah, P., Mariadhas, V. A., Sivarajasekar, N., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127483 · Cited by 640
Sustainable Fiber‐Reinforced Composites: A Review
Maiti, S., Islam, M. R., Uddin, M. A., Afroj, S., Eichhorn, S. J., & Karim, N. (2022) · Advanced Sustainable Systems · doi:10.1002/adsu.202200258 · Cited by 493
Andrew, J. J., & Dhakal, H. N. (2022) · Composites Part C: Open Access · doi:10.1016/j.jcomc.2021.100220 · Cited by 491
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
(Bio)Nanotechnology in Food Science—Food Packaging
Primožič, M., Knez, Ž., & Leitgeb, M. (2021) · Nanomaterials · doi:10.3390/nano11020292 · Cited by 290
Metadata
- Authors
- Li, M., Pu, Y., Thomas, V. M., Yoo, C. G., Ozcan, S., Deng, Y., Nelson, K., & Ragauskas, A. J.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 200
- Pages
- 108254
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W3047631905
- Cited by
- 755
- References
- 136
- FWCI
- 30.59
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.