The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber
Open accessAbstract
This study developed a novel ultra-high ductile concrete (UHDC) for 3D concrete printing , which was modified using crumb rubber to possess high ductility. Flowability tests were conducted to determine optimal open time range for continuous printing. A series of mechanical tests, including uniaxial tensile test , compressive test , flexural test and double shear test, were carried out to investigate the anisotropic-mechanical properties of the printed UHDC. The results indicate that the tensile strength , flexural strength and shear strength of the printed specimens were slightly lower than those of mold-cast specimens, while reverse tendency was observed in compressive strength . It is of interest that the deformability and energy dissipation of the printed UHDC at some directions are higher than those of mold-cast UHDC. Additionally, it is found that the printed UHDC performed minimal anisotropy in flexural strength, but significant anisotropy in flexural deformability, compressive and flexural energy dissipation capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378
Cited by
Utilization of fibers in ultra-high performance concrete: A review
Gong, J., Ma, Y., Fu, J., Hu, J., Ouyang, X., Zhang, Z., & Wang, H. (2022) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.109995 · Cited by 360
Metadata
- Authors
- Ye, J., Cui, C., Yu, J., Yu, K., & Xiao, J.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 211
- Pages
- 108639
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W3125569382
- Cited by
- 228
- References
- 1
- FWCI
- 16.71
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber. https://app.cochat.ai/papers/10.1016/j.compositesb.2021.108639
- The paper
- Ye, J., Cui, C., Yu, J., Yu, K., & Xiao, J. (2021). Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber. Composites Part B: Engineering. https://doi.org/10.1016/j.compositesb.2021.108639
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.